Availability
You can get up to 50 percent more starting power when you pick Summit Racing™ high-torque mini starters. They're 40 percent lighter, as well as 1/3 smaller. That latter characteristic translates into increased clearance, but both factors can be equally important in a race car. So can features such as full ball-bearing construction, which allows these starters to work great while lasting a long time.
( 697 )
$177.99
—
$214.99
Borgeson's Street and Performance Series steering boxes are modern quick ratio units specially designed to replace the Saginaw/Delphi 800 Series in 1965 and up GM vehicles and 1968-86 Chevy C10 and K10 trucks. These Street and Performance power steering boxes will bolt directly to the stock location and fit to the original power steering pitman arms. Adapters are included with each steering box to be able to use either O-ring or flare style hose connections. All Borgeson power steering boxes are assembled and quality tested in-house to ensure you get the best possible replacement for your vehicle. Note: Vehicles switching from manual steering will require a power steering pitman arm (not included).
( 239 )
$467.78
—
$504.00
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1525 )
$269.99
—
$319.99
Painless Performance 27-circuit Classic-Plus customizable GM truck chassis harnesses are designed to fit a wide range of trucks, Blazers, and Suburbans—whether C10, C20, or C30. They feature a factory-style bulkhead connector, allowing for easy mounting of the fuse block in the factory location, and have many factory connectors already installed on the harness out of the box. Each wire is custom-printed with the circuit identification, as well as using the GM color codes for easy installation. Wire your Squarebody once—and wire it right with these Painless 27-circuit Classic-Plus customizable GM truck chassis harnesses! Additional features and benefits include: * Each harness comes open-ended (headlight and taillight wiring) with extra length and can be paired with light socket kits (also available by Painless, but sold separately) * Included connectors for: the headlight switch, dimmer switch, wiper motor, ignition switch, blower motor and switch, blower resistor, and instrument cluster
( 35 )
$679.99
Our Summit Performance® headers are manufactured from mandrel-bent tubing for superior flow and greater horsepower. The headers feature a pressure-formed collector for a better flow rate and a JIG-welded tube-to-flange plate for a perfect fit. They're made for off-road and racing use only. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. The headers are available in a wide range of styles, sizes, and configurations. Order the pair recommended for your application. (Special warning regarding Summit Racing™ painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)
( 2017 )
$186.99
—
$399.99
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 192 )
$119.99
—
$191.99
Summit Bucks
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 501 )
$623.99
—
$1,279.99
If you're looking to convert over to LED headlights in your classic car or truck, Summit Racing™ direct-fit LED Headlights bulbs will help you see the light. Available with options that include sealed or unsealed, round or rectangular, and single or dual-beam capabilities, you're sure to find what you're looking for. Add some modern capabilities to your favorite ride with the Summit Racing™ direct-fit LED headlights best suited for your application.
( 82 )
$79.99
—
$199.99
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
( 2 )
$399.99
—
$799.91
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 906 )
$224.99
—
$339.99
Dakota Digital RTX direct-fit gauge kits retain your classic vehicle's stock look without sacrificing the late-model features you love. Every effort was made to incorporate OEM design elements regarding the layout, face styling, and indicators. Starting from scratch, these CNC-machined cluster housings are filled with electronics that raise the bar--in fact, the high-def message centers can be configured to display just about any piece of information needed. The RTX Series utilizes a central control box to make installation and setup as easy as possible. Choose the model with gauges and features designed to fit your specific vehicle.
( 101 )
$1,676.75
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 8 )
$3,625.99
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 416 )
$299.99
—
$419.99
With their gear-reduction drives, heavy-duty Powermaster PowerMax starters really crank out the power--180 lb.-ft. of torque. So, they can handle engines with moderate compression ratios. If your stock starter clears your oil pan, the Powermaster PowerMax starters will, too. Some will also clear kicked-out pans. Powermaster PowerMax starters can be mounted in multiple orientations to fit your needs. Starter dyno reports are included.
( 1148 )
$141.99
—
$260.99
Summit Racing™ Pro LS Swap aluminum radiator and fan combo kits are available for most popular LS swap applications. The kits include a quality-constructed aluminum radiator to provide exceptional weight savings over stock equipment, fan shroud, and a radiator cap. The radiators come in a variety of configurations, each possessing their own unique combination of features, to work for the specific make and model vehicle that they're intended. Install one of these cooling aluminum radiator and fan combos in the front of the engine bay to neutralize the threat of overheating. Select the Pro LS Swap radiator and fan shroud combo designed for your application.
( 1 )
$979.99
—
$989.99
Summit Racing™ LS conversion headers are made of 304 stainless steel and offer great quality, performance, and affordability. These will allow you to swap an LS into almost anything and provide more clearance than manifolds at the collectors. Our headers are mandrel bent, TIG-welded, and feature a polished stainless steel construction. They also feature V-Band collector construction, collector merge spikes, and include collector stubs, bolts, and graphite manifold gaskets for easy installation.
( 23 )
$289.99
The timeless styling of Cragar S/S Super Sport wheels is a great look for any American musclecar--old or new! Cragar 61C Series S/S wheels offer a classic 5-spoke pattern in a beautiful mirror chrome finish, making them eye-catching classics just right for your ride. Their composite construction features chrome plated steel rims mated to aluminum alloy centers--no polishing is needed, leaving you more time for cruising! And these 61 Series original S/S designs afford you the advantage of direct bolt fitment in various widths and diameters. Give your muscle updated versions of the most popular wheels ever--Cragar 61C Series S/S Super Sport wheels.
( 294 )
$283.99
—
$346.87
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 16 )
$1,417.99
—
$1,470.99
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 237 )
$837.00
—
$1,403.00
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 104 )
$1,999.95
—
$2,149.95
$1,798.95
—
$1,933.95
QA1 GM 2.0 Street control arms provide increased positive caster compared to OE arms and are among the lightest available. These arms feature a lower unsprung weight and improved performance without sacrificing durability. Each arm includes a QA1 integrated ball joint design which is stronger than OEM and rebuildable for tunability, providing long-term reliable service. These arms are designed with billet cross shafts for reduced weight and durability for the long haul. Double-sheer lower mounts are coil-over ready for a clean installation. QA1 GM 2.0 Street control arms look incredible and use no unsightly additional adapters! Form meets function with these newly designed arms that look and perform great without requiring painstaking restoring like factory stamped steel control arms.
( 22 )
$588.82
—
$854.95
Nothing could make re-wiring your Chevy/GMC truck any easier than Painless Performance harnesses. By adding a factory-style bulkhead connector and additional GM connectors, Painless made their universal harness a custom fit for these popular 2x4 and 4x4 GMC/Chevy pickups. These harnesses will work on pickups, Blazers and Suburbans. Includes circuits for: * Air conditioning * Heat * Camper cover lights * Cigarette lighter * Four wheel drive switch * Backup lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn (relay) * Ignition coil * Instrument panel lighting and gauges * Park lights * Power antenna * Power door locks * Power windows * Radio/clock (constant and switched) * Starting * Taillights * Third brake lights * Turn signals * Wipers and washer pump
( 43 )
$635.99
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1798 )
$134.99
—
$475.99
Swapping a GM LS based engine just got a lot easier! Summit Racing™ Pro LS cast aluminum oil pans are specifically designed to install an LS engine in a variety of GM muscle car and truck chassis. These pans offer OEM fitment, oil filter mounting, oil cooler provisions, and use OEM-style gaskets. They are manufactured from cast aluminum to provided proper structural rigidity and heat dissipation. The pans include a baffle, oil pickup tube, sump plug, oil filter stud, and oil passage cover.
( 18 )
$379.99
—
$399.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
