Availability
On Sale
These magnetic oil drain plugs from Mr. Gasket accumulate metal particles found in the oil, preventing possible damage to the engine. Best of all, they're not only quality-made, they're totally affordable protection for your investment!
( 26 )
$17.60
$15.84
On Sale
Chrome plated for beauty and durability, these Y-wing bolts from Mr. Gasket make valve cover removal fast and easy. They are precision-engineered and feature extra-long threads.
( 23 )
$18.34
$16.51
On Sale
MSD Chevrolet distributor O-ring kits are designed to fit onto the lower shaft of the distributor, just above the gear. They are made of high-grade rubber and will keep the distributor shaft securely in place at operating rpm.
( 4 )
$21.05
$18.95
On Sale
These fuel pump block-off plates cover the opening left when you convert from a mechanical to an electric fuel pump. They're made from precision-cut steel that's highly polished and chrome plated. Gaskets are included.
( 28 )
$13.99
$12.59
On Sale
These fuel pump mounting plates mount behind your mechanical fuel pump for carbureted small block Chevy V8 and 90 degree V6 engines. They add a touch of shine to the area behind your fuel pump, and even come with a gasket.
( 10 )
$18.31
$16.48
On Sale
Since you're installing that new distributor, you'll need to hold it down with something. Why not use one of Mr. Gasket's hold-down distributor clamps? Made from heavy gauge steel, these clamps are the perfect way to dress up the engine compartment.
( 27 )
$11.44
$10.30
On Sale
Brothers Trucks bed mounting pads are for trucks with wood beds. Available for short and long beds, these rubber pads are used between the bed cross sills and the frame rails to avoid metal-to-metal contact and prevent the bed from making noise where it contacts the frame. Select the kit packaged for your bed.
( 3 )
$16.65
$14.99
On Sale
ACCEL C-Cut Performance spark plugs ignite a better path to high performance for both street and strip applications. Their ground strap aligns with the centerline of the electrode to create a much-improved electrical pathway. This design reduces quenching, shrouding, and obstruction, allowing a hotter, larger flame, better firing energy, and a complete burn. Unshroud the spark to ignite your vehicle's performance; order the ACCEL C-Cut Performance spark plugs designed to fit your engine. More product features include: * Greater fuel efficiency, reduced emissions, increased performance, and better throttle response * Helps eliminate misfiring, rough idle, and overall poor performance * Copper core outperforms iridium and platinum * Machine-rolled threads protect your valuable cylinder heads * Sizes and sets available for thousands of applications
( 396 )
$23.65
$21.29
On Sale
The zinc plated smaller-than-standard hex heads on Mr. Gasket self-locking oil pan bolt kits are ideal for tight spaces. The flange head designs keep the bolt from falling into the socket. Special serrations prevent loosening, and the flange gives uniform clamping pressure.
( 5 )
$20.11
$18.10
On Sale
Welcome to Brothers Trucks, your source for classic truck restoration parts. Brothers offers tail lamp bezels to replace your missing, damaged, or dented originals. These quality reproduction bezels are a high-luster aluminum with a factory-like clear anodizing to help protect them from the elements. The bezels are available to fit the driver or passenger side of your truck. Bezels are sold individually or as a pair; order the bezels for your application needs.
Not Yet Reviewed
$19.79
$10.88
On Sale
Made with new tooling for an excellent fit and finish, Holley Classic Trucks pillar moldings include all factory mounting points for an easy installation. The moldings are available for a variety of vehicles and positions. When it comes to a vehicle restoration project, the body and exterior are only half of the equation. To really complete the job, you will also need to finish the interior as well. For all of your restoration part and accessory needs, including interior pillar molding trim, look to Holley Classic Trucks.
Not Yet Reviewed
$26.49
$14.57
On Sale
Mr. Gasket timing tabs are precision-manufactured and bolt on using your existing timing cover bolts. They're made from quality materials, with a pleasing finish that will complement any engine. They'll work with either factory or aftermarket timing covers, so you're covered either way.
( 49 )
$18.34
$16.51
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 54 )
$19.99
$16.99
—
$17.99
On Sale
Why reuse your old dowel pins when you have machine work done on your block? I can't think of a good reason, especially when these Mr. Gasket dowel pins are inexpensive and readily available. They are made from high quality steel, precision machined and case hardened for accurate cylinder head alignment.
( 4 )
$20.29
$11.16
On Sale
These Professional Products Powerfilter oil filters feature a fully machined housing and an extra-fine, double mesh, stainless steel washable filter element. These are not only terrific filters for high-buck race engines, but they also add a touch of class and protection to street rods and street machines. Professional Products oil filters are vastly superior to standard paper elements that have to be replaced every few thousand miles. Additional features include: * CNC-machined to provide exacting tolerances and fit * Quad bypass filter design ensures that no unfiltered oil reaches the engine * O-rings on all sealing joints * Duplex-woven, deep-pleated, 45-micron stainless filter element * Easy-maintenance cleanable s/s filter element * Magnet in base to collect tiny particles
( 2 )
$22.99
$20.69
On Sale
Tilt steering columns are much easier to service with OEM Automotive Tools steering pivot pin removers. When your toolbox is equipped with one of these handy gadgets it is easier to remove the pin without causing any damage to the column. They are made from quality materials and can be used with simple hand tools.
( 12 )
$13.99
$12.59
On Sale
Decades of heat and sun can cause a lot of the plastic interior pieces of your square body to become brittle, faded, and break. One of these common parts are the air vents. Holley Classic Trucks replacement air vent outlets are the perfect solution to renew the look of your interior. They're made with precise tooling for an excellent fit and finish and include all factory mounting points for an easy installation. Select the in-dash air vent outlets designed to fit your vehicle.
( 2 )
$26.49
$14.57
On Sale
PIAA Silicone wiper blade refills ensure greater visibility by coating the windshield with silicone to promote continuous water-beading in inclement weather. Water beads up into droplets that are easily removed by ordinary wiping at low speeds. At higher rates of travel, wind pressure pushes the water off the windshield, often without requiring the wipers. PIAA Silicone wiper refills re-apply the silicone with every wipe and will fit Super Silicone, Aero Vogue, and some OE wiper frames. Other product features include: * Reduces drag and eliminates annoying and inefficient chattering, regardless of the shape of the windshield * Silicone wipers last up to two times longer than standard wipers * Available in sizes ranging from 12 in. up to 28 in. * Rubber claw width is 6mm for sizes 12 in. up to 22 in. and 8mm for sizes 24 in. up to 28 in.
( 18 )
$11.99
—
$19.99
$10.79
—
$17.99
On Sale
Brothers Trucks offers window moldings as quality replacements for your windshield, rear window, and door windows. Stamped from new tooling for a precise fit and look, all window moldings are EDP coated for corrosion protection and include factory mounting points for an easy installation. When it comes to a restoration project, the body and exterior are only half of the equation. To really complete the job, you'll need to finish the interior as well. Brothers Trucks has all of the parts and accessories for a wide range of Chevy and GMC applications. Order the window molding designed for your vehicle.
Not Yet Reviewed
$22.50
—
$35.77
$12.38
—
$19.67
On Sale
Offering a long-life solution for every driver, K&N's performance technology is now available in a premium 18,000-mile filter to provide extended life compared to traditional 12,000-mile disposable filters. With a premium synthetic or cellulose blend filter media, based on application, these air filters provide up to 99 percent engine protection for your vehicle. They are designed to meet or exceed OEM specifications and will install easily into your factory air box in minutes. Since 1969, K&N has been the #1 brand in performance air filtration—bringing you the best in performance and protection for whatever type of vehicle that you drive. Product Overview: * Rugged construction—K&N extended life air filters are manufactured with durable, premium materials to last for up to 18,000 miles of use * Provides 50 percent longer life compared to standard 12,000-mile filters * Superior filtration and protection—K&N uses a premium filter media that provides up to 99 percent efficiency to protect your engine * Engine air filter only needs to be replaced every 18,000 miles under normal highway driving conditions (1.5 years based on the average miles driven per year of 12,000 miles) * Easy installation—K&N air filters come to you ready to drop into your factory air box, usually with no tools required
( 4 )
$20.99
$16.79
On Sale
When replacing the grille on your square body, you may need a new grille support due to rust or swapping to a different style. Brothers Trucks offers replacement grille supports for a wide range of Chevy and GMC vehicles from the 1970s, '80s, and '90s. They're constructed from thick, OE-gauge steel with an EDP coating to resist corrosion. The brackets are stamped from new tooling to deliver a precise fit and authentic appearance. Available for trucks with or without the inner hood release, these grille support brackets include factory mounting points for an easy installation. Order the model recommended for your application.
Not Yet Reviewed
$25.58
—
$32.00
$14.07
—
$17.60
On Sale
Mr. Gasket offers header/manifold exhaust gaskets which are fabricated from large-fiber gasket material bonded by a high-heat resistant compound. They are precision die-cut for each application, and provide excellent sealing and durability.
( 12 )
$34.72
$19.10
On Sale
The decades are generally not kind to the plastic covers found under the steering column, becoming brittle where one good smack can finish them off. Holley Classic Trucks steering column covers are ideal replacements to restore that area under your steering column. They are made with precise tooling for an excellent fit and finish, and they include all factory mounting points for an easy installation. Make your classic pickup truck look new again with products from Holley Classic Trucks. Choose the cover created for your truck.
Not Yet Reviewed
$23.01
—
$32.00
$12.66
—
$17.60
On Sale
The heart of a fuel system begins with the fuel tank. Secure your tank in place with Holley Sniper fuel tank straps. Available in many styles and shapes to fit a variety of applications, they are made from steel and galvanized for corrosion protection and continued good looks. Holley Sniper fuel tank straps provide a simple and inexpensive solution to alleviate fuel tank issues.
Not Yet Reviewed
$36.17
$19.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
