GMC V2500 | Summit Racing

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

TCI Super StreetFighter Transmissions

TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.

3.86 out of 5 stars ( 59 )

$2,085.95

Summit Bucks

Griffin Performance Fit Radiator Combos

Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.

4.01 out of 5 stars ( 240 )

$840.00

—

$997.00

Cold Case Performance Aluminum Radiator Modules

Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee

4.05 out of 5 stars ( 199 )

$690.54

Summit Racing™ Direct-Fit Dash Pads

Summit 1981-87 dash pads are made to OEM specifications, they are made with foam-backed vinyl, like the originals with a protective UV coating to help prevent ultraviolet damage. Designed from GM Blueprints and materials, to fit and look like the originals. Each dash pad features steel reinforced inserts and uses all factory mounting locations and hardware. No modifications are needed for installation in your truck. Select the color to match or complement your interior. These are considered Best Quality parts.

4.5 out of 5 stars ( 8 )

$593.99

VEGE Chevrolet 350 C.I.D. Remanufactured Long Block Crate Engines

If the time has come to replace your tired old small block Chevy, then look no further than a VEGE Chevrolet 350 c.i.d. remanufactured long block crate engine. These long blocks are an excellent foundation for budget-minded builds, are a drop-in replacement for many 1987-95 GM vehicles—and can also be retrofitted into nearly any vehicle. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines create great low-end power, making them perfect for cruisers, street rods, trucks and even your daily driver. They can produce 250 horsepower and 350 ft. lbs. torque when equipped with 600CFM carburetor and a dual plane 4-barrel intake manifold. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines feature: * Remanufactured 2-bolt main cast iron engine block * Cast crankshaft * Cast connecting rods * 12.3cc Dish hypereutectic pistons * 8.5:1 Compression ratio * Cast iron cylinder heads with 76cc combustion chambers * 1.94 in. Intake valves, 1.50 in. exhaust valves * Standard small Chevy exhaust bolt pattern * Uses standard 14mm x 1.25 thread, taper seat, 0.441 in. reach spark plugs * Hydraulic flat tappet camshaft * 0.383 in. Intake lift, 0.401 in. exhaust lift * Duration at 0.050 in. lift 194 int./202 exh. * 112 degree lobe separation * Oil pan with passenger side dipstick * Steel timing cover * Steel valve covers Drop-In replacement applications: * 1990-92 Cadillac Brougham * 1987-94 Chevrolet Blazer * 1988-95 Chevrolet C1500 * 1992-95 Chevrolet C1500 Suburban * 1988-95 Chevrolet C2500 * 1992-95 Chevrolet C2500 Suburban * 1988-95 Chevrolet C3500 * 1989-89 Chevrolet Caprice * 1987-95 Chevrolet G10 * 1987-95 Chevrolet G20 * 1988-95 Chevrolet K1500 * 1992-95 Chevrolet K1500 Suburban * 1988-95 Chevrolet K2500 * 1988-95 Chevrolet K3500 * 1987-89 Chevrolet P20 * 1988-95 Chevrolet P30 * 1987-87 Chevrolet R10 * 1987-88 Chevrolet R10 Suburban * 1989-91 Chevrolet R1500 Suburban * 1987-88 Chevrolet R20 * 1987-88 Chevrolet R20 Suburban * 1989-89 Chevrolet R2500 * 1989-91 Chevrolet R2500 Suburban * 1989-91 Chevrolet R3500 * 1995-95 Chevrolet Tahoe * 1987-87 Chevrolet V10 * 1987-88 Chevrolet V10 Suburban * 1989-91 Chevrolet V1500 Suburban * 1989-91 Chevrolet V2500 Suburban * 1989-91 Chevrolet V3500 * 1989-95 GMC C1500 * 1992-95 GMC C1500 Suburban * 1989-95 GMC C2500 * 1992-95 GMC C2500 Suburban * 1989-95 GMC C3500 * 1987-93 GMC G1500 * 1987-95 GMC G2500 * 1988-95 GMC G3500 * 1987-91 GMC Jimmy * 1988-95 GMC K1500 * 1992-95 GMC K1500 Suburban * 1988-95 GMC K2500 * 1988-95 GMC K3500 * 1988-89 GMC P2500 * 1989-95 GMC P3500 * 1987-87 GMC V1500 * 1987-91 GMC V1500 Suburban * 1987-87 GMC V2500 * 1987-91 GMC V2500 Suburban * 1987-91 GMC V3500 * 1993-95 GMC Yukon

3.72 out of 5 stars ( 25 )

$2,899.99

Summit Racing™ Metallic-Ceramic Coated Headers

They improve performance, keep heat contained, look fantastic, and have a sweet Summit Racing™ price--they're Summit Racing™ metallic-ceramic coated headers! These headers are meticulously crafted with high-quality steel tubing to remove exhaust gases with maximum efficiency and minimal power loss. Cyclical welds eliminate distortion, while heavy-duty 5/16 in. machined flanges eliminate leaks. Finishing these Summit Racing™ headers is a polished, metallic-ceramic thermal barrier coating, which not only extends service life by controlling underhood temperatures and fighting thermal fatigue and corrosion, but it also looks absolutely awesome! Factory header paint lasts a few minutes and just can't compare to the longevity of these Summit Racing™ metallic-ceramic coated headers. These headers are designed for off-road and racing use only, unless otherwise noted, and include gaskets, mounting hardware, and collectors. Gain performance and looks under the hood with Summit Racing™ metallic-ceramic coated headers.

4.2 out of 5 stars ( 439 )

$405.99

Cold Case Performance Aluminum Radiators

Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee

4.1 out of 5 stars ( 679 )

$816.54

Odyssey Drycell Batteries

Odyssey sealed rechargeable drycell batteries provide high engine-cranking pulses and are capable of 400 deep cycles. They can be installed on their sides or at any angle and have a 2-year storage life at 25 degrees C.

4.86 out of 5 stars ( 235 )

$429.99

TCI Heavy-Duty RV Transmissions

For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.

3.67 out of 5 stars ( 3 )

$2,349.95

ATK High Performance GM 350 TBI 290 HP Stage 1 Long Block Crate Engines

Give your truck a breath of fresh life with ATK High Performance GM 350 TBI 290 hp Stage 1 long block crate engines. These engines are designed to replace your old tired mill with a fresh unit that has a little bit more kick. These engines feature upgraded internals to help them pump out 290 hp and 370 ft.-lbs. of twist that will get your pickup or muscle truck moving. ATK GM 350 TBI 290 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.0 out of 5 stars ( 6 )

$3,034.99

Brothers Trucks One-Piece Door Windows

Brothers Trucks one-piece window kits for your classic Chevy/GMC truck eliminate the vent window, giving your truck a smooth appearance and great operation. The special cut glass provides complete sealing around the window, and is painstakingly designed for easy installation and use. Most kits will do both doors and are available with clear or tinted glass. Brothers offers power conversion kits complete with switches, as well as kits for manual and existing power window applications. Brothers Trucks one-piece window kits include glass, felt channels, glass scraper set, hardware, and any other parts that may be needed. Choose the kit designed for your truck.

1.9 out of 5 stars ( 10 )

$1,024.95

Summit Racing™ Sportvisor Cab Visors

Keep your cool, lose the glare, and look good doing it with one of these Summit Racing™ Sportvisor or lighted Sportvisor cab visors. Designed to fit the exact contours of your truck, their lightweight fiberglass body is finished with an easily painted white gelcoat. These truck sun visors come with self-tapping hex screws and easy-to-follow instructions. The lighted versions also include an easy-to-install wiring harness that can be completely hidden.

4.62 out of 5 stars ( 479 )

$311.99

—

$374.99

ATK High Performance GM 383 TBI Stroker 320 HP Stage 1 Long Block Crate Engines

Experience the torque that only a stroker can give you with ATK High Performance GM 383 TBI Stroker 320 hp long block crate engines. These engines crank out 320 hp and 395 ft.-lbs. of torque, perfect for your pulling rig, RV, or muscle truck. They are hand-assembled and precisely balanced to create smooth-running, reliable engines for your ride. ATK GM 383 TBI Stroker Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * Nodular steel crankshaft and 4340 I-beam connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .435 int./.462 exh. * Cam duration at 0.50- 198 int./210 exh. * 9.5:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

1.0 out of 5 stars ( 1 )

$3,998.99

OER Authorized Reproduction Bumpers

Guard your classic car or truck with the beautiful look of OER Authorized reproduction bumpers. These lustrous, high-quality, chrome plated steel bumpers duplicate the originals in most details. And, with the OER Authorized stamp, you know the fit will be right! Their replacement bumpers are equal or superior to the factory bumpers and are available in numerous models to fit your specific application. Give your GM muscle a polished, show-quality finish with the authentic appearance and original fit of OER Authorized reproduction bumpers.

4.17 out of 5 stars ( 109 )

$229.99

—

$245.99

TMI Pro-Series Bench Seat Brackets

TMI Pro-Series bench seat brackets are designed to fit TMI bench seats and are made specifically for each vehicle. These brackets are ideal for every automotive enthusiast looking to change up the interior seating on their current ride! Each bracket uses high-quality materials and will fit directly in place of your current seat mount location—No drilling or welding required!

3.38 out of 5 stars ( 16 )

$381.06

Stainless Works CNC Mandrel-Bent Exhaust Systems

Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible

3.87 out of 5 stars ( 31 )

$1,705.25

Summit Racing™ Classic OEM Radiators

Summit Racing™ classic OEM radiators are designed to give you top performance cooling, while fitting your vehicle's mounts, so your ride can have a new radiator without having to modify brackets and fittings. The radiators are available in various styles and sizes to best fit your application or engine bay design.

4.38 out of 5 stars ( 489 )

$516.99

Coverlay Manufacturing Interior Accessory Combo Kits

Interior accessory parts are notorious for flaking, cracking, and even getting very sticky. This makes the interior unpleasant to touch and look at. Coverlay Manufacturing has a solution for these problems. Coverlay Manufacturing interior accessories are made from durable ABS plastic, vacuum molded for a perfect fit, and will not get sticky or crack even in extreme temperatures. Each piece easily installs in minutes.

3.31 out of 5 stars ( 13 )

$563.99

—

$609.99

Brothers Trucks Premium Bumpers

Have the bumpers on your classic have seen better days? Whether it's damage caused by an accident or rust, Brothers Trucks has exactly what you need to make the front- or rear-end of that truck shine. These premium bumpers are fabricated via new tooling using thick, heavy-gauge steel for supreme strength; chrome plating gives them an OE-quality finish and corrosion protection. The bumpers also feature all factory mounting points for an easy installation. Nothing pulls your restoration together like high-quality premium bumpers from Brothers Trucks. Order the model designed to fit your vehicle.

4.46 out of 5 stars ( 13 )

$409.95

Auto Metal Direct Bumpers

Restore your classic's exterior appeal with Auto Metal Direct bumpers. They are made from heavy-gauge steel and are available with an OE-quality chrome finish or a custom primer (paintable) finish, allowing certain bumpers to be painted to match any desired color. All AMD bumpers feature, depending on application, correct holes for turn signals or back-up lamps, and installation is fast and easy, as they are designed as direct bolt-ons utilizing OE bumper brackets and hardware. All Auto Metal Direct bumpers are covered by a 5-year limited rust-through warranty.

4.45 out of 5 stars ( 357 )

$239.99

—

$315.99

Superlift Lift Leaf Springs

Superlift lift leaf springs feature a spring rate that is reduced as much as possible, to emphasize suspension travel and a more compliant ride. These leaf springs are designed for your specific application, to ensure the lift and tire clearance you're looking for.

4.5 out of 5 stars ( 66 )

$249.99

—

$279.99

Bed Wood and Parts Bed-In-A-Box Deluxe Kits

Bed Wood and Parts Bed-in-a-Box Deluxe kits include your unfinished wood choice, polished stainless steel bed strips, and matching hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box Deluxe kit designed to fit your application!

5.0 out of 5 stars ( 1 )

$1,445.00

—

$3,700.00

OER Authorized Reproduction Dash Pads

OER Authorized reproduction dash pads fit secure just as the original equipment. There is no better way to impress the judges than have a spec interior. Gain those extra points and dial-in in the look of your dash today!

3.83 out of 5 stars ( 242 )

$327.99

—

$480.99

GMC V2500 Parts and Accessories