GMC TRANSMODE Engines & Components

Sealed Power Connecting Rod Bearings

Sealed Power engine products are a complete system of application-engineered replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. Sealed Power connecting rod bearings are available with different linings to meet every engine's needs. They're made using either tri-metal or aluminum bi-metal construction for the utmost in performance and durability for all stock rebuilds and mild performance applications. Tri-metal alloys feature a steel base coated with a sintered layer of copper-lead alloy, followed by layers of electro-plated nickel and babbit to produce the ultimate bearings. Bi-metal aluminum types carry all of the same features without the babbit, as specified by many of today's top engine builders. Sealed Power bearings are available for a multitude of engines in sizes ranging from standard to 0.060 in. oversized.

4.13 out of 5 stars ( 8 )

$19.99

—

$119.99

Sealed Power Main Bearing Sets

Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.

4.44 out of 5 stars ( 100 )

$95.99

—

$204.99

Clevite P-Series Main Bearings

Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.

4.58 out of 5 stars ( 262 )

$129.99

—

$149.99

Clevite P-Series Rod Bearings

P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.

4.79 out of 5 stars ( 312 )

$12.99

—

$110.99

Edelbrock Performer-Plus Cam and Lifter Kits

Edelbrock Performer-Plus cam and lifter kits are designed for optimum torque from the low-end to the mid-range. They feature smooth idling cams for daily drivers, trucks, vans, RVs, and 4x4s. They offer improved throttle response and torque. Each kit includes a camshaft, hydraulic lifters, assembly lube, and instructions.

4.47 out of 5 stars ( 121 )

$396.95

Dorman Expansion Plugs

Dorman expansion plugs are conveniently designed aftermarket replacements for stripped plugs. A leak-proof fit and long service life are assured every time, due to high-quality standards and materials used in the manufacturing process. Dorman engine and camshaft expansion plugs are offered in multiple sizes, styles, and materials for precise fitment on countless makes and models. They're easy to install and available individually or in multi-pack sets.

4.59 out of 5 stars ( 76 )

$17.99

Clevite H-Series Rod Bearings

Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.

4.8 out of 5 stars ( 176 )

$16.99

Sealed Power Cam Bearings

Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.

4.17 out of 5 stars ( 120 )

$49.99

Melling Camshaft Bolt Lock Plates

Melling camshaft bolt lock plates prevent your camshaft bolts from loosening, helping you avoid costly valvetrain and engine damage. These kits are easily installed by applying torque to bolts properly and bending the locking tabs in place to secure the bolts. Melling camshaft bolts and lock plates are manufactured to stringent specifications using high-quality materials and manufacturing processes to ensure maintenance-free performance.

Not Yet Reviewed

$6.99

Dorman Oil Pan Drain Plugs

Do you have a rounded-off, stripped, or leaking drain plug? If so, then pick up one of these Dorman oil pan drain plugs. Designed and constructed to strict engineering quality standards, they are high-quality OE replacements coated for corrosion resistance and a long service life. Dorman's oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor, and money.

4.17 out of 5 stars ( 66 )

$3.99

—

$9.99

Dorman Valve Cover Grommets

Help deter those unwanted leaks with Dorman valve cover grommets. They're manufactured from oil-resistant rubber to be durable against severe heat and fluctuating temperatures under your hood. Plus, their beveled design ensures a secure, airtight seal. Choose the style and size designed for your vehicle application.

4.28 out of 5 stars ( 74 )

$2.99

—

$6.99

FAG USA Harmonic Balancer Repair Sleeves

FAG USA harmonic balancer repair sleeves are precision-engineered solutions designed to restore worn or grooved harmonic balancer sealing surfaces without the expense of replacing the entire balancer assembly. Available in a wide range of sizes and applications, these durable steel repair sleeves provide a smooth, concentric sealing surface that helps eliminate oil leaks, extend seal life, and maintain proper engine performance. Manufactured to strict quality standards, FAG repair sleeves offer a cost-effective, reliable repair for automotive, light-duty, and heavy-duty engine applications, ensuring accurate fit, long-lasting wear resistance, and dependable sealing performance in demanding operating conditions.

Not Yet Reviewed

$36.99

—

$41.99

Clevite H-Series Main Bearings

Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.

4.6 out of 5 stars ( 149 )

$165.99

—

$181.99

Hastings Premium Ductile Ring Sets

Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.

4.43 out of 5 stars ( 171 )

$37.99

—

$216.99

Enginetech Rod Bearings

Enginetech rod bearings are made of high-quality alloys, based on the application requirement. They are made on state of the art equipment, ensuring consistent bearing thickness for proper oil clearances, and parting line chamfers are precisely controlled, ensuring they are cut at the correct angle to allow for the proper amount of oil bleed-through without reducing oil pressure. The materials are high strength (load capacity), but also have good anti-friction properties (wear resistance, anti-seizure, and embeddability). Enginetech rod bearings provide extra protection and better durability within your rebuild. Select the size needed.

Not Yet Reviewed

$125.99