Availability
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 7 )
$5,128.95
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
Not Yet Reviewed
$5,011.95
Bed Wood and Parts Bed-in-a-Box standard kits include your unfinished wood choice, mild (paintable) steel bed strips, and zinc coated hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box standard kit designed to fit your application!
Not Yet Reviewed
$5,100.00
—
$9,267.50
Bed Wood and Parts Deluxe X kits include your wood choice, polished stainless steel bed strips with matching hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Deluxe X kit designed to fit your truck bed!
Not Yet Reviewed
$5,068.00
—
$10,502.50
Bed Wood and Parts Standard X kits include your wood choice, mild (paintable) steel bed strips with zinc coated hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Standard X kit designed to fit your truck bed!
Not Yet Reviewed
$5,045.00
—
$10,262.50
Bed Wood and Parts Bed-in-a-Box Deluxe kits include your unfinished wood choice, polished stainless steel bed strips, and matching hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box Deluxe kit designed to fit your application!
( 1 )
$5,032.00
—
$9,507.50
Your truck bed is the largest flat surface on the entire truck. Why treat it like the smallest? Utilizing only the highest grade of hardwoods available and the most advanced manufacturing technology, each plank in these drilled BedWood kits are precision milled with your truck in mind. They come predrilled for bed-to-frame mounting. The chamfered edges and proprietary groove, coupled with the ease of installation, results in a finished appearance putting you one step closer to the winners circle. Available in multiple finishes as well as unfinished. Bed strips and hardware sold separately. Choose the model best suited for your truck.
Not Yet Reviewed
$5,100.00
—
$6,995.00
Your truck bed is the largest flat surface on the entire truck. Why treat it like the smallest? Utilizing only the highest grade of hardwoods available and the most advanced manufacturing technology, each plank in these undrilled BedWood kits are precision milled with your truck in mind. They come undrilled, allowing you to drill your own holes for custom application or hidden mounting holes. The chamfered edges and proprietary groove, coupled with the ease of installation, results in a finished appearance putting you one step closer to the winners circle. Available in multiple finishes as well as unfinished. Bed strips and hardware sold separately. Choose the model best suited for your truck.
Not Yet Reviewed
$5,100.00
—
$6,995.00
Bed Wood RetroLiner systems offer enthusiasts who prefer an all-in-one kit a truly innovative product to deliver yesteryear's classic touch to your late model truck. RetroLiner wood bed liner systems provide American craftsmanship that will boost your truck's looks with beautiful wood only available through Bed Wood and Parts. The systems include your choice of nearly 40 exotic and popular wood species--all kiln-dried and stabilized, precut, properly milled, grooved, 4-stage finish sanded, and delivered ready to finish! Plus, you'll receive cut-to-length polished stainless steel or natural steel bed strips and mounting hardware, mounting pads, a frame, an installation tool, and comprehensive, easy-to-follow instructions. There's no drilling or cutting required and they install without damage to your factory steel bed! Whether you're restoring a pre-war classic, personalizing your truck from the musclecar era, or customizing a newer domestic or import model, you can trust your project to Bed Wood and Parts RetroLiners because, as they say, "Wood looks good!"
Not Yet Reviewed
$5,295.00
—
$10,157.50
SCE offers AccuSeal Pro oil pan gaskets for a wide range of vehicles from the 1950s and up. They are available in one or two-piece designs and are made with proprietary processes and materials like steel core laminate, rubber, silicone, PTFE coated, aluminum, and elastomer. The replacement gaskets are engineered to resist heat and seal surface irregularities. Plus, they have built-in crush limiters to prevent damage from over-tightening. For street or strip, order the AccuSeal Pro oil pan gasket recommended for your application.
( 9 )
$5,081.03
BluePrint Engines 50 state legal long blocks are designed and manufactured to factory specs for specified vehicles. They're built using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make them better than the original—while still meeting the description of a "replacement" engine. From Ford Windsors to Chevy big and small blocks, these assembled crate engines are available for a wide range of vehicles spanning a half-century. Select the recommended fitment, specifications, and options needed for your swap.
Not Yet Reviewed
$9,349.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
