Availability
Showing In Stock Items. Show All 30 Items.
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$125.15
—
$135.25
$112.64
—
$121.72
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$185.65
—
$192.55
$167.08
—
$173.30
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 353 )
$161.95
$121.95
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$223.85
$201.46
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 991 )
$237.95
$178.95
On Sale
There is nothing more personal in a car than a steering wheel, touching and interacting with it each time you drive. So, choose the best for your hands—Grant. Grant Billet T-Series steering wheels are great choices to garner the look and feel you want for your vehicle. Machined from a solid piece of billet aluminum for increased structural rigidity, the T-Series spokes are either polished or finished in black and the wheels are hand-wrapped in leather. The center of the horn buttons is available with different automotive manufacturer's logos. Choose the perfect match for your vehicle.
( 6 )
$250.99
$225.89
On Sale
There is nothing more personal in a car than a steering wheel, touching and interacting with it each time you drive. So, choose the best for your hands—Grant. Grant Billet Classic Series steering wheels are great choices to garner the look and feel you want for your vehicle. Machined from a solid piece of billet aluminum for increased structural rigidity, the Classic's spokes are either polished or finished in black and the wheels are hand-wrapped in leather. They are available with different automotive manufacturer's logos in the center of the horn button. Choose the perfect match for your vehicle.
( 6 )
$239.99
—
$310.99
$215.99
—
$279.89
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$190.95
$171.86
On Sale
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 157 )
$179.30
$161.37
On Sale
When restoring or repairing your classic square body truck, you may be dealing with a damaged or rusted out radiator support. Brothers Trucks offers the stock replacements you need. These radiator supports are stamped from heavy-gauge steel and include all the factory mounting points for an easy installation. They're EDP coated for corrosion protection. Order the radiator support designed to fit your Chevy or GMC truck.
( 1 )
$361.05
$234.95
On Sale
Whether you're looking to match interior hardware or give your ride a look of it's own, these Billet steering wheels from Grant are right up your alley. They're machined from a solid piece of aluminum with precise CNC equipment, for intricate details and unmatched quality and attention to detail. These wheels have leather or mahogany wood rims with machined aluminum finger grips. Each wheel has a machined and polished billet trim ring with a matching styling sleeve. They're available in a variety of spoke styles to match any interior.
( 33 )
$239.99
—
$310.99
$215.99
—
$279.89
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
Protect your ride from overheating! Now you can maximize cooling efficiency with Frostbite's performance cooling aluminum radiators. They're engineered to cool more effectively and weigh less than the older OEM-style brass units, enhancing the overall performance of your engine. Frostbite radiators are available in a variety of application-specific fitments, each unit engineered with aircraft-quality aluminum cores, fittings, tanks with billet aluminum filler necks, and OEM-style brass petcocks. A proper cooling system starts with the right radiator—the Frostbite!
( 318 )
$449.95
$247.95
On Sale
Agility Auto Parts offers a complete line of radiators covering most North American vehicle applications. These certified automotive condenser components meet or exceed the manufacturer's specifications, making them ready to install out of the box. Engineered and manufactured under ISO TS16949 quality system guidance, every Agility Auto Parts radiator is 100 percent leak-tested for trouble-free operation and utilize a B-tube design to optimize coolant flow through the radiator, while adding structural rigidity creating a durable tube. Plastic tanks are designed and tested to 100,000 pressure cycles with no cracks, bowing, or distortion. The tanks are cast with ribbing inside or out for added strength. Order the radiator model designed to fit your application.
( 32 )
$128.99
—
$299.99
$116.09
—
$269.99
On Sale
MSD 8.5 mm Race Tailored Super Conductor Wire Sets are designed to specifically fit race engines equipped with headers or MSD distributors. They feature wires that are custom cut to route behind the block, under the headers, and to the spark plugs. This routing gives the engine an extra clean appearance as well as protecting the wires from making contact with the engine. The wires have a special helically-wound core that has just 40-50 ohms of resistance per foot--but with the RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 feet of tightly wound copper for superior conductivity. A tough 8.5 mm synthetic/silicone jacket over an extra heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, stainless steel terminals feature snap locks to assure a secure fit.
( 13 )
$210.95
$116.95
On Sale
Frostbite electric water pumps are a must for high performance vehicles where horsepower comes at a premium. They eliminate common issues found in traditional mechanical water pumps--parasitic horsepower loss, heavy cast housings, and impeller drag. Frostbite electric aluminum water pumps are available in black and polished finishes with offerings for popular engine platforms. When it comes to keeping your cooling system performing at peak levels, make it Frostbite! Features include: * Available with cast or billet aluminum housings * Free-up lost horsepower resulting from the use of mechanical pumps * Frostbite logo laser-etched for performance look * Ford applications available with block-off plates * Kits come complete with gaskets, wiring pigtail, and mounting hardware
( 10 )
$315.95
—
$349.95
$173.95
—
$192.95
On Sale
Add some aluminum to your engine compartment with these Mr. Gasket diecast aluminum valve covers. They feature precision diecast aluminum construction for an exact fit. Their extended sealing lips positively locate and secure the gasket and prevent it from moving under pressure, eliminating oil leaks. The covers have a high-luster polished finish, and include a 1 1/4 in. breather hole, unless otherwise noted. They come in ball-milled or plain top models; the plain tops are a full .125 in. thick to enable custom milling or engraving.
( 2 )
$195.75
$107.95
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 30 )
$442.95
—
$448.95
$243.95
—
$246.95
On Sale
Designed for hot street/strip cars, COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic camshafts provide maximum top-end performance for your high performance car.
( 60 )
$291.95
$233.56
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$299.95
$164.95
On Sale
Maradyne Jetstreme electric fans feature a low-profile design to allow for turbo or supercharger installations. They use a sealed motor tested in accordance with DIN EN 60529 and are dust and waterproof to IP68. The fans utilize an S-blade design for quieter operation and have a rubber seal that eliminates vibration contact and increases airflow. Maradyne Jetstreme electric fans have all glass-filled nylon construction for maximum durability.
( 18 )
$218.58
—
$305.18
$196.72
—
$274.66
On Sale
Flowtech Afterburner headers have a patented velocity tube design, which will increase scavenging and smooth exhaust pulses. They also feature a primary collector formed from steel, and a large 3 in. secondary collector. They're available in standard painted or ceramic coated finishes. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 7 )
$409.95
$225.95
On Sale
Brothers Trucks floor mats are practical add-ons that look great and protect your vehicle's front flooring. Officially licensed by Chevrolet, each mat features the trademarked "GM" logo and is based on the nearly impossible to find originals. They also feature the original dimensions and detail for a factory look and feel. Brothers Trucks floor mats are made from extremely durable, easy-to-clean PVC rubber, backed with anti-slip spikes--providing protection for your carpet and insulating your interior from heat and road noise. The mats are available in a variety of colors. Order the pair designed to fit your vehicle.
( 20 )
$154.95
$100.95
On Sale
Brothers Trucks offers replacement fenders for a variety of applications, including many Chevy and GMC models from the 1940s, '50s, '60s, and '70s. If you're in the process of restoring or repairing your classic pickup, you may find yourself looking at a wrinkled or rusted out fender. Rather than costly and time-consuming body repair, why not replace it with a brand new premium fender from Brothers? These fenders are manufactured with high-quality tools, resulting in excellent looks and fitment. They're constructed with thick, OE-gauge steel and then EDP coated to provide high strength and corrosion protection. Product features: * Available separately for the left and right side * Includes all factory mounting points for an easy installation * Stamped from high quality tools for a precise fit and appearance
Not Yet Reviewed
$249.95
$137.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
