Availability
Showing In Stock Items. Show All 25 Items.
On Sale
Our Summit Performance® headers are manufactured from mandrel-bent tubing for superior flow and greater horsepower. The headers feature a pressure-formed collector for a better flow rate and a JIG-welded tube-to-flange plate for a perfect fit. They're made for off-road and racing use only. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. The headers are available in a wide range of styles, sizes, and configurations. Order the pair recommended for your application. (Special warning regarding Summit Racing™ painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)
( 1998 )
$186.99
—
$209.99
$168.29
—
$188.99
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 349 )
$161.95
$121.95
On Sale
When someone tells you they are just gonna "drop a new engine" into their vehicle, please know that there's a wee bit more involved. Without certain block brackets, for instance, that new engine will drop right down to the ground! Summit Racing™ strong GM to Cummins conversion engine mounts for your big motor swap. They are black powdercoated to resist the elements, and rugged enough to firmly support the heavier new Cummins powerplant. The proper mounts will also reduce vibration and extend the life of your engine's components and accessories. Order a pair today and let the transfer begin!
( 14 )
$244.99
$220.49
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 457 )
$178.95
—
$225.15
$129.95
—
$168.95
On Sale
A Summit Racing™ plastic/aluminum radiator gives your engine bay the current cooling update it needs. These units are designed for premium performance, while fitting your vehicle's original mounts, so your ride can have a new radiator without modifications to the brackets and fittings. The radiators are available in various sizes and styles to fit your application. Efficient and economical, Summit Racing™ replacement radiators are an excellent option to restore the cooling performance your vehicle requires.
( 80 )
$180.99
—
$269.99
$162.89
—
$242.99
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 149 )
$207.95
—
$289.95
$155.95
—
$217.95
On Sale
Pacer Performance Flexy Flares fender flares offer extra protection against the mud, dirt, gravel, and road debris that would otherwise be thrown into your fenders and doors. Flexy Flares are manufactured from heavy-duty EPDM synthetic rubber that is steel-reinforced. These durable bolt-on flares won't crack or peel in cold weather. They're available in numerous sizes for both universal and custom-fit applications.
( 50 )
$127.99
—
$277.99
$115.19
—
$250.19
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
Flowtech Afterburner headers have a patented velocity tube design, which will increase scavenging and smooth exhaust pulses. They also feature a primary collector formed from steel, and a large 3 in. secondary collector. They're available in standard painted or ceramic coated finishes. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 7 )
$409.95
$225.95
On Sale
Brothers Trucks instrument bezels provide an easy way to dress up or refresh the interior of your modern classic GM pickup truck or SUV. The brushed aluminum finish provides that 'deluxe' look and the self-adhesive backing makes installation a snap. Brighten up the inside of your classic ride with an assist from Brothers Trucks instrument bezels.
( 3 )
$201.95
$111.95
On Sale
Pacer Performance Hi-Five cab lights will give your ride some extra styling. Designed to match a variety of factory GM, Ford, and Dodge heavy-duty pickup cab roof lights, these bright illuminated cab roof lights are available with your choice of incandescent or low amperage draw LED bulbs. They give the "big rig" look to light-duty trucks and SUVs and provide a better visual fix for drivers in other vehicles. Available with amber, red, clear, or smoked lenses, their unique base design adapts and seals to flat or curved roof surfaces. The cab lights are offered in a variety of sizes—and include all necessary mounting hardware, wiring, and a manual switch.
( 140 )
$119.99
—
$128.99
$107.99
—
$116.09
On Sale
Protect your ride from overheating! Now you can maximize cooling efficiency with Frostbite's performance cooling aluminum radiators. They're engineered to cool more effectively and weigh less than the older OEM-style brass units, enhancing the overall performance of your engine. Frostbite radiators are available in a variety of application-specific fitments, each unit engineered with aircraft-quality aluminum cores, fittings, tanks with billet aluminum filler necks, and OEM-style brass petcocks. A proper cooling system starts with the right radiator—the Frostbite!
( 311 )
$449.95
$247.95
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 30 )
$442.95
—
$448.95
$243.95
—
$246.95
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$257.95
—
$262.95
$144.95
—
$167.95
On Sale
Frostbite electric water pumps are a must for high performance vehicles where horsepower comes at a premium. They eliminate common issues found in traditional mechanical water pumps--parasitic horsepower loss, heavy cast housings, and impeller drag. Frostbite electric aluminum water pumps are available in black and polished finishes with offerings for popular engine platforms. When it comes to keeping your cooling system performing at peak levels, make it Frostbite! Features include: * Available with cast or billet aluminum housings * Free-up lost horsepower resulting from the use of mechanical pumps * Frostbite logo laser-etched for performance look * Ford applications available with block-off plates * Kits come complete with gaskets, wiring pigtail, and mounting hardware
( 10 )
$315.95
—
$349.95
$173.95
—
$192.95
On Sale
MSD 8.5 mm Race Tailored Super Conductor Wire Sets are designed to specifically fit race engines equipped with headers or MSD distributors. They feature wires that are custom cut to route behind the block, under the headers, and to the spark plugs. This routing gives the engine an extra clean appearance as well as protecting the wires from making contact with the engine. The wires have a special helically-wound core that has just 40-50 ohms of resistance per foot--but with the RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 feet of tightly wound copper for superior conductivity. A tough 8.5 mm synthetic/silicone jacket over an extra heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, stainless steel terminals feature snap locks to assure a secure fit.
( 13 )
$210.95
$116.95
On Sale
ACCEL 8.8mm spiral wire sets are custom-tailored for true street/strip performance use. They feature oversize 8.8mm ultra performance wires and spark plug boots, double silicone construction with a fiberglass braid, and a spiral-wound steel core conductor. The sets are available with distributor terminal ends and spark plug boot end options for fitment on a variety of specific applications. If you're looking for excellent ignition performance for your street/strip ride, order the ACCEL 8.8mm spiral wire set designed for your vehicle.
( 5 )
$166.95
$108.95
On Sale
When renewing the interior of your classic truck, you may notice that many of the panel pieces have begun to deteriorate or crack over the years, including the door panels. These door panel replacements from Brothers Trucks are made with high-quality injection-molded ABS or OE-style cardboard using original patterns for a factory appearance. They are easy to install with stock mounting points to make installation and removal a breeze! Choose the Brothers Trucks door panel inserts designed to fit your vehicle.
( 8 )
$326.25
$212.95
On Sale
K&N washable lifetime performance air filters are designed to increase horsepower and acceleration while providing excellent filtration. K&N makes over 1,400 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable--and are custom-designed to fit into your existing factory air box. Their drop-in design means that adding performance is simple. With most vehicles, you simply remove the disposable air filter and replace it with one of these K&N air filters. Find the model designed for your specific vehicle application.
( 1135 )
$157.99
$126.39
On Sale
These lightweight flexplates by QuickTime are designed to significantly improve your engine acceleration and deceleration. They are constructed of quality HSLA 60 grade steel, zinc plated for corrosion protection, and are SFI 29.1 certified.
( 1 )
$199.95
$129.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$285.95
—
$299.95
$164.95
—
$185.95
On Sale
Add some aluminum to your engine compartment with these Mr. Gasket diecast aluminum valve covers. They feature precision diecast aluminum construction for an exact fit. Their extended sealing lips positively locate and secure the gasket and prevent it from moving under pressure, eliminating oil leaks. The covers have a high-luster polished finish, and include a 1 1/4 in. breather hole, unless otherwise noted. They come in ball-milled or plain top models; the plain tops are a full .125 in. thick to enable custom milling or engraving.
( 2 )
$195.75
$107.95
On Sale
Everyone has different needs for their truck. One of the most dramatic changes you can make to a vehicle are the rear ring and pinion gears. Whether you are going for aggressive low-end response for performance and towing, looking to make your truck a highway cruiser, or you've made a change to your wheel and tire size, Hurst ring and pinion sets are available to assist with the transformation. They offer gear sets ranging from 3.08 to 4.56 for the GM 12-bolt rear ends to get you exactly where you need to be. Hurst sets feature high-grade steel for strength and durability along with a gear tooth finish that reduces friction and heat for longevity.
Not Yet Reviewed
$332.95
$183.95
On Sale
Time can be rough on your axles, especially for a 4WD. Years of use and abuse can cause damage to the splines of bearing surfaces. Hurst Engineering axles are made from high-quality, heat-treated 1541H alloy for strength and durability. They offer 5-lug and 6-lug direct-fit axles to replace those in your C or K Series truck with an 8.875 12-bolt 30 spline axle and are 31 7/16 in. long. Choose the proper replacement axle for your truck, and trust Hurst Engineering for your truck axle needs. Key features: * Heat-treated, high-quality 1541H alloy for strength and durability * 30 Spline and 31 7/16 in. long for a direct replacement * Fits 8.875 in. GM truck 12-bolt * Available for 5 x 5 in. and 6 x 5.5 in. lug patterns
Not Yet Reviewed
$277.95
$152.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
