Availability
Showing In Stock Items. Show All 68 Items.
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 303 )
$556.95
—
$703.95
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$549.95
—
$799.95
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$545.95
—
$629.95
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$599.95
—
$749.95
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$529.95
—
$799.95
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 189 )
$549.95
Centerforce I clutch kits are designed to be high-quality, entry-level performance clutches for those in need of a superior stock replacement. Using the patented Centerforce centrifugal weights (where applicable) and premium friction materials, these Stage 1 clutch systems are perfect for applications with stock engines or mild power increases from minor bolt-on modifications.
( 31 )
$503.95
—
$577.95
Maximize your transmission's power potential! TCI sprag and drum assemblies are designed to reduce rotating mass without compromising drum integrity. They will hold up to five clutches and are hard coated for improved wear characteristics.
( 6 )
$517.95
—
$548.95
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 37 )
$749.95
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 5 )
$559.77
—
$841.39
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$564.95
—
$699.95
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 30 )
$573.95
ACDelco offers transmission bellhousings for a wide range of vehicles from the 1990s and up. Built from aluminum, these GM-recommended replacements deliver the quality and durability of original equipment, plus a factory fit and solid performance. The bellhousings are available for nearly two dozen transmission models. Order the unit designed for your application.
( 8 )
$616.99
ACDelco new torque converters are GM OE replacements that offer the same performance, durability, and service life you've come to expect. With quality steel housings and internal components, ACDelco torque converters are sure to deliver the performance and fit needed for your vehicle.
( 1 )
$550.99
—
$622.99
On Sale
Hays Street/Strip clutch kits are engineered and built as matched assemblies, using only top-quality new parts, to deliver maximum reliability and durability, as well as long-term dependability. They're available in both diaphragm and Borg & Beck styles, with sprung-hub clutch discs that have organic linings. Applications are available to fit a variety of cars and trucks aimed at street or street-and-strip use. These kits come complete with a pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). A pilot bushing is not included.
( 9 )
$599.95
—
$749.95
B&M Transkits give you the same high-quality components that are used in all B&M Street and Strip transmissions. They include high performance friction materials, a complete overhaul gasket set, a drain plug kit, and all of the parts necessary to convert your valve body into a full manual/automatic valve body. These improvements enhance shift feel, while retaining full automatic features. The Transkits come complete with full instructions on how to assemble your transmission to B&M specifications (except BMM-70232 and BMM-70233). They also include special directions on how to modify your case, pump, and components.
( 44 )
$649.95
On Sale
Hays Street 450 clutch conversion kits are an excellent upgrade offering up to 30 percent more holding power (clamping force) over your stock clutch. They're designed for handling stock to mildly modified engines—up to 450 horsepower. If drivability along with a stock pedal feel are the leading factors for your application, then order the Hays Street 450 clutch conversion kit recommended for your specific vehicle and engine size. Features, items, and specs: * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded damper springs * Pressure plate * Clutch disc * Throwout bearing * Alignment tool * Instructions
( 8 )
$549.95
—
$570.95
ATS Diesel Performance flexplates are SFI-approved, meaning that they stand up to the most demanding race application standards. These one-piece units are constructed of strong billet steel, allowing you to shift harder and faster without damage. A great deal of pressure is placed on your flexplate when racing. These ATS parts are able to endure the high-performance situations to increase horsepower to your wheels.
Not Yet Reviewed
$785.00
Hays Classic clutch kits are the original Hays clutch! These conversion kits are the newest 26-spline version in the Hays clutch lineup, and are designed to work in conjunction with a modern 5-speed or 6-speed transmission swap. They feature an organic disc with an upgraded pressure plate for increased holding power over stock. They're designed for stock cars and trucks, or ones with minor performance bolt-ons, such as headers, intake, and exhaust. For clutch kits that are street-friendly, smooth, and reliable, consider the Hays Classic line of clutches—they're a great choice for your favorite muscle car, Jeep, or truck! Order the kit recommended for your vehicle application. Hays Classic conversion clutch kit features: * Includes 26-spline clutch disc for use with most 5-speed and 6-speed conversions * Steel back clutch disc features heavy-duty hub spring assembly for increased load capacity * Great drivability for power levels up to 400 hp * Clutch kit is painted signature Hays Classic orange color * Smooth, chatter-free operation using top quality organic composite friction surface material * Upgraded pressure plate gives you increased holding capacity over a stock clutch * Clutch kits come complete with pressure plate, disc, release bearing, and alignment tool (unless otherwise noted)
( 1 )
$515.95
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 369 )
$522.95
—
$573.95
Dorman transmission control modules have been thoroughly tested to offer the same function and performance as the stock component, electronically controlling the vehicle's automatic shifting for far less than replacements at the dealer.
( 2 )
$515.99
—
$588.99
Skip the clunky old mechanical linkage and install American Powertrain Hydramax hydraulic clutch release systems. They easily install in almost any rear-drive vehicle. The patent-pending adjustable master cylinder bracket allows you to mimic any original clutch rod angle, giving you a smooth, modern clutch feel without hacking up your firewall. The systems are designed to work with original and aftermarket pedals and are available for most vintage 4-speeds, along with TREMEC T5, TKO, Richmond, T56, and Magnum 6-speed transmissions. These systems come with the nickel plated firewall mount, volume-matched master cylinder, as well as a reservoir kit, lines, fittings, model-specific pedal mounting hardware, and model specific internal or external slave cylinder.
( 79 )
$725.00
—
$735.00
Centerforce DFX is their competition-proven clutch packages for select import and domestic applications. DFX Series clutches are engineered to meet competition standards of quality and craftsmanship and are aimed at high-end applications that continually demand increased integrity and holding capacity. These clutch kits score big--not only with their holding capacity and strength, but also with their race-inspired drivability. They retain an easy pedal effort, thanks to Centerforce's patented ball-bearing actuated diaphragm, for smooth engagements without detriment to the vehicle's release components. Centerforce DFX performance clutch kits utilize nodular iron pressure plate rings and reinforcements designed to help prevent drive strap breakage and safety. The DFX Series clutch kits allow end users to tailor their driving performance and style with different choices of clutches and clutch discs, from street/strip to full-on drag racing capabilities.
( 5 )
$556.95
—
$629.95
Hays classic clutch kits are great replacements for original equipment units. They're available for all three major clutch types, diaphragm, Borg & Beck, and Long, and feature clutch discs with sprung hubs and organic linings. There are applications for a huge range of domestic vehicles, including pony cars, muscle cars, classics, and pickups. Kits come complete with pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). Pilot bushing not included.
( 11 )
$749.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
