Availability
Put down the hammer and step away from your engine! Summit Racing™ has a better, easier way to put a harmonic balancer on your engine—one of these GM LS installation tools. These simple-to-use quality tools provide you with a hassle-free option to complete the setup. They're available in different styles for a variety of applications. Having the right tools for the job can make your life easier. Order the Summit Racing™ harmonic balancer installation tool that best suits your needs.
( 166 )
$51.99
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$241.99
OTC harmonic balancer pullers are designed for removing damper pulleys in tight engine compartments without removing the radiator. This OTC kit includes a 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8 in. square drive for ratchet use, and a 3/4 in. hex for wrench or socket use.
( 74 )
$94.99
—
$119.99
Spanner wrenches are a must-have tool for adjusting your coilover shock absorbers. RideTech's wrenches grip the retainer under the spring to spin it and adjust the coil spring up or down. By loosening the small bolt holding the collar, you can turn it with the wrench; no need to unbolt the top of the shock. Correct adjustment of the coil spring preload is a critical step toward improved suspension and handling. RideTech machined spanner wrenches can be used manually or as an attachment on your 3/8 in. ratchet.
( 16 )
$20.00
OTC glow plug bore reamers are specialty tools for select engines. They will ream bores for proper replacement of glow plugs—or, heating elements that warm incoming fuel and air to encourage efficient fuel combustion in a diesel engine. Order the reamer recommended for your engine application.
( 1 )
$177.99
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 53 )
$49.00
Performance Tool keeps it simple. Their harmonic balancer puller kits give you what you need to easily remove harmonic balancers from a variety of engines. They are made from quality alloy steels and include an assortment of bolts. Additionally, their design helps prevent damage to the pulley and shaft. Regardless of your vehicle type or budget, Performance Tools has the perfect harmonic balancer puller for you.
( 49 )
$64.99
If you need to replace OEM control arm bushings and don't have a press, make RideTech control arm bushing removal and installation tools your solution. These tools are made from top-quality materials and aid in the removal of stock upper and lower control arm bushings and the installation of RideTech Delrin bushings--with just simple hand tools.
( 57 )
$80.00
—
$135.00
On Sale
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$75.65
$68.05
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
Put down that sledge hammer and pick up one of these Hotchkis GM upper trailing arm bushing installation and removal tools. They allow for the easy removal and installation of the new GM 10 and 12-bolt rear-end bushings commonly found in GM A-body vehicles. Say goodbye to the days of pounding on your freshly powdercoated axle with a sledge hammer--life just got a little easier for you, thanks to Hotchkis!
( 40 )
$99.99
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 1 )
$10.99
—
$181.99
Innova OBD1 kits offer compatibility with all their OBD2 code readers featuring removable cables in both the CarScan and FixAssist lines of tools. With these sets, you can perform tests like KOEO, KOER, timing check, cylinder balance, output state, wiggle, and more. As a leading supplier of test equipment and diagnostic reporting for the automotive aftermarket, Innova Electronic Corporation offers high-quality products, innovative diagnostics, and value to their customers with products like their OBD1 kits. OBD1 adapters included with the kit: * General Motors (1982-93 and some 1994-95 models) * Ford, Lincoln, Mercury (1983-95 models with EEC-IV systems) * Toyota, Lexus (1991-95) * Chrysler, Dodge, Plymouth (1984-95) * Jeep (1993-95) * Honda
( 4 )
$104.99
On Sale
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$62.95
$56.65
—
$56.69
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$13.99
—
$22.99
Connect your scan tool to your vehicle using Innova scan tool and code reader connection cables. They are available for the most popular computer types and simply plug-in your scan or code reader tool.
( 9 )
$19.99
Performance Tool door spring tools are designed to install door hinge springs the right way. Installation and removal is made easy by simply attaching one of the door spring tools to your spring, grabbing a open end or ratcheting box wrench, and adjusting the nut to compress or expand the spring.
( 29 )
$10.99
Don't crack, break, or scratch your glass during removal. These OER window guide roller nut tools are designed to easily remove the guideplate nut on the door or quarter window glass.
( 8 )
$21.79
Safely unload torsion bar keys for replacement or adjustment with Performance Tool torsion bar unloading tools. These premium tools feature a larger C-frame opening to accommodate beefier torsion bars and are engineered to handle GM's K-3500 series trucks with heavy-duty chassis and larger torsion bars. The torsion bar unloading tools are manufactured from heavy-duty forged steel with larger 7/8 in. diameter threaded screws.
( 20 )
$45.99
Since 1986, Precision Replacement Parts has been a trusted name in the Automotive Glass Industry and offers a comprehensive line of quality products including glass setting tape for the vent glass in the assemblies. This special tape is the material that's designed to hold your side glass into the bottom channels or chrome window frames, depending on how your car or truck came from the factory. Select the tape designed for your application.
( 12 )
$12.99
—
$14.99
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$106.99
OTC fuel tank lock ring wrenches are a universal design that allows tools to fit fuel tank lock rings on a range of vehicles. Used with a drive ratchet or breaker bar, they easily remove and install a lock ring on your fuel tank when servicing the fuel pump or fuel sending unit.
( 12 )
$91.99
Lisle Duramax flexplate holder and socket kits are designed to lock flexplates in place when removing the harmonic balancer on 6.6L Chevrolet Duramax diesel engines with an Allison automatic transmission. They save time by locking the flexplate at the transmission instead of having to remove the starter for water pump replacement. Simply remove the metal spring-loaded inspection plate on the bottom of the transmission, and slide the tool into the opening toward the engine--with the top of the tool engaging the teeth of the flywheel. Use the included 36mm 12-point socket with 3/4 in. square drive to remove the harmonic balancer bolt and retorque upon installation.
( 24 )
$34.99
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
