Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
GMC Tools & Shop Equipment
Showing In Stock Items. Show All 122 Items.
Not Showing Customizable Items. View Customizable Items.
OTC Harmonic Balancer Pullers
OTC harmonic balancer pullers are designed for removing damper pulleys in tight engine compartments without removing the radiator. This OTC kit includes a 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8 in. square drive for ratchet use, and a 3/4 in. hex for wrench or socket use.
( 75 )
$149.99
—
$152.99
Melling Prelube Engine Oiler Tank Kits
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 7 )
$223.99
Melling Engine Priming Tools
Melling engine priming tools are specialty tools that help prevent galling. Manufactured from the highest quality materials available, Melling engine priming tools circulate oil through critical areas of your new engine before engine startup.
( 46 )
$55.99
RAM Clutch Billet Steel Alignment Tools
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 62 )
$49.00
Mr. Gasket Rear Main Seal Installation Tools
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$80.65
MotoRad Cooling System Pressure Tester Adapters
Checking your cooling system and radiator cap is easy with MotoRad testers and tester accessories. MotoRad's adapters work with their radiator testers to enable you to hook up and test different types of radiators. Choose the one(s) that best fit your testing needs.
( 2 )
$11.99
—
$195.99
Hotchkis Sport Suspension GM Upper Trailing Arm Bushing Tools
Put down that sledge hammer and pick up one of these Hotchkis GM upper trailing arm bushing installation and removal tools. They allow for the easy removal and installation of the new GM 10 and 12-bolt rear-end bushings commonly found in GM A-body vehicles. Say goodbye to the days of pounding on your freshly powdercoated axle with a sledge hammer--life just got a little easier for you, thanks to Hotchkis!
( 45 )
$99.99
Mr. Gasket LS Timing Cover Alignment Tools
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$60.49
—
$67.15
OTC Glow Plug Bore Reamers
OTC glow plug bore reamers are specialty tools for select engines. They will ream bores for proper replacement of glow plugs—or, heating elements that warm incoming fuel and air to encourage efficient fuel combustion in a diesel engine. Order the reamer recommended for your engine application.
( 1 )
$178.99
TransGo Valve Body Reamer and Guide Tool Kits
Designed for durability, engineered for performance, TransGo valve body reamer and guide tool kits afford users quick and easy installation of TransGo's SHIFT KIT valve body kits and components. These universal tool kits feature a high-speed steel reamer and three guides, specifically made to work with five top-selling repair kits. Instructions are located within the corresponding repair kit and clearly indicate which valves and locations to ream, simplifying the installation process.
( 1 )
$111.49
Performance Tool Torsion Bar Unloading Tools
Safely unload torsion bar keys for replacement or adjustment with Performance Tool torsion bar unloading tools. These premium tools feature a larger C-frame opening to accommodate beefier torsion bars and are engineered to handle GM's K-3500 series trucks with heavy-duty chassis and larger torsion bars. The torsion bar unloading tools are manufactured from heavy-duty forged steel with larger 7/8 in. diameter threaded screws.
( 20 )
$42.99
Lisle Duramax Flexplate Holder and Socket Kits
Lisle Duramax flexplate holder and socket kits are designed to lock flexplates in place when removing the harmonic balancer on 6.6L Chevrolet Duramax diesel engines with an Allison automatic transmission. They save time by locking the flexplate at the transmission instead of having to remove the starter for water pump replacement. Simply remove the metal spring-loaded inspection plate on the bottom of the transmission, and slide the tool into the opening toward the engine--with the top of the tool engaging the teeth of the flywheel. Use the included 36mm 12-point socket with 3/4 in. square drive to remove the harmonic balancer bolt and retorque upon installation.
( 25 )
$39.99
Innova Scan Tool and Code Reader Connection Cables
Connect your scan tool to your vehicle using Innova scan tool and code reader connection cables. They are available for the most popular computer types and simply plug-in your scan or code reader tool.
( 12 )
$19.99
OER Window Guide Roller Nut Tools
Don't crack, break, or scratch your glass during removal. These OER window guide roller nut tools are designed to easily remove the guideplate nut on the door or quarter window glass.
( 9 )
$21.79
Precision Replacement Parts Glass Setting Tape
Since 1986, Precision Replacement Parts has been a trusted name in the Automotive Glass Industry and offers a comprehensive line of quality products including glass setting tape for the vent glass in the assemblies. This special tape is the material that's designed to hold your side glass into the bottom channels or chrome window frames, depending on how your car or truck came from the factory. Select the tape designed for your application.
( 13 )
$10.99
—
$13.99
Performance Tool Spindle Nut Wrenches
These Performance Tool spindle nuts wrenches make quick work of stubborn spindle nuts. These wrenches feature chromoly steel and black oxide sockets that fit most 2WD and 4WD light truck applications.
( 58 )
$15.99
—
$24.99
Performance Tool Harmonic Balancer Pullers
Performance Tool keeps it simple. Their harmonic balancer puller kits give you what you need to easily remove harmonic balancers from a variety of engines. They are made from quality alloy steels and include an assortment of bolts. Additionally, their design helps prevent damage to the pulley and shaft. Regardless of your vehicle type or budget, Performance Tools has the perfect harmonic balancer puller for you.
( 52 )
$44.99
Performance Tool Door Spring Tools
Performance Tool door spring tools are designed to install door hinge springs the right way. Installation and removal is made easy by simply attaching one of the door spring tools to your spring, grabbing a open end or ratcheting box wrench, and adjusting the nut to compress or expand the spring.
( 35 )
$9.99
TransGo Oversized S4 Regulator Valve Reamers
TransGo oversized S4 regulator valve reamers are specialized, high-quality steel tools designed to re-size the S4 regulator valve bore in 2018-and-later GM 8L45 and 8L90 transmissions. They're used in conjunction with the oversized S4 valve kit to correct wear-related shift issues, clunks, and hydraulic leaks without replacing the valve body. Additional details: * Reams the worn valve body bore to accommodate the oversized hardened steel S4 regulator valve, restoring proper hydraulic seal * Specifically for 2018+ GM 8L45 and 8L90 transmissions featuring the 2-land S4 valve design * Fixes 1-2 or 1-3 harsh/slipping shifts, and clunking on coast-downshifts * The tool includes a guide to ensure proper alignment and is reusable, reducing the need for expensive, dedicated machine fixtures
Not Yet Reviewed
$141.71
McGard Spline Drive Lug Nut Sockets
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 27 )
$13.99
—
$24.99
COMP Cams Crankshaft Sockets
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 205 )
$70.95
OER Ignition Switch Bezel Nut Tools
OER ignition switch bezel nut tools allow you to remove or install a bezel nut without damage. OER ignition switch bezel nut tools are specifically designed to interlock with the three recessed dimples on the outside edge of the bezel nut, avoiding any contact that can damage your chrome. These nifty little tools are great to have on hand for your restoration!
( 3 )
$18.99
OEM Automotive Tools Fuel Tank Lock Ring Tools
OEM Automotive Tools fuel tank lock ring tools are a universal design that allows them to fit fuel tank lock rings on the many vehicles listed in the applications. Used with a drive ratchet or breaker bar, they enable you to easily remove and install a lock ring on your fuel tank when servicing the fuel pump or fuel sending unit.
Not Yet Reviewed
$40.99
MotoRad Cooling System Pressure Testers
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$131.99
