Ford Car & Truck Parts and Accessories

BluePrint Engines Ford 302 C.I.D. 361 HP Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.

4.55 out of 5 stars ( 11 )

$6,899.00

—

$10,599.00

ATK High Performance Ford 302 300 HP Stage 2 Long Block Crate Engines

Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 2 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate

5.0 out of 5 stars ( 4 )

$4,210.99

BluePrint Engines Ford 408 C.I.D. 450 HP Stroker Base Crate Engines

BluePrint Engines offers Ford 408 c.i.d. 450 hp Stroker base crate engines—with or without carburetor, distributor, and intake manifold. Here are the basic features and specs: * Horsepower and torque: 450 hp / 470 lbs.-ft. * Compression ratio: 10.0:1 * Hydraulic roller cam * New cast steel crankshaft * Forged pistons * Forged I-beam 6.200 in. connecting rods * Brand new Blueprint engine block * Square and parallel decked * Line honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * 4-bolt main * 4.000 in. bored * One-piece rear main seal * Mech fuel pump provision: Yes * 4.000 in. stroke * External 28 oz. balance front and rear -- CYLINDER HEADS: * Aluminum cylinder heads * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 90cc intake/65cc exhaust runners -- CAM SPECS: * Roller * .579 Intake / .579 Exhaust * 236 Intake / 248 Exhaust duration @ .050 - 114 degree lobe separation -- IGNITION TIMING: * 34 degrees total at 3500 rpm -- ALSO INCLUDES: * Oil pan, dipstick, timing cover and valve covers * Dyno tested and shipped with results * Some models also include carburetor, distributor, and intake manifold

5.0 out of 5 stars ( 1 )

$8,099.00

—

$9,099.00

BluePrint Engines 302 C.I.D. Cruiser Base Crate Engines

BluePrint Engines 302 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 16 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * Cast iron crankshaft * 3.00 in. stroke * OEM 5.090 in. connecting rods * Hypereutectic pistons * 50oz external engine balance Cylinder heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial with 32-34 degrees total Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine

Not Yet Reviewed

$6,299.00

BluePrint Engines Ford 347 C.I.D. 415 HP Base Stroker Long Block Crate Engines

Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp base stroker long block crate engines. They are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * 10 to 1 compression * Valve covers * Painted oil pan * Brass freeze plugs

2.0 out of 5 stars ( 4 )

$7,499.00

BluePrint Engines Ford 347 C.I.D. 415 HP Dressed Stroker Long Block Crate Engines

Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp dressed stroker long block crate engines are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * New BluePrint cast iron block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast steel crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * Dual plane, satin aluminum intake manifold * Carburetor * Distributor * Valve covers * Painted oil pan

4.5 out of 5 stars ( 8 )

$8,199.00

—

$10,799.00

Ford Performance Parts 5.0L Coyote Gen 4X Crate Engines

Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern

Not Yet Reviewed

$11,704.99

ATK High Performance Ford 302 Stock Drop-In Long Block Crate Engines

Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.

3.94 out of 5 stars ( 32 )

$3,998.99

On Sale

Holley Terminator X Engine Management Systems

Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)

4.48 out of 5 stars ( 96 )

$1,949.95

$1,348.95

—

$3,019.95

Ford Performance Parts 2024 7.3L Super Duty Long Block Crate Engine

Ford Performance Parts 7.3L V8 Ford gasoline crate engine from the 2024 F250 Super Duty is loaded with great features for your build. Features: * 7.3L displacement * Bore 107.2mm x stroke 101.0mm * 430 hp at 5,500 rpm * 485 lb.-ft. of torque at 4,000 rpm * 10.5:1 compression * Cast iron block * Aluminum cylinder heads * Intake valve diameter 55.13mm * Exhaust valve diameter 42.53mm * Lift (intake/exhaust) 13.67mm/15.26mm * Cam-in-block OHV design with variable cam timing * Forged steel crankshaft * Cast aluminum pistons * Port fuel injection * Firing order: 1-5-4-8-6-3-7-2 Each engine assembly includes: * Composite intake manifold * 87mm throttle body * Left and right exhaust manifolds * 8-qt. aluminum oil pan/cooler * Ignition coils and wires * Production flexplate * Factory lift brackets * M-6038-73 shipping and storage cradle * Bellhousing bolt pattern same as 4.6/5.4 and 5.0 Coyote * Engine weight: 580 lbs.

Not Yet Reviewed

$8,749.99

BluePrint Engines Ford 302 C.I.D. Bronco Edition 365 HP Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. Bronco Edition 365 hp long block crate engines are available with a carbureted or fuel injected system. The base dressed engines are loaded with impressive features: DESCRIPTION: * Horsepower and torque: 365 hp / 365 lbs.-ft. * Compression ratio: 9.5:1 * Aluminum heads * Hydraulic roller cam * Cast steel crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-piece rear main seal ROTATING ASSEMBLY: * Cast steel crankshaft * 3.000 in. stroke * OEM type 5.090 in. connecting rods * Hypereutectic pistons * 50 oz. external balance CYLINDER HEADS: * BluePrint aluminum cylinder heads - HP9009 * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners CAM SPECS: * Cam type: Roller * .533 Intake / .544 Exhaust * 215 Intake / 220 Exhaust duration * @ .050 - 114 degree lobe separation IGNITION TIMING: * 10-16 degrees initial, 32-34 total ALSO INCLUDES: * Bronco script valve covers * Harmonic balancer * Dual plane satin aluminum intake manifold * 600 cfm carburetor (model BP302MAXCTC) …. Or …. EFI system (model BP302MAXCTF) * Distributor * Painted oil pan NOTES: * Painted Ford Blue * Recommended break in oil for your BluePrint crate engine: BPP710 * Not for EGR * Engine timing cover is designed for standard rotation water pump ONLY * Valve cover breather not included. BluePrint Engines recommends PN B6AZ-6766-B * On EFI model: Holley Sniper EFI is NOT compatible with AOD trans. It does NOT have AOD kickdown lever.

Not Yet Reviewed

$7,799.00

—

$8,899.00

Ford Performance Parts 5.2L Gen 3 Coyote Aluminum Engine Blocks

Ford Performance Parts 5.2L Gen 3 Coyote aluminum engine blocks are upgraded versions of the Gen 1 and Gen 2 blocks (M-6010-M52 and M-6010-M52A). They feature higher flow oil squirters to provide added piston cooling and improved crankcase windage. All features are finish-machined, including head deck and crank bore. Get revved up for the improved high performance casting of Ford Performance 5.2L Gen 3 Coyote aluminum engine blocks and their ability to support higher horsepower engine builds! Features, items, and specs: * 94.0mm bore * Rod bolt path is clearance-machined in crankcase of block * Utilizes longer (187mm) cylinder headbolts to provide greater clamping force (requires longer headbolt kit: M-6067-M501280 or M-6067-M52B head changing kit) * Water jacket below cylinder bore updated to add more material for strength * Intake side of bore at deck surface includes cast-in brace (improves strength of cylinder wall and head gasket sealing) * Block features plasma-transferred wire arc spray weld liner coating (improved durability and heat transfer, reduced friction, and weight savings compared to previous Mustang GT aluminum blocks) * Cylinder liner coating doesn't require unique piston rings or piston material * Cylinder bores finish-honed and ready to assemble * Cross-bolted nodular iron main bearing caps—uses 12mm cylinder head bolts * Block has provisions for piston oil squirters (included) * Plugs and dowels

5.0 out of 5 stars ( 1 )

$2,494.99

Ford Performance Parts 2024 Gen 4 5.0L 480 HP Coyote Long Block Crate Engines

Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY

5.0 out of 5 stars ( 1 )

$11,051.99

—

$11,701.99

Holley Terminator X MAX Engine Control Modules

Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant

4.29 out of 5 stars ( 7 )

$1,229.95

ATK High Performance Ford 302 300 HP Stage 1 Long Block Crate Engines

Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 1 long block crate engines and give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 1 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

4.33 out of 5 stars ( 12 )

$3,639.99

BluePrint Engines Ford 302 C.I.D. 365 HP Base Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 365 hp base dressed long block crate engines are a fantastic swap option. Here are the specifications: -- 365 hp / 365 lbs.-ft. torque -- Compression ratio: 9.5:1 -- Aluminum heads -- Hydraulic roller cam -- Cast steel crank -- Hypereutectic pistons * BLOCK: New BluePrint cast iron block 4-bolt main 4.000 in. bore 1-piece rear main seal * ROTATING ASSEMBLY: Cast steel crankshaft 3.000 in. stroke OEM-type 5.090 in. connecting rods Hypereutectic pistons 50 oz. external balance * CYLINDER HEADS: BluePrint aluminum cylinder heads 60cc chamber 2.02 in. intake/1.60 in. exhaust valves 190cc intake/60cc exhaust runners * CAM SPECS: Cam Type: Roller .533 Intake / .544 Exhaust 215 Intake / 220 Exhaust duration @ .050 - 114-degree lobe separation * IGNITION TIMING: 10-16 degrees initial, 32-34 total * ALSO INCLUDES: Bronco Script valve covers Harmonic Balancer * NOTES: -- Painted Ford Blue -- Recommended break-in oil for your BluePrint crate engine: BPP710 -- Not for EGR -- Engine timing cover is designed for standard rotation water pump ONLY -- Valve cover breather not included. BluePrint Engines recommends PN B6AZ-6766-B or similar

Not Yet Reviewed

$7,199.00

Ford Performance Parts 5.0L Coyote Power Module with 10-Speed Automatic Transmission Combo Kits

Ford Performance presents the next generation 5.0L power all-in-one complete powertrain kit! The crew at Ford Performance spec'd out these kits to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Mustang GT 460 hp 5.0L Coyote V8 with a state-of-the-art 10-speed automatic transmission, along with all the electronics and hardware to finish the installation. The engine features advances like direct and port fuel injection, twin independent variable camshaft timing, along with a lightweight plasma transferred wire arc spray aluminum engine block. The Coyote power module simplifies both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play to simplify the conversion to a modern electronically fuel injected V8 high performance engine. Build the Coyote project of your dreams with high-quality aftermarket parts by Ford Performance!

Not Yet Reviewed

$19,555.99

Summit Racing™ Braided Stainless Engine Dipsticks

Summit Racing™ offers braided stainless engine dipsticks for a wide range of vehicles, from the 1950s and up. These slim replacements are designed with an easy-to-read flexible inner dipstick to accurately measure engine oil levels. They have a billet aluminum handle and are easy to mount. Order the model recommended for your vehicle.

4.25 out of 5 stars ( 65 )

$84.99

—

$86.99

Ford Performance Parts Boss 302 Engine Blocks

The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.

5.0 out of 5 stars ( 3 )

$2,249.99

Ford Performance Parts 363 C.I.D. 500 HP Boss Long Block Crate Engines

Ford Performance Parts has taken their popular 302 based stroker engines and built them into these Ford Performance Parts 363 c.i.d. 500 hp Boss long block crate engines. They accomplished this by maxing out 347 stroker engine blocks with a 4.125 in. bore, giving you 363 cubic inches of Ford power! Ford engineers designed these Z363 engines to work both on the street and the strip with a strong torque curve that delivers over 390 lbs.-ft. of torque from 3,500 to the 6,500 rpm redline. Additional technical specifications: * 500 hp at 6,500 rpm * 450 ft.-lbs. at 5,300 rpm * Boss 302 block with 8.200 in. deck height * 4.125 in. bore x 3.400 in. stroke * Forged steel crankshaft * Forged steel I-beam connecting rods * 10.1:1 compression ratio * Forged pistons with floating wrist pins, * Hydraulic roller camshaft and lifters * Valve lift (in.): 0.580 intake/0.602 exhaust * Duration at .050 in. of lift: 232 intake/240 exhaust * Ford Performance Parts aluminum Z2 cylinder heads * Exhaust port raised 5/8 in.; may require custom headers * 2.05 in. intake and 1.60 in. exhaust valves * Roller rocker arms with 1.65 ratio * Ford Performance Parts cast aluminum valve covers; fit most non-EFI applications * SFI-approved harmonic balancer; may require spacer for pulley alignment * 7-quart high performance oil pan with windage tray and scraper * Available with front or rear sump oil pan and pickup * Aluminum high performance water pump * Internally balanced; use neutral balance flywheel (sold separately) * Ignition timing recommended, 32 degrees BTDC at 4,000 rpm * Maximum recommended rpm: 6,500 * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed; allows use of mechanical fuel pump * Intake manifold not included * Includes intake gaskets and pilot bearing * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor sold separately * Steel distributor gear required * Shipping weight approximately 500 lbs. * Engine power rating based on long tube headers, Edelbrock intake manifold Super Victor with 750 Holley carburetor and 1 in. spacer * Built with currently available parts; photo and specifications may vary

5.0 out of 5 stars ( 1 )

$12,868.99

Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines

Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds

Not Yet Reviewed

$15,262.99

BluePrint Engines Ford 302 C.I.D. 361 HP EFI Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 361 HP EFI dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes: * Front sump oil pan * Valve covers * Timing cover * EFI * Standard rotation water pump * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine

Not Yet Reviewed

$7,999.00

—

$10,499.00

Holley Terminator X Engine Control Modules

Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant

Not Yet Reviewed

$870.95

Ford Performance Parts 5.0L Gen 3 Aluminator Short Block Crate Engines

Ford Performance Parts 5.0L Gen 3 Aluminator short block crate engines are hand assembled using quality high-performance internal parts. Offered in two compression ratios, they serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application and needs. Ford Performance engineers have taken care of the toughest part of building a new engine by designing a strong and durable short block that offers a wide range of power possibilities. Additional features and specifications: * 5.0L (302 cu. in.) * Precision internal balanced * Available in 12.0:1 or 9.5:1 compression ratio * Forged steel crankshaft * Mahle hard anodized forged pistons with Grafal low-friction coating * Manley H-beam connecting rods with ARP2000 bolts * 2018+ (Gen 3) production block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength * Accepts Gen 1, 2, 3 or GT350 cylinder heads with corresponding generation head gasket * Assembled and ready for Coyote heads, cams, timing set, and oil system

Not Yet Reviewed

$5,947.99

—

$7,149.99