Availability
Showing In Stock Items. Show All 633 Items.
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$849.95
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 2 )
$869.99
Trans-Dapt Performance Swap-In-A-Box complete engine swap kits feature everything you need to transplant that new engine into your ride. They include a set of application-specific headers (painted or ceramic coated), motor and transmission mounts, and some kits contain oil filtration components. By matching up these parts by vehicle, Trans-Dapt ensures a swap with minimal modifications needed for installation. Give your ride a heart transplant using one of these turnkey Swap-In-A-Box complete engine swap kits!
( 55 )
$956.99
Clearance
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 24 )
$782.99
If you're rebuilding the top-end of your engine, you'll want one of these Mahle Original head gasket sets. They are perfect for stock rebuilds of engines for street-driven cars and trucks. Mahle Original head gasket sets are packaged in shrink-wrapped trays, giving you the ability to view the contents prior to opening the package. You receive every part you need to complete your gasket repair in one package (unless otherwise stated). Mahle Original utilizes OE equivalent or better materials in all their head sets, providing you with Mahle's Best Solution for your sealing needs. Mahle Original head gasket sets give you original equipment form, fit, and function, so they fit just like the originals. These gasket sets are not intended for race applications.
( 30 )
$957.99
BD Diesel variable vane exhaust brakes keep you in control of your rig and its load! BD VVB technology takes advantage of your Chevy Duramax's turbocharger exhaust turbine to create up to 35 psi of backpressure/130 retarding horsepower. This gives you ample braking force to help you safely maintain your speeds on descents and curves, also giving you better control. So, the Garrett variable vane turbo designed to reduce turbo lag and increase power also helps to slow you down! BD's variable vane brake rotary switch electronically controls the vanes in the turbo and offers automatic moderate and aggressive downshifting programs for the Allison transmission, as well as working in Allison manual shift selections. The VVBs will integrate with your cruise control and the installation is easy. Hook your Duramax up with the new era of exhaust brakes--variable vane exhaust brakes from BD Diesel.
( 3 )
$816.95
Cometic Gasket Street Pro top-end gasket kits bring race-proven MLS technology to the budget-minded hot rod guy or gal. The multi-layer steel gasket is their commitment to cutting-edge technology and producing superior-quality gaskets. Street Pro gasket kits are constructed from multiple layers of stainless steel for its strength, along with excellent rebound and corrosion-resistant characteristics. The outer layers are coated with a rubber-based material to create a superior, heat-resistant seal that can withstand extreme cylinder pressures. Cometic gaskets are ideal for everything from aluminum heads to cast iron or aluminum blocks. Street Pro gaskets offer top-end quality that you can afford.
( 7 )
$846.36
On Sale
The 6-Mod Ignition Controller was originally developed for the 4.6 and 5.4-liter modular motors that were fed through a carburetor rather than an electronic fuel injection system. However, with the useful options that the 6-Mod provides, such as two rev limits, a step retard and easy control over the timing, the EFI people wanted a way to take advantage of the adjustment. The harness kit provides a splice-free installation of the MSD 6-Mod Controller to factory equipped EFI vehicles making installation a snap. All of the connectors plug directly to the factory units so there is no cutting or splicing of your factory wires. Once installed, the 6-Mod allows users to advance or retard the factory's timing curve, program a step retard for use with nitrous systems or even map out a timing curve through a laptop by using MSD's Pro-Data+ software.
( 4 )
$899.95
$808.95
On Sale
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$949.95
—
$999.95
$853.95
—
$898.95
Camburg Engineering tubular uniball upper control arms offer unmatched strength and resistance to the rigorous demands of off-road driving. Along with robust construction, they significantly enhance suspension geometry and wheel travel, resulting in improved control and responsiveness. Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger uniball bearing, these kits improve wheel travel and durability under extreme conditions. They can also augment the vehicle's alignment, driving characteristics, and handling. The arms are designed using CAD/CAM engineering software and manufactured in-house with precision welding and CNC machining. They are powdercoated steel gray for added durability, and include the necessary hardware for installation. Select the Camburg tubular uniball upper control arms designed for your truck and eliminate restrictive factory ball joints.
Not Yet Reviewed
$999.00
—
$1,099.00
Chassis Engineering bolt-on IFS mounting kits eliminate bump steer and other unpleasant surprises, resulting in a safe and enjoyable ride. These custom-made, fully bolt-on crossmember kits are based on the Pinto-Mustang II independent front suspension system and will provide the best method available to get the correct height geometry. They will lower your car about 2 to 4 in. when compared to stock. Plus, with the adjustable upper coil spring pods, there is about 2 1/2 in. of additional adjustment possible to further fine-tune your setup. Chassis Engineering bolt-on IFS mounting kits features include: * Exclusive adjustment system * Interlocking design * Superior strength * Easy and accurate installation
( 4 )
$1,012.00
The FAST valve timing control module (and associated harness) for Ford 5.0 Coyote engines provides a plug-and-play interface between the engine, FAST XFI Sportsman and an XIM ignition module. FAST valve timing control modules allow the ECU to control the position of Coyote engines' four phaseable camshafts. The intake and exhaust cam positions are separately tunable through C-Com software with tables for position vs. RPM and load. This provides a simple alternative to having to open up the engine to install mechanical locking devices on all four cams when switching to FAST aftermarket fuel injection. Since this VTC module is an electronic solution, the cams don't have to be fixed in a single position. The cams can still be moved to maintain the broad powerband allowed by the phaseable cam system. The VTC module allows for full, dynamic control of valve overlap, allowing the tuner to get their desired sound at idle, while still maintaining great off-idle torque and drivability. It won the runner-up position in the "Best New Performance – Street Product" category at the 2016 SEMA Show.
Not Yet Reviewed
$856.95
Scat forged standard weight crankshafts are designed for street or race engines with substantially increased horsepower. These crankshafts are precision-ground, heat-treated, shot-peened, inspected, and micro-polished for superior tolerance control. Scat crankshafts are also nitride-hardened for superior wear resistance, have straight-shot and chamfered oil holes, and feature lightening holes in all rod throws. They also have a large radius on all journals for improved strength and wear resistance. Scat forged standard weight crankshafts are available in dozens of sizes and configurations for fitment on vehicles spanning seven decades.
( 25 )
$851.99
—
$1,028.99
Are you building big power? Help pull the power within your engine out with Scat Ultra Q-Lite connecting rods. These rods are light, strong, and delivered ready to install. Crafted from high-tensile 4340 forged steel, Ultra Q-Lites use special 1.4 in. ARP 7/16 in. bolts to ensure clearance--no machining or indexing is required! These connecting rods are built with doweled caps for precision alignment and are also available with a profiled clearance for stroker applications. A Formula 1 style lightening hole reduces weight even more without compromising strength. You're not settling for the original horsepower in your engine, so don't settle for just any connecting rod; choose high-quality craftsmanship--Scat Ultra Q-Lite connecting rods.
( 3 )
$785.99
—
$847.99
These H-beam connecting rods are the strongest Scat connecting rods available. These Scat H-beam connecting rods are perfect for supercharged and nitrous applications. These rods incorporate a special doweled cap for specific cap-to-rod alignment and are profiled with extra clearance for stroker applications.
( 42 )
$757.99
—
$939.99
Tilton Sport 5.5 clutch assemblies are a direct replacement, and upgrade, for the QM V-Drive clutch. These value-packed Sport 5.5 clutch assemblies are designed and manufactured using proprietary materials and manufacturing processes that increases service life of the clutch internals. Featuring a rigid clutch cover that resists deflection, with hardened steel thrust buttons installed into the legs, these Tilton Sport 5.5 clutch assemblies provide the most durability and highest performing clutch for your money—bar none.
Not Yet Reviewed
$918.00
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$1,022.50
—
$1,119.50
$920.25
—
$1,007.55
If you plan on adding performance to your street machine or building a serious racer, Harland Sharp Original Series roller rockers are recommended for you. Using the very latest manufacturing technology and only the very finest materials, the Original Series rockers incorporate race-proven enhancements, such as improved strength, performance, and lighter weight over conventional rocker arm designs. Don't settle for any old rocker arm--go with a true leader in roller rocker arm technology--Harland Sharp.
( 175 )
$999.99
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 47 )
$814.99
Get more for your dollar with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits. You'll get more lift and power for less money with these street performance grinds. They're perfect for those wanting to upgrade to hydraulic roller cams. Howards manufactures their cams using the highest grade race-quality cores and precision-grinds their cams to provide the quality and performance that you want at a reasonable price. They've matched these hydraulic cams with a perfect set of their premium lifters. Overhaul your valvetrain for mild to wild street performance with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits.
( 69 )
$1,044.99
—
$1,059.99
Trick Flow® Track Max® hydraulic roller camshafts for Ford 4.6L/5.4L 2V modular engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 2 )
$974.99
PRW Platinum Series shaft-mount rocker arm systems fulfill the needs of successful racers and performance engine builders at every level. The Performance Quotient PQx rocker arms are made from quality alloy extrusions. These systems include CNC-machined billet steel pedestals, and ground, steel alloy rocker shafts—along with PRW SCM-4135 alloy steel fasteners, studs, and bolts. PRW Platinum Series shaft-mount rocker complete kits include all the components and hardware required for a professional installation. Order the system recommended for your specific vehicle and engine size. Features, items, and specs: * Several systems to suit many cam profiles * 8 pairs of shaft-mount rockers with adjustable cup-style valve lash adjusters * SAE 42100 full complement precision needle and cage roller bearings * Rated up to 750 lbs. open spring pressure * Internal oiling system for long-lasting performance
( 10 )
$779.24
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 83 )
$755.99
—
$836.99
Manley steel H-beam connecting rods are made from forged 4340 steel alloy. They're packed full of performance features, such as a compact uniform-grain structure for ultimate strength, full machining, stress relieving, and magnafluxing. The wrist pin and big end bores are honed to a +/-.0002 in. tolerance, and the wrist pins get a bronze alloy bushing. These units include cap screw ARP 8740 alloy rod bolts, and each rod set is weight-matched to within 2 grams. Available individually or in a set, order the model recommended for your vehicle year/make and engine application.
( 8 )
$777.00
—
$913.14
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
