Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
15 Results Found For "Engine"
The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI Wiring Harnesses
The Detail Zone puts you in control of your Ford wiring job with their Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses. Your 4.6 or 5.4 V8 Modular-powered ride will run like factory with these TDZ fully functional, closed-loop, fully scannable wiring systems. Installation starts with the Telorvek panels--your centrally located link between your engine sensors and computer. Detail Zone supplies all of the correct and necessary connections, terminals, and 20 ft. of fire-resistant wire--no predetermined wire lengths! Not only will you have plenty of length, but all wires are printed with sensor and terminal information, so there's no guessing which is which or where it goes! You'll have no more long hours spent tracing circuits, cutting, or soldering. The Telorvek panel is capable of being used as a breakout box required for diagnostic procedures to take voltage readings of different circuits. Take control of your project for a guess-free install and a trouble-free start-up with The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses.
( 3 )
$1,131.85
—
$1,283.75
Dorman Remanufactured Powertrain Control Modules
Dorman's remanufactured powertrain control modules offer original equipment performance for less than the cost of a new ECM from the dealer. The engine control module processes inputs from various sensors to control the engine's ignition and fueling for optimum performance and efficiency. Each ECM is quality-remanufactured and has been fully tested to ensure durability and functionality, including hot and cold chamber testing to meet original equipment performance. Order the module for your application.
( 4 )
$1,153.99
FTI Performance SRL-3 Series Billet Triple Clutch Torque Converters
FTI Performance SRL-3 Series billet triple clutch torque converters are designed for engines with some serious power! They're engineered to be locked up under full throttle and can withstand some abuse. The billet lockup piston, triple bearings, and anti-ballooning impeller hub are designed to get the job done. These converters are available in different stall torque ratios and stall ratings to match your engine and transmission combination.
( 7 )
$1,429.00
The Detail Zone Telorvek Ford 5.0 EFI Wiring Harnesses
The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses are for 5.0s. Are you tired of tracing circuits, cutting, and soldering? TDZ Telorvek fuel injection wiring systems provide all that you need, plus plenty of wire and instructions for a neat and professional looking job. Detail Zone systems supply you with the necessary Ford connectors with fire-resistant, printed wire--20 ft. for each sensor! And since they're printed with sensor and terminal information, there's no guessing or hours spent trying to figure out where they go! Simply plug them into the sensors, cut them to length, attach the terminals, and connect them to Telorvek panel, which then connects to the ECM. Complete closed loop systems allow your engine to run like the factory units. Diagnostic scan tool connections and MIL circuits are included, and you can also use the panel as a breakout box to take the voltage readings of different circuits. Free yourself from exhausting hours of checking for the right wires--wire your ride with The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses.
( 1 )
$1,131.85
RevMax Stage 4 Billet Triple Disc Torque Converters
RevMax Stage 4 billet triple disc torque converters are designed for those who have heavily modified engines or for those that tow heavy weights. The newest designs incorporate custom-tuned lockup clutch dampers. These dampers soften the application of the lockup clutches while still resisting shudder. This softer apply is much gentler on the input shaft then traditional triple disc converters. These converters work best when paired with their diesel performance valve bodies. All Revmax Stage 4 converters are rated for approximately 700 to 750 horsepower and a maximum 1,500 ft-lbs. of torque. Give your ride the powertrain it deserves with an assist from the RevMax Stage 4 billet triple disc torque converter best suited for your application. More product features, items, and specifications include: * Billet front cover * Triple-disc, high-performance lockup clutch system * Custom-tuned clutch damper assembly * Exclusive custom stator designs and upgraded sprag retainer * Upgraded lockup clutch material and high-performance seals * Upgraded stator billet bearing cap and dual-sided Torrington bearing stator design * 4130 chromoly flanged impeller hub * Lowered internal clearance for maximum fluid coupling * 4340 hardened turbine hub and splines * Furnace-brazed impeller and TIG-welded brazed turbine * Torrington high-performance stator and turbine bearings * Computerized robotic sealing welds followed by fully pressurized leak testing * Precision internal clearances set to increase efficiency and improve performance * Rust-resistant high-quality paint * TCRS machine computerized high-speed balancing to less than 5 grams * Runout tolerances of less than 0.005 in.
Not Yet Reviewed
$1,045.00
ATI Treemaster Torque Converters
ATI Treemaster torque converters use all-new internal components that are designed to optimize efficiency and durability for each piece. They are computer-mated to your combination to take full advantage of your engine's torque curve. Specific stator designs are used to achieve free speed when up against the converter, and instant lockup when using a brake. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
( 2 )
$1,263.99
The Detail Zone Telorvek Ford 5.0 Coyote EFI Wiring Harnesses
The Detail Zone Telorvek Ford 5.0 Coyote EFI wiring harnesses make wiring your project easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and will support manual and 6R80 automatic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.
Not Yet Reviewed
$1,283.75
—
$1,309.95
Banks Power Ford 1997-2005 6.8L V-10 Class A Motorhome PowerPack Systems
Is your motorhome "shift-happy"? If so, Banks PowerPack systems can give your Ford 6.8L V-10 Class A coach a whole new attitude! With a swift kick of performance, Banks PowerPacks optimize your engine's airflow for increased power, prolonged engine life, and better mileage. The systems include proven bolt-on power adjusters like: Ram Air with a Super Scoop; stainless heat-shielded 5-tube TorqueTube exhaust manifolds—with a patented PowerPickle pulse converter; a low-restriction Dynaflow muffler; and a Monster exhaust with a tailpipe and tip. An OttoMind engine calibration module may be included, depending on the application. All of these components pack the power for all speeds under all conditions with plenty of torque when you need it the most. Plus, they can raise your average mpg by 7.4 percent! You can end the shift-happy behavior of your Ford V-10 motorhome with a Banks Power PowerPack system.
Not Yet Reviewed
$1,497.00
Banks Power Ford 2000-2003 7.3L Powerstroke Git-Kits
Banks Power Ford 2000-2003 7.3L Powerstroke Git-Kits will amplify your truck's performance at a budget-friendly price. The kits produce rear-wheel gains up to +50 hp, +88 lbs.-ft. torque—and save you an average of 8 percent in fuel when you're toting something heavy behind you. These exhaust systems maintain safe EGTs to preserve engine durability. Additional details: * Git-Kit Bundle, power efficiency system with single exit exhaust, black tip for use with 2000-03 Ford 7.3L Excurson * Optimizes airflow, air density, continuous power and MPG * Honors the host vehicle and improves longevity * Dissipates mid-range exhaust drone * Increased fuel economy when towing Includes: * Monster turbine outlet pipe * Monster exhaust system * Black tailpipe * Heatshield * Banks Power Urocal * Includes all necessary hardware
Not Yet Reviewed
$1,159.00
ATI Treemaster MRT Torque Converters
Quick, consistent reaction times are essential to winning races, and there's nothing better suited to the task than highly efficient ATI Treemaster MRT (Minimum Reaction Time) torque converters. They are computer-mated to your combination to take full advantage of your engine's torque curve. Specific stator designs are used to achieve free speed when up against the converter, and instant lockup when using a brake. A specification sheet must be filled out prior to ordering. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$1,263.99
The Detail Zone Telorvek Ford 3.5 Ecoboost EFI Wiring Harnesses
Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek Ford 3.5 Ecoboost EFI wiring harnesses come with all the sensor connections pre-installed on color-coded and printed wire which attaches to the engine and transmission using the factory ECM. These harnesses support manual and 6R80 automatic transmissions and come with detailed instructions as well as tech support. Please note: In 1996, Ford began installing Passive Anti-Theft Systems (PATS) in their ECMs. Short of installing all the components and sensors from the donor vehicle, the only way to defeat PATS is through an ECM reprogramming (sold separately).
Not Yet Reviewed
$1,283.75
TCI 6R80 Bolt-Together Torque Converters
TCI Automotive offers 6R80 bolt-together torque converters for a variety of automatic transmission street/strip applications. They're available in single-disc and triple-disc lock-up assemblies, as well as four different stall speed rating RPM ranges. These high-stall torque converters feature woven-carbon friction and lock-up control technology which seamlessly applies the clutch. Each one features a removable billet front that allows access to the entire lock-up assembly, turbine, stator and bearings for servicing or re-stalling in the event of future vehicle modifications. The billet front is CNC-machined and made from pre-hardened steel. For added strength, TCI engineers included a pre-hardened billet turbine hub, lock-up piston and 50-spline clutch hub. The converters are fully furnace-brazed, computer-balanced and hand-assembled to precise tolerances. Select the options preferred for your vehicle.
Not Yet Reviewed
$1,444.95
Banks Power Ford 1994-97 7.3L Powerstroke Stinger Systems
Banks Power Ford 1994-97 7.3L Powerstroke Stinger systems will strengthen your truck's muscle with impressive gains in horsepower and torque. Banks designed these kits to provide you with more hauling muscle. They're manufactured from quality materials to ensure performance and durability. Systems include: * Ram Air filter and service kit * Ottomind engine calibration module with Stinger calibration * 3.50 in. Monster tailpipe * 4.00 in. polished stainless steel exhaust tip * Transcommand transmission management for automatic transmissions * Dynafact pyrometer * Boost gauge assembly
Not Yet Reviewed
$1,299.00
FTI Performance SRL Series Billet Lockup Torque Converters
FTI Performance SRL Series billet lockup torque converters feature a computer-designed, CNC-machined billet front cover and a billet lockup piston--making premature clutch wear a thing of the past. With custom stator designs and multiple blade angle pumps, stalls are available from 2,800-4,400 rpm. They are custom-built to your exact needs and driving style. With furnace-brazed and heli-welded fins, severe-duty sprague, and anti-ballooning flanged impeller hub, these torque converters are virtually indestructible.
( 18 )
$1,099.00
Banks Power Ford 1999-2006 6.8L Stinger Systems
Banks Power Ford 1999-2006 6.8L Stinger systems will strengthen your truck's muscle and durability with impressive gains in horsepower and torque. They're manufactured from quality materials to ensure performance, durability, and more hauling muscle. Kits include the following components: * Ram Air intake with air filter housing * 3.50 in. stainless steel Dynaflow muffler and a tailpipe * 4.00 in. polished stainless steel tailpipe tip
Not Yet Reviewed
$1,149.00
