FORD STREET ROD | Summit Racing

On Sale

Patriot Full-Length Headers

Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing

4.08 out of 5 stars ( 164 )

$313.68

—

$783.50

$282.31

—

$705.15

Summit Racing™ Block Hugger Headers

These Summit Racing™ block hugger headers will help you to save space and give you the performance that you want. They feature clean welds and precision flanges for accurate and tight seals. The headers come with bolts, gaskets, and reducers. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.4 out of 5 stars ( 169 )

$319.99

—

$389.99

Top Street Performance Triangulated 4-Link Rear-End Suspension Kits

Top Street Performance's popular triangulated 4-link rear-end suspension kits are designed to work with a 3 in. axle tube and have 3-position shock mounts to make it easy to set the desired ride height. They mount the forward brackets to the inside of your frame and eliminate the need of a panhard bar. The link bars are fully adjustable 1 in. diameter by 0.156 in. wall tubing with 3/4 in. rod ends and nylon bushings. They're available with steel or stainless steel tube material. These all-in-one kits are a simple solution for great looks and handling. Order the model recommended for your vehicle.

4.83 out of 5 stars ( 6 )

$283.96

—

$370.38

Cold Case Performance Aluminum Radiators

Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee

4.07 out of 5 stars ( 757 )

$394.99

—

$483.54

On Sale

Patriot Clippster Headers

Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing

4.25 out of 5 stars ( 286 )

$538.04

—

$768.99

$484.24

—

$692.09

Pete and Jake's California Kid Front Nerf Bumpers

Pete and Jake's California Kid front nerf bumpers are a duplicate of the original on The California Kid. These chrome bumpers are a great add-on to your custom street rod. The unique decorative bumpers are available in a variety of styles for use on numerous vintage 1930s and '40s cars.

4.5 out of 5 stars ( 4 )

$494.99

United Pacific Fenders

Let United Pacific fenders assist in restoring your antique or classic. They are stamped exactly as the originals and finished with either a black EDP protective coating or in weldable primer. United Pacific fenders are available for right and left, front and rear with original mounting details, tail lamp hole, or gas filler neck hole.

4.79 out of 5 stars ( 14 )

$628.82

On Sale

Patriot Tight Tuck Headers

Patriot Tight Tuck headers provide the solution to many problems associated with engine swaps in modern street rods. They fit in the tightest of engine compartments, and they clear most stock motor mounts. Many Tight Tucks are manufactured from durable 16-gauge tubing and come complete with gaskets, header bolts, and collector reducers. Besides their popular finishes, Patriot also offers a chrome option that is polished before and after assembly for show-quality appearance, as well as a stainless steel option. Order the model designed for your vehicle and engine application. Patriot Tight Tuck finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.24 out of 5 stars ( 49 )

$343.99

—

$676.42

$309.59

—

$608.78

Bob Drake Fuel Tanks

Bob Drake offers fuel tanks for a wide range of Ford vehicles. These steel replacements are available in a variety of sizes and configurations for fitment on specific cars and trucks. Order the model recommended for your application.

5.0 out of 5 stars ( 2 )

$424.99

Hedman Traditional Block Hugger Headers

Hedman traditional block hugger headers feature a design that is ideal for factory manifold replacements or engine swap projects that do not have a header designed specifically for that application. Hedman block huggers have an extremely low profile, only Hedman Tight Tubes headers offer more clearance. They are offered in mild steel and stainless steel either coated or uncoated to meet your performance and budgetary needs. The HTC and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.

4.17 out of 5 stars ( 63 )

$264.99

—

$408.99

United Pacific Trunk Support Arms

If the trunk support arms on your vintage hot rod have seen better days, then United Pacific has what you need! These factory-style replacements are made from durable stainless steel to resist corrosion—and then polished to a bright mirror finish. Restore the function and appearance of your deck lid supports, with an assist from United Pacific. Order the model designed for your vehicle application.

4.0 out of 5 stars ( 1 )

$49.99

Heidts Street Rod Parallel 4-Link Kits

Heidts street rod parallel 4-link kits are probably the simplest to install and a good choice for several applications. These kits are easy enough for the casual car guy to install, with the link frame mount being one piece instead of two. The 4-link kits use 1 in. x .156 tube bars with 3/4 in. stainless adjusters and urethane bushings. They include chassis mounting brackets, multi-position coilover axle brackets, and hardware. Keep your rear axle in its proper place more easily with Heidts street rod parallel 4-link kits.

Not Yet Reviewed

$772.00

Helix King Pins

Helix spindle king pins are replacement front-end suspension parts used to connect steering knuckles to original solid or aftermarket I-beam axles on vintage Ford vehicles (1928-48) and custom hot rods. * Application: Designed for 1928-48 Ford front axles and aftermarket I-beam setups * Components: Includes precision-ground steel king pins, top-quality bushings, locks, and hardware * Function: Restores proper steering geometry, replaces worn parts, and eliminates play or vibration in the front wheels * Vintage stock ride height * Must be installed so it points out sideways instead of down. The shorter ear for the king pin goes to the top * For 1/2-20 in. x 1.25 button head cap screws

Not Yet Reviewed

$39.99

Sanderson Headers Blockhugger Headers

You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.

4.36 out of 5 stars ( 332 )

$713.70

—

$760.99

On Sale

Flowtech Headers

Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.

4.09 out of 5 stars ( 1003 )

$92.99

$83.69

Johnson's Radiator Works Performance Radiators

"The cooling is in the copper." Johnson's Radiator Works performance radiators feature a 4-row, 2 3/4 in. thick, high-flow copper core, ideal for the best cooling efficiency possible. They are made with heavy-gauge steel side brackets and mounting holes pre-stamped where needed. Antique, vintage, or classic, Johnson's has a radiator guaranteed to cool your vehicle and engine setup. Additional features: * Copper core with one-piece brass tanks * Brass tubes made in-house--125 in. x 0.5 in. * Top tanks stamped from .040 deep draw brass * Quality control start to finish from raw material to finished product * Made with original tooling, equipment, and techniques from Walker * Designed to operate with a 15 to 18 lb. radiator cap (except Flathead application 7 lb. cap recommended) * Brass drain cock

5.0 out of 5 stars ( 4 )

$1,375.00

—

$1,760.00

Cold Case Performance Aluminum Radiator Modules

Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee

4.06 out of 5 stars ( 227 )

$599.99

United Pacific Trunk Lid Hinges

United Pacific offers a wide range of replacement parts for vintage vehicles, including these trunk lid hinges for 1928-32 Ford Coupes and Roadsters (except 3W). Each kit includes steel mounting blocks, trunk pivot pins, and stainless steel 1/4 in.-20 mounting screws.

Not Yet Reviewed

$19.99

Tanks Inc. Spreader Bars

Tanks Inc. spreader bars are premium-quality stainless steel upgrades designed specifically for 1932 Ford street rods and hot rods, delivering both structural support and timeless styling. Available in front and rear configurations, these spreader bars are offered in a high-luster polished or brushed stainless steel finishes, with select models featuring integrated high-visibility LED lighting for turn, parking, and brake signal functions. Built to match original dimensions while enhancing durability and appearance, Tanks Inc. spreader bars provide a clean, custom look that complements any restoration or performance build. The necessary mounting hardware is included with spreader bars for a straightforward frame bolt-on installation.

Not Yet Reviewed

$56.99

—

$88.99

On Sale

Patriot Lakester Weld-Up Kits

Patriot's Lakester weld-up header kits work great for street rodders and racers who need to build custom headers when a specific fit header is not available for their car. Check out these Lakester-style header kits featuring 16-gauge mild steel tubing and specially designed tapered collector cones. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.75 out of 5 stars ( 4 )

$351.99

—

$565.52

$316.79

—

$508.97

Chassis Engineering Engine Swap Mounting Kits

Chassis Engineering engine swap mounting kits are designed secure your new engine to your classic vehicle. They have a large collection of complete engine mount kits for various car models. They match particular engines to specific chassis. They also offer adjustable universal kits for a large variety of engines, in a number of different lengths to make them work with just about any frame type. The engine mount style is chosen based on the type (brand/model) of engine, and the engine mount length is determined by the width of the frame. Depending on the application, these kits may include bolt-on or weld-on steel frame adapters, steel engine side mounts, a polymer cushion set, hardware, and instructions. Exchange the engine in your project with the support of Chassis Engineering engine swap mounting kits.

4.57 out of 5 stars ( 7 )

$139.00

RJays Suicide Wishbone Spring Perches

RJays offers Suicide Wishbone leaf spring perches for a variety of vintage Ford vehicles. No more cutting up spring perches to mount your spring behind your axle; now you can simply slide these brackets on your wishbone and set up your front-end without even drilling a hole. The perches mount leaf springs behind the axle on 1937-48 wishbones. Additional details: * Wrap 360 degrees around your wishbone for a very strong mount * 1 3/4 in. width tube TIG-welded on for shackle bushings * 3/8 in. plate to weld around your wishbone * Wishbones perch must be split and narrowed to fit Model A wishbones

Not Yet Reviewed

$56.99

Dakota Digital VHX Series Direct-Fit Analog Gauge Systems

Stay ahead of the curve with fresh instrumentation, like the Dakota Digital VHX direct-fit analog gauge systems. Ideal for classic car restorations, this innovative line features dozens of single dials, clusters, and multi-gauge panels, which install into your vintage ride with no modifications needed. We're talking units for various models of Ford, Chevy, Mercury, Oldsmobile, Jeep, Toyota, Buick, Pontiac, and Dodge … with new "replacements" available for cars and trucks as far back as 1932! Depending on the system you select, you could receive data readings for as many as 20 automotive functions; and, bringing the retro dashboard displays into the 21st century are bright LCD message centers, backlit faces, and fully lit needles. These gauge kits are equally impressive behind the scenes, with solid-state sensors, precision stepper motors, and customizable data readouts. Dakota Digital gauges have revolutionized the industry—just think what they'll do for your driving experience!

4.75 out of 5 stars ( 512 )

$945.25

—

$945.99

Tanks Inc. Frame Horn Covers

Tanks Inc. frame horn covers are machined from die-stamped steel for durability. They feature interlocking hemmed construction just like the original equipment. Each cover is black EDP-coated to resist rust and corrosion. Order the pair designed to fit your vehicle application.

5.0 out of 5 stars ( 1 )

$224.99

FORD STREET ROD Parts and Accessories