Availability
Showing In Stock Items. Show All 106 Items.
That clunking sound you hear beneath your vehicle might be due to a broken exhaust hanger causing your exhaust system to bounce around. If that's the case, don't sweat it—just swap out the bad exhaust hanger with a new one from Summit Racing™. These replacement hangers are available in a variety of materials and styles to best facilitate your repair. Keep your exhaust system securely positioned and attached where it belongs, with quality hangers from Summit Racing™.
( 42 )
$8.99
Manufacturer Rebate
MagnaFlow's California Universal Fit 30000 catalytic converters are the first series of a new line of converters designed for vehicles with second-generation On-Board Diagnostic (OBDII) systems. They are designed, tested, and catalogued for specific vehicles. Unlike traditional universal converters, these converters exceed strict California requirements for conversion efficiency and durability.
( 13 )
$184.30
—
$480.00
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 186 )
$97.00
—
$1,256.00
Summit Bucks
Dyno tests prove it—Dynomax's Super Turbo mufflers are the closest you can get to running an open pipe, but a lot quieter. To make things even better, Super Turbos have more features than most other mufflers put together: less backpressure for improved quarter-mile times; durable construction for long life and good looks; patented flow directors that channel exhaust for maximum performance; and fiberglass matting for a deep, throaty, powerful performance tone. The mufflers are available in a variety of configurations; inlet/outlet quantities, sizes and locations; both universal and vehicle-specific applications. They are offered in stainless steel or aluminized steel construction.
( 489 )
$63.99
—
$78.99
Headers are widely believed to be one of the best performance values available today--so why put stock manifolds on your trick ride? After dropping a different engine into your project vehicle, help it produce more horsepower and fuel economy with these specialty and engine swap headers from Hedman. They feature durable 18-gauge steel construction and have thick 1/4 in. flanges for a long-lasting, leak-proof seal. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 182 )
$299.99
—
$456.99
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 514 )
$470.55
—
$787.75
Walker steel band-style exhaust clamps combine a 360 degree seal with a unique design that won't crush pipes and ruin exhaust flow. This particular style was created to "lap-joint" two pipes of different diameters together (one pipe fits inside the other). The clamps come with pre-attached hardware and Grade 8 bolts for high strength and temperature durability.
( 242 )
$11.99
On Sale
Flowmaster Super 40 Series Delta Flow mufflers go a step beyond their original 40 Series product. By precisely placing three internal baffles in the case, and welding them to exacting specifications, the 40 Series Delta Flow mufflers not only out-scavenge the originals, but they also provide superior reductions in exterior sound levels and resonance, which are transmitted through the exhaust system and into the vehicle. You get all this, plus improved torque and horsepower—and that famous Flowmaster sound!
( 144 )
$149.95
Summit Bucks
Dynomax Ultra Flo cat-back exhaust systems are designed to optimize the power potential of your vehicle. Features include: aluminized or stainless steel mandrel-bent tubing for increased flow; steel or stainless steel Ultra Flo muffler(s) with a straight-through design—for the ultimate in performance and sound; OEM mounting and hanger locations; and all required hardware for a quick and easy installation. Plus, because these systems mount behind the catalytic converter, your vehicle will remain 50-state emissions legal! Dozens of vehicle-specific applications are available.
( 132 )
$314.99
Walker insulators are high-quality replacements made to work seamlessly with Walker aftermarket replacement parts. These exhaust insulators are manufactured from premium materials and are available in various applications.
( 74 )
$6.99
Walker exhaust tips add a beautiful, finished look to your tailpipe. Crafted from steel or stainless steel, the tips are available in a variety of lengths, cuts, edge styles, shapes, and inlet/outlet sizes. Choose from a polished or aluminized finish. These tips are functional eye-candy on the road or at a show.
( 67 )
$39.99
On Sale
The MBRP Installer Series exhaust systems give you the best of both worlds in one complete package. They provide great sound control—as well as improvements in torque and horsepower. These systems are constructed from heavy-duty, 16-gauge steel with an aluminized coating and an extra-thick layer of aluminum silica on the seams, an area often left exposed to rust. The units are available in hundreds of configurations to suit your vehicle's exhaust needs.
( 403 )
$299.99
—
$584.99
$259.99
—
$529.99
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 362 )
$169.95
Summit Racing™ Deep-Tone dual exhaust systems have a distinctive, throaty growl that turns aggressive under heavy acceleration but purrs when you're cruising. Plus, our Deep-Tone systems offer improved performance and the ability to pass a few gas stations! Summit Racing™ exhaust systems deliver aluminized, mandrel-bent steel pipes to optimize flow for unrestricted power and efficient performance. Their split rear design, with Y-pipe and glasspack mufflers, provides increased horsepower, torque, and classic sound.
( 39 )
$427.99
Got an exhaust job? Finish it like a pro with Walker U-bolt clamps. They are manufactured from premium steel for greater strength and durability. They are offered in standard and flat strap styles as well as heavy-duty with or without welded saddles. No matter which style of Walker U-bolt clamps you need, they are all designed for one purpose--to clamp your exhaust together with leak-free performance!
( 96 )
$2.99
These Summit Racing™ exhaust systems have a great sound and make additional performance at a great price. They come in different sizes and for different vehicles.
( 57 )
$237.99
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2432 )
$262.99
—
$500.99
Roush 2019-23 Ford Ranger 2.3L cold air intake and exhaust system combos pair perfectly matched components in one performance package to upgrade your truck with awesome advantages. Roush Performance cat-back exhaust systems add signature sound and style to your truck. These exhausts enhance performance, provide increased exhaust flow, and add that distinct Roush exhaust note that will make your Ranger stand out from the crowd. Crafted from corrosion-resistant 304 stainless steel with 3 in. mandrel-bent tubing for long-lasting durability, each system features twin 4 in., polished, dual-walled exhaust tips etched with the Roush logo. Everything required for complete installation is provided in the kit, which can be completed with standard garage tools in as little as two hours. Roush Performance cold air intakes deliver greater performance over the stock intake--increasing airflow and producing power gains of up to 8 lb.-ft. of torque over stock with an intake swap alone. The CAI system features a custom engineered transparent cover with Roush logo, maintains the factory air box snorkel, and increases airflow. Each kit utilizes durable injection molded parts, comes with all necessary hardware and instructions, and includes a Roush conical-style dry element filter with 21 percent more surface area than the factory filter. It doesn't need oiling and is easily washable for reuse. Experience the thrill of enhanced acoustics and performance provided with a Roush 2019-23 Ford Ranger cold air intake and exhaust system combo.
Not Yet Reviewed
$1,199.99
On Sale
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 159 )
$749.95
$487.95
—
$749.95
Summit Bucks
Dynomax Ultra Flo welded mufflers feature a straight-through design for unrestricted exhaust flow and reduces backpressure. They have a 100 percent welded design for maximum durability and stainless steel construction for lasting durability and feature CRF Technology that absorbs unwanted interior resonance, while maintaining a deep performance tone. Most of Dynomax Ultra Flow welded muffler models are universal; simply choose the style, inlet/outlet diameters and location needed for your vehicle.
( 193 )
$147.99
—
$164.99
Roush Ranger 2.3L cat-back exhaust kits add a signature Roush sound to your Ford Ranger. These kits enhance performance, provide increased exhaust flow, and adds a distinct exhaust note that will make your vehicle stand out. The systems are made from corrosion-resistant 304 stainless steel with 3 in. mandrel-bent tubing and feature twin 4 in. polished dual walled tips etched with the Roush logo. Everything required for a complete installation is provided in the kits, which can be installed with standard garage tools in as little as two hours. Additional features: * Performance gains of up to 6 hp and 8 lb.-ft. of torque over stock * 3 in. mandrel-bent tubing to ensure consistent exhaust flow * Quick and easy installation--no cutting required of the factory exhaust * Includes ROUSH 90-day limited parts warranty * Compliant with exhaust sound limit laws (including California)
Not Yet Reviewed
$899.99
—
$999.99
Dorman exhaust manifold mounting hardware is designed to replace broken, stripped, or corroded stock fasteners. The studs, bolts, and nuts are manufactured from quality materials and offered in a variety of finishes. Dozens of options are available; choose the lengths and thread sizes needed for your specific vehicle application. Pieces are sold individually, in pairs, or larger quantity sets. A secure exhaust manifold begins with Dorman mounting hardware.
( 284 )
$7.99
—
$21.99
AP Exhaust Y-pipes are direct-fit OE replacements. They are made from aluminized heavy-gauge steel with re-aluminized weld seams to prevent corrosion. Make repairs to your exhaust system with AP Exhaust Y-pipes.
( 13 )
$104.99
Summit Bucks
Dynomax Ultra Flo SS mufflers feature stainless steel construction for lifelong durability and they are completely polished for a show-quality shine. Their unrestricted, straight-through design is dyno-proven to flow up to 2,000 SCFM and support up to 1,900 hp. Each muffler uses Dynomax's exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
( 33 )
$224.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
