Availability
FORD PROBE Parts and Accessories
Showing In Stock Items. Show All 10 Items.
On Sale
MSD Blaster TFI Coils
MSD Blaster TFI coils powers up your Ford ignition system. With windings and construction similar to MSD's Blaster 2 coils, these coils have an increased turns ratio, plus lower primary resistance than your stock coil. MSD Blaster TFI coils will work with stock TFI ignition systems as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your Ford ignition system? Just bolt in one of these MSD Blaster TFI coils.
( 144 )
$80.09
$72.08
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1993 )
$158.95
—
$176.95
$143.05
—
$159.25
On Sale
MSD Street Fire Coils
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 645 )
$73.55
$66.20
On Sale
ACCEL Super Coils
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 806 )
$116.95
—
$170.95
$105.25
—
$153.85
On Sale
Holley Sniper E85 In-Tank Electric Fuel Pumps
Holley Sniper E85 in-tank electric fuel pumps are high-output models that fit the most popular EFI applications. The pumps can be regulated to support carbureted systems, as well, and all are compatible with gasoline or E85. Designed for applications requiring more fuel flow (utilizing the factory OE lines and mounting brackets), the 340 lph fuel pumps can also be used as a universal replacement—or upgrade for aftermarket applications requiring more fuel flow to support additional horsepower, while using power adders. Order the model recommended for your vehicle. Features include: * 340 lph E85-compatible * Designed for in-tank use only * Compact enough to fit in existing hanger assemblies without modification * Complete kit with all drop parts, accessories, and installation instructions * Filter, wiring pigtail, rubber hose, clamps, and rubber grommet included * Inlet filter meets or exceeds original equipment specifications and provides improved filtration/durability * Can be used with carbureted or EFI applications * Perfect upgrade for aftermarket pumps, like Holley retrofit EFI modules, when more fuel is needed with turbos or nitrous
( 30 )
$172.95
$155.65
On Sale
ACCEL Replacement Ultra Tork Starter Solenoids
ACCEL replacement Ultra Tork starter solenoids are designed to fit your Ultra Tork starter without any modifications. If you're in need of replacement parts, ACCEL has you covered.
( 23 )
$54.05
$48.65
On Sale
ACCEL Fuel Injectors
ACCEL Performance fuel injectors provide precise control of fuel delivery and atomization for increased power, improved throttle response, and better fuel economy. They feature either a high or low-impedance design to function accurately with your vehicle's ECU. ACCEL fuel injectors come complete and ready for installation with precision-molded O-rings and fine-mesh fuel strainers. More product features and notes: * Utilize a new low-mass disc design that ensures a spray pattern for ultra-fine atomization and improved burn efficiency * Higher than stock flow rates may require reprogramming
( 221 )
$485.95
$436.95
On Sale
Flowmaster 40 Series Delta Flow Mufflers
Flowmaster Super 40 Series Delta Flow mufflers go a step beyond their original 40 Series product. By precisely placing three internal baffles in the case, and welding them to exacting specifications, the 40 Series Delta Flow mufflers not only out-scavenge the originals, but they also provide superior reductions in exterior sound levels and resonance, which are transmitted through the exhaust system and into the vehicle. You get all this, plus improved torque and horsepower—and that famous Flowmaster sound!
( 144 )
$152.95
$137.65
On Sale
ACCEL Distributor Cap and Rotor Kits
ACCEL performance distributor cap and rotor kits offer superior protection from damaging misfires. High-output racing ignition systems place severe demands on these components, and that's why ACCEL makes sure these kits provide optimal shielding against damage. The ACCEL performance distributor cap and rotor kit designed for your application will defend your parts against high voltage, surges of spark current, and high temperatures, all of which can liquify run-of-the-mill cap and rotor's molded parts! More product features include: * High-quality compound caps ensure stability * Corrosion-resistant inserts help provide high-sparking energy flow
( 73 )
$46.30
$30.85
On Sale
Summit Bucks
Mishimoto Spiked Lug Nuts
Details matter when you're building your dream car. Every bolt is meticulously chosen for not only function, but also aesthetics. This philosophy extends to every part of the car, including the lug nuts. To add aggressive style to your wheels, Mishimoto high-quality spiked lug nuts should be your choice. Mishimoto spiked lug nuts are cold-forged, carbon steel with a 4 in. spike design available in several colors that will add an aggressive look to any set of wheels. These lug nuts feature a 60-degree tapered/acorn seat, a one-piece design, and an electroplated coating to ensure unparalleled durability in any climate. To make installation easy, Mishimoto includes an extra-deep socket, and like all Mishimoto products, these spiked lug nuts include their Lifetime Warranty for long-lasting style. Choose the size and color needed.
Not Yet Reviewed
$92.95
$87.25
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster