Availability
Showing In Stock Items. Show All 212 Items.
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$741.99
Centerforce DYAD XDS twin disc clutch kits feature a patented centrifugal weight system (where applicable) for superior clamp load over stock. Every kit is equipped with a lightened billet steel flywheel—providing low inertia and resulting in quicker rpm. All components are match-balanced and ready for installation using ARP fasteners. Order the kit designed for your specific vehicle. Centerforce DYAD XDS twin disc clutch kits may feature: * No complicated setup or adjustments * Race-proven paddle-style discs * Quiet, positive drive floater * Great drivability and light pedal effort * Excellent driver control * Specification card * Greater longevity * Holds 400 to 1,600 lbs.-ft. of torque at the flywheel * Fully dampened clutch system developed for vehicles with extreme power levels
( 1 )
$1,889.95
Summit rear window louvers will give you a dose of the late '60s/early '70s flavor, plus privacy and sun protection. Choose from black-painted aluminum, UV-resistant textured black ABS plastic, and ready-to-paint smooth ABS plastic (depending on the application). Whichever you choose, they install quickly using steel mounting plates with pre-applied adhesive, which allows you to remove the louvers to clean the window.
( 202 )
$498.99
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z26 Street Warrior brake upgrade kits are recommended for high performance, high-horsepower muscle and modified cars. These kits come with everything you need for an easy installation, including pads, rotors and stainless steel hardware. The drilled and slotted rotors and carbon fiber ceramic pads combine to provide shorter stops under the most demanding conditions. PowerStop's Z26 Street Warrior kits are affordable bolt-on upgrades that deliver the braking power you need to rein in all those ponies, and with their low-dust and noise-free formula, you'll spend less time cleaning your wheels and more time enjoying what matters most--the drive.
( 761 )
$336.99
Ford Performance Parts 2007-12 Mustang GT500 one-piece driveshafts deliver peak endurance and optimum strength for increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 51.653 in. (1,312 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Off-road use only
( 1 )
$854.99
Flaming River manual rack and pinions are built from lightweight aluminum castings—and feature chrome plated center tubes and two mounting holes. Designed to meet the standards of professional street rod and race car chassis builders, they weigh less than 15 lbs. each. These rack and pinions are a great way to streamline the engine compartment while maintaining smooth, responsive steering.
( 54 )
$934.99
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 25 )
$529.95
—
$619.95
Ford Performance Parts anti-sway bars are designed to reduce body roll and improve overall handling and cornering. They are manufactured from high-quality materials and are custom-fit for your specific vehicle. Ford Performance Parts anti-sway bars tighten up your suspension, offering much-improved handling and cornering performance. Kits include all mounting hardware and are best when used with Ford Performance Parts struts, shocks, and springs. Note: Some factory fasteners are one-time use. Refer to the appropriate Ford service manual for reuse information and correct torque specifications.
( 7 )
$479.99
On Sale
Whiteline sway bars are designed and engineered to dramatically improve grip, handling, and outright performance. Available for front or rear sway bar applications, depending on your suspension part needs, these anti-sway bars will bring out the absolute best-handling performance possible in your vehicle. So, when you are servicing your sway bar assembly, choose these high-quality sway bar components from Whiteline—the suspension experts! Order the sway bar model designed for your specific part application needs.
( 24 )
$415.88
—
$739.88
$291.12
—
$517.92
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 4 )
$955.34
—
$1,123.38
Stainless Power products are designed by Stainless Works, and made exclusively to our exact specifi cations from the highest quality 304 stainless steel. Factory manifolds can be restrictive and hold back the true potential of your ride. Stainless Power headers unlock the power of your engine. Our long tube, free- flowing design reduces back pressure, and will bring new found power that you can feel and hear.
( 18 )
$1,614.05
Make lifting your vehicle a breeze with Steeda Ultra-Lite jacking rails. These lightweight systems are made in-house from sturdy CAD-designed, laser-cut, high-strength steel and feature a durable finish. They're available as weld-in or a simple bolt-in design that can be removed at any time using factory mounting holes. The rails are offered in different lengths to help with your strengthening needs. They allow you to jack up your car with confidence anywhere along the rail, preventing damage—and also function as undercarriage protection if you are riding lowered. The rails add strength and function to your vehicle and make putting your car up on stands quick and easy.
( 26 )
$229.95
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 64 )
$799.00
Classic Design Concepts Mustang Classic light bars are the highest quality light bars offered in today's competitive market. These light bars are manufactured from 1 1/4 in. steel tubing with a 1/8 in. wall thickness for maximum durability. Polyurethane foam covers the steel and is then wrapped in a styling vinyl. These light bars are perfect if you want to upgrade your vehicle to a different look. Classic Design Concepts Mustang Classic light bars are designed to fit your vehicle by application. These light bars are not intended to be used as roll-over protection.
( 14 )
$515.00
MBRP Black Series exhaust systems maximize exhaust flow and minimize exhaust temperatures—so your truck will use less gas, last longer, and perform better. The systems are built from aluminized steel, with a durable high-heat black powdercoat finish. Fully mandrel-bent tubing, with minimal bend degree angles, allows the exhaust to exit quickly; and the seams are fully sealed to resist rust. Black Series systems are available for gas truck/SUV, diesel, and muscle car applications. Order the model designed for your specific vehicle—and add some style and performance! Additional features and benefits: * Road, track, and dyno-tested * Vehicle-specific muffler design * Bolt-on, no-weld design for hassle-free installation * Direct-fit to the OEM hangers; clamps and accessories included * One-year coating warranty; 3-year workmanship warranty
( 31 )
$714.99
—
$764.99
On Sale
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 163 )
$549.95
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,487.50
Is it time for a brake job? If so, then pick up one of these Ford Performance Parts Mustang GT 14 in. brake upgrade kits to help stop your Mustang more quickly and consistently. They include two vented 14 in. diameter rotors, two 4-piston aluminum black anodized Brembo brake calipers, front and rear brake pads, front disc brake backing plates, and a set of four DOT-approved stainless steel brake lines. Decrease your stopping distance with one of these Ford Performance Parts Mustang GT 14 in. brake upgrade kits.
( 2 )
$1,692.99
On Sale
Whiteline GS1 Grip Series 1 kits activate more grip for more performance. These suspension packages feature Whiteline signature front and rear adjustable (where applicable) sway bars, drop links, and performance lowering springs. Outfit your car with the ultimate entry level suspension upgrade that offers more handling, comfort, and performance—Whiteline GS1 Grip Series 1 kits. Order the kit designed for your vehicle application.
Not Yet Reviewed
$998.88
$699.22
Clearance
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 321 )
$550.99
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,088.00
—
$2,764.00
Tremec T-56 Magnum XL manual transmissions begin with an "extended length" rear extension housing, intended for late model performance applications cursed with factory "semi-remote" shifters. By offering the owners of these vehicles a rigid, "direct-shift" with the Magnum XL, gone are the days of clumsy, rubbery-feeling gear changes. Like the rest of the Magnum line, the XL offers crisp, low-effort shifts, and an industry leading 700 lb.-ft. of torque capacity. And, thanks to its race-proven synchronizer technology, the Tremec T-56 Magnum XL is equipped to deal with all but the highest revving engines, with an rpm capacity nearing 8,000 rpm straight out of the box. Order the specs preferred for your application.
Not Yet Reviewed
$4,495.00
PowerStop Z17 Evolution Plus stock replacement brake kits with calipers have everything you need for an easy, bolt-on solution for your daily driver. They include Z17 Evolution Plus ceramic pads, Autospecialty brake rotors, and non-coated replacement calipers, along with stainless steel hardware. If you need a complete, fast, and easy solution that meets original equipment standards, then PowerStop's Z17 Autospecialty brake kits with calipers are the ideal choice to refresh your braking power. (Some models may include rotors for only the front or only the rear.)
( 50 )
$381.69
—
$1,008.60
On Sale
Get cargo area protection with WeatherTech AVM Trim-to- Fit cargo mats! These mats protect your vehicle's cargo area carpeting from wear and tear, moisture and stains, and help prevent your cargo from shifting and tipping. These cargo mats feature a textured finish along with tall outer ridges and channels to contain spills and dirt. Made from a soft, flexible compound that won't curl crack or harden even in sub-zero temperatures; these mats contain no harmful PVC's, cadmium or lead, and are 100 percent recyclable! These trim-to-fit, high quality cargo mats are available in a choice of colors to compliment your interior.
( 4 )
$73.95
$66.56
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
