Availability
Showing In Stock Items. Show All 182 Items.
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 16 )
$689.99
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$670.00
—
$981.40
Summit rear window louvers will give you a dose of the late '60s/early '70s flavor, plus privacy and sun protection. Choose from black-painted aluminum, UV-resistant textured black ABS plastic, and ready-to-paint smooth ABS plastic (depending on the application). Whichever you choose, they install quickly using steel mounting plates with pre-applied adhesive, which allows you to remove the louvers to clean the window.
( 201 )
$498.99
Procar Series 1614 seats are perfect to reinforce a traditional, classic look for your interior. They feature stylish vertical stitching, sleek lines, and side bolsters for maximum support and comfort. The adjustable bucket seats incline and recline via lever control. Each seat is built with TIG-welded steel tubing, injection-molded foam, and suspension straps for support and comfort; and sliders are included. Procar Series 1614 seats are available for the driver or passenger side, in a choice of material and colors.
( 3 )
$297.99
Complete your suspension upgrade with Eibach anti-roll sway bar kits. They reduce body roll over stock bars through increased design stiffness. The result is better handling and cornering grip in any performance-driving situation. Eibach sway bars are manufactured from cold-formed steel alloy for precision performance, and finished with a long-lasting red powdercoat. Order the Eibach anti-roll kit designed to fit your application. Product features: * Depending on application, some kits come complete with all mounting hardware, while others may require separate mounting kits * Unimpaired spring comfort at bilateral spring deflection * Decreasing the load difference between the wheels inside and outside the curve * Impacting the under- or over-steering tendency positively (auto-steering behavior)
( 72 )
$285.00
—
$570.00
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 25 )
$529.95
—
$619.95
Ford Performance Parts anti-sway bars are designed to reduce body roll and improve overall handling and cornering. They are manufactured from high-quality materials and are custom-fit for your specific vehicle. Ford Performance Parts anti-sway bars tighten up your suspension, offering much-improved handling and cornering performance. Kits include all mounting hardware and are best when used with Ford Performance Parts struts, shocks, and springs. Note: Some factory fasteners are one-time use. Refer to the appropriate Ford service manual for reuse information and correct torque specifications.
( 7 )
$479.99
On Sale
Whiteline sway bars are designed and engineered to dramatically improve grip, handling, and outright performance. Available for front or rear sway bar applications, depending on your suspension part needs, these anti-sway bars will bring out the absolute best-handling performance possible in your vehicle. So, when you are servicing your sway bar assembly, choose these high-quality sway bar components from Whiteline—the suspension experts! Order the sway bar model designed for your specific part application needs.
( 24 )
$415.88
—
$739.88
$291.12
—
$517.92
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 608 )
$995.00
Get closer to the road with Classic Design Concepts chin spoilers. They give your Mustang a powerful stance and they're easy-to-install. Crafted from the same injection-molded TPO material that Ford uses, these OE-quality spoilers require no drilling to install and blend nicely with your Mustang's lower fascia. The textured black finish on these chin spoilers creates an intimidating appearance that retains a fresh, factory look. They come available for several Mustang years and styles. Complete the look of your American muscle with chin spoilers from Classic Design Concepts.
( 11 )
$199.00
Free-flowing, mandrel-bent Pypes After-Cat X-pipes have reinforcing plates at critical locations and are available in 409 stainless steel or polished 304 stainless steel for years of high-powered performance. Since V8s fire unevenly, exhaust exits in pulses rather than in a steady flow. While one pipe is filled with pressure, the other pipe is relatively pressureless, but the connecting of the two pipes in a siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipe more quickly and the improved 'breathing' increases horsepower. Their high-quality, exceptionally versatile design and performance are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. There's no skimping on materials here. All crossovers include dual 409 stainless reinforcement plates at the welds, where they are needed the most. All pipes are mandrel-bent, allowing for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, the smooth, seam-coated, mandrel-bent, 409 stainless steel pipe resists corrosion and extends the life of your system. The kits include the X-pipe with extended legs, cutout covers, cover hardware, and installation hardware.
( 4 )
$201.79
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 303 )
$599.95
—
$1,349.95
$538.95
—
$1,213.95
MBRP XP Series exhaust systems are designed to withstand the toughest conditions, on and off the road. Their rugged, thick, 16-gauge stainless steel tubing won't rust through. They feature solid, reinforced welds at vital stress points, making certain that your system stays securely mounted. The MBRP XP Series mufflers and pipes deliver a rich, mellow exhaust note and are finished off with a mirror-polished, stainless steel, rolled-edge exhaust tip. They're available in a wide variety of styles and configurations to fit your specific vehicle.
( 243 )
$714.99
Clearance
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,150.00
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,395.00
On Sale
XForce Varex exhaust systems deliver the power, sound, and style you desire. Fabricated with the strength and beauty of 304 stainless steel, they're also designed for unrestricted flow and high performance. The systems feature XForce's patented muffler innovation, Varex, that's engineered with sophisticated butterfly valve mechanisms. This allows you to select optimal power output and sound levels to meet your desired preference by directing the flow of exhaust gases. You can choose to purr in street mode, roar in racing mode, or growl somewhere in between. XForce Varex exhaust systems look fabulous and hand the control of power and sound to you. Order the style, size, and configuration recommended for your vehicle.
( 51 )
$899.10
Classic Design Concepts Mustang Classic light bars are the highest quality light bars offered in today's competitive market. These light bars are manufactured from 1 1/4 in. steel tubing with a 1/8 in. wall thickness for maximum durability. Polyurethane foam covers the steel and is then wrapped in a styling vinyl. These light bars are perfect if you want to upgrade your vehicle to a different look. Classic Design Concepts Mustang Classic light bars are designed to fit your vehicle by application. These light bars are not intended to be used as roll-over protection.
( 14 )
$515.00
Is it time for a brake job? If so, then pick up one of these Ford Performance Parts Mustang GT 14 in. brake upgrade kits to help stop your Mustang more quickly and consistently. They include two vented 14 in. diameter rotors, two 4-piston aluminum black anodized Brembo brake calipers, front and rear brake pads, front disc brake backing plates, and a set of four DOT-approved stainless steel brake lines. Decrease your stopping distance with one of these Ford Performance Parts Mustang GT 14 in. brake upgrade kits.
( 2 )
$1,692.99
On Sale
Whiteline GS1 Grip Series 1 kits activate more grip for more performance. These suspension packages feature Whiteline signature front and rear adjustable (where applicable) sway bars, drop links, and performance lowering springs. Outfit your car with the ultimate entry level suspension upgrade that offers more handling, comfort, and performance—Whiteline GS1 Grip Series 1 kits. Order the kit designed for your vehicle application.
Not Yet Reviewed
$998.88
$699.22
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 231 )
$879.00
Summit Bucks
Edelbrock E-Force Mustang Stage 1 Street Legal supercharger kits transform your Mustang into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 degrees of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. These Mustang supercharger systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.
( 2 )
$6,567.26
—
$7,826.95
Flaming River manual rack and pinions are built from lightweight aluminum castings—and feature chrome plated center tubes and two mounting holes. Designed to meet the standards of professional street rod and race car chassis builders, they weigh less than 15 lbs. each. These rack and pinions are a great way to streamline the engine compartment while maintaining smooth, responsive steering.
( 54 )
$934.99
Tremec T-56 Magnum XL manual transmissions begin with an "extended length" rear extension housing, intended for late model performance applications cursed with factory "semi-remote" shifters. By offering the owners of these vehicles a rigid, "direct-shift" with the Magnum XL, gone are the days of clumsy, rubbery-feeling gear changes. Like the rest of the Magnum line, the XL offers crisp, low-effort shifts, and an industry leading 700 lb.-ft. of torque capacity. And, thanks to its race-proven synchronizer technology, the Tremec T-56 Magnum XL is equipped to deal with all but the highest revving engines, with an rpm capacity nearing 8,000 rpm straight out of the box. Order the specs preferred for your application.
Not Yet Reviewed
$4,495.00
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 933 )
$979.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
