Availability
Showing In Stock Items. Show All 74 Items.
JLT engineers set out to create the biggest and baddest intake on the market—and the result was their JLT Performance Series 1 cold air intake kits. These assemblies are fully computer designed to optimize space and give the best fit and finish. A roto-molded plastic tube resists engine heat and keeps the intake air charge nice and cool; while a smooth, tapered path to the throttle body increases air speed and horsepower. The intakes also feature a heat shield designed to help keep hot air out by firmly hugging and sealing itself to the contours of the hood. For great looks and more power, order the JLT Performance Series 1 cold air intake kit designed for your vehicle application.
( 6 )
$259.00
—
$349.00
Using their original cold air intakes as a guide, JLT engineers molded, sculpted, and perfected everything until they had the best looking, fitting, and performing system money can buy: the JLT Performance Series 2 cold air intake kits. One of the best parts of these assemblies is their molded-in MAF housing right in the tube. This allows you to own an intake kit you can grow into and not have to upgrade or replace when you reach a certain horsepower threshold. If you drive a high performance machine and only want the best, you can trust JLT Series 2 cold air intake kits to deliver!
( 6 )
$259.00
—
$319.00
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$367.99
—
$603.99
$317.99
—
$553.99
Although the Series 2 Cold Air Intake kits have been a huge success, JLT Performance engineers have outdone themselves again by creating the Performance Series 3 Cold Air Intake kits. The new Series 3 Cold Air Intake kits feature a 4 1/4 in. I.D. roto-molded plastic tube designed to resist engine heat and keep the intake air charge nice and cool. With having a 110mm MAF molded right into the tube, airflow is fast and smooth. Horsepower gains of up to 20-30 hp are typical when the JLT Performance Series 3 Cold Air Intake kits are installed with the required proper tuning. Order the model recommended for your vehicle.
( 2 )
$259.00
Set your engine free to breathe cool, dense air for increased horsepower and fuel economy normally restrained by your factory air box. Roush Mustang cold air intake kits increase horsepower, torque, and fuel mileage with improved throttle response. These Mustang cold air intake kits are much more efficient than stock. They feature a reusable filter element that traps the smallest particles and a cool air dam that surrounds the filter to keep hot air from the engine and further maximize performance. Roush Mustang cold air intake kits are easy to install; just grab your basic tools, and you're ready. For a legendary ride, go with the performance engineers at Roush.
( 20 )
$287.99
—
$549.99
Roush cold air intakes feature a premium reusable air filter with a mounting clamp and a custom-formed, glass-filled nylon air box tray. Some models will include a high-flow 3 in. stainless steel induction tube. These intakes utilize your factory PCM calibration and give you a sleek black factory look. You'll gain power and performance with a Roush cold air intake, available for fitment on dozens of vehicle applications.
( 37 )
$429.99
Increase performance and torque with one of these Roush Performance Ford Mustang V8 cold air intake kits. They include a lifetime high-flow air filter element that can be cleaned and re-oiled, a 4 in. roto-molded intake tube that is larger than any other intake on the market, and a lightweight, composite cool air dam. Roush Performance Ford Mustang V8 cold air intake kits install easily with no cutting or drilling required.
( 6 )
$359.99
On Sale
Built for power and show, K&N 69 Series Typhoon cold air intake kits are engineered to dramatically reduce intake restriction, resulting in additional horsepower and torque. These air intake kits primarily feature a free-flowing, mandrel-bent aluminum tube induction system designed to fit many performance vehicles. The Typhoon kits come in one of three designs: cold air intakes, short ram intakes, or complete cold air intakes—which can be configured as either cold air or short ram intakes. Some air intake models feature high-quality tube and end cap finish options, including polished aluminum, and black, blue, red, or silver powdercoated, among other options. Order the K&N 69 Series Typhoon cold air intake kit that is suited to fit your vehicle application.
( 462 )
$472.99
—
$839.99
$422.99
—
$789.99
BBK cold air induction systems are a quick and easy way to gain an additional 10-14 hp! These kits feature a long-lasting conical air filter and an unmatched high-flow design for superior performance and striking good looks. The tubes are available in steel and aluminum, with a half-dozen finish options. Order the model designed for your vehicle and engine application. Don't just take our word for it—BBK Cold Air Induction Systems can be found under the hoods of thousands of cars from coast to coast.
( 45 )
$279.99
—
$449.99
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$209.95
—
$719.95
In minutes, BBK Blackout Series cold air intake systems can add a stealthy, modern look under the hood--along with improved horsepower and throttle response. Their high level of performance with stock engine control programs are achieved by utilizing a custom, integral, mass air housing that is machined and inserted into the intake tube that features a factory mass air calibration. Features and benefits of BBK Blackout Series cold air intake systems include: * Optimized for specific applications to work with OEM computer settings * Flow up to 75 percent more air than restrictive stock intakes * Washable, cotton element, high-flow conical filters * Designed and dyno-tested to offer maximum horsepower, torque, and throttle response * Direct-fit replacement, easily bolt on in 30 minutes or less with simple hand tools, no tune required * CNC mandrel-bent intake tubing maximizes airflow * Powdercoated black-out finish that looks great under the hood * High-quality molded silicone hoses and stainless steel clamps * Unmatched performance that today's enthusiasts demand
( 23 )
$299.99
—
$399.99
JLT Performance Big Air Intake kits are designed to make huge power! These assemblies have a large ID at the mass airflow (MAF) sensor and a sizable opening at the throttle body—to meet the demands of the largest throttle bodies the aftermarket has to offer. Included is an ABS plastic heat shield to block off engine heat at idle and low speeds, and a top-of-the-line Powerstack filter with deep pleats and built-in screens to strengthen airflow across the MAF. The Big Air units are then finished off with silicone reducers and stainless clamps, creating the best intake on the market! The intake tubes are also available with a hydrocarbon finish or painted in your car's exact body color. See other Big Air options on the Summit Racing™ site.
( 3 )
$349.00
—
$399.00
JLT Performance Ram Air intake kits bring great looks and huge power to your ride! These assemblies have a large I.D. at the mass airflow sensor (MAF) and a sizable opening at the throttle body—to meet the demands of the largest of throttle bodies the aftermarket has to offer. Included is a roto-molded heat shield to block off engine heat, a top-of-the-line Powerstack air filter with deep pleats and built-in screens to strengthen airflow across the MAF. The units are then finished off with silicone reducers and stainless clamps, creating the best intake on the market! Pump up the volume of cool air to your engine with JLT Performance Ram Air intake kits.
( 1 )
$249.00
—
$269.00
On Sale
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$367.99
$299.99
—
$317.99
Easily add a cone-style filter to the end of your SCT 90mm Big Air MAF meter with one of these SCT Big Air 2900 MAF cone filter adapters. The SCT Big Air 2900 MAF cone filter adapter flange is CNC-machined from aluminum for superior strength, and yet is lightweight. They're designed to fit either a BA-2600 or BA-3000 SCT Big Air 90mm MAF meter.
( 2 )
$59.99
On Sale
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 834 )
$199.99
$174.99
On Sale
Airaid revs up your engine with its SynthaMax MXP Series cold air intake kits! These induction units offer a high performance, maximum-flow design teamed with high-tech filtration technology at its best. Their one-piece, roto-molded air box cancels out restrictive factory designs, while their massive cross-linked, high-density polyethylene air intake tube maintains proper air/fuel ratios; no recalibration is needed after the install. Add to this the super-synthetic, oil-free maintenance of SynthaMax washable, reusable filters—and you have clean, cold air for your gas or diesel beast to breathe for improved horsepower and torque.
( 9 )
$367.99
$317.99
On Sale
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$372.00
—
$408.00
$334.80
—
$367.20
Bolting 30 extra horsepower onto your vehicle doesn't get much easier than using these March Performance Ram Air kits. They add 15 hp by scavenging cold air from under the bumper and forcing it into your engine. These kits include an air scoop, a flex hose, hardware, and instructions.
( 7 )
$173.99
—
$218.99
Designed to be run with your Edelbrock E-Force Competition supercharger, these E-Force air intake systems can add additional horsepower to your vehicle--and who doesn't want more power? E-Force Competition air intake systems feature an open element style cold air system with an integral mass air meter, a cone-style air filter that can be cleaned, oiled, and reused, and a large molded plastic heat shield to block high temperatures and permit a rush of cool air into your supercharger! Kits are available for a variety of applications from 2005 and up.
( 1 )
$509.95
—
$676.95
On Sale
K&N Blackhawk cold air intake kits not only look impressive under the hood, but they are also designed to improve airflow while providing outstanding filtration to protect your engine. The designs have undergone rigorous testing, and the resulting power and torque gains have been impressive. They feature lightweight aluminum tubing cut and shaped to precise specifications, surfaces are carefully hand worked to remove any rough edges or metal burrs, and a K&N engraved metal plate is welded in place. The tubes are then powdercoated with a durable flat black finish. The kits include a black DRYFLOW synthetic washable air filter with thick, low-restriction filter media, which protects the engine without the need for air filter oil. These assemblies include all the hardware necessary for an easy installation. The air must flow--and it will when you order the K&N Blackhawk with DRYFLOW cold air intakes best suited for your application!
( 268 )
$419.99
$369.99
On Sale
Scott Drake offers reproductions of the extremely rare 1967-68 Early Mustang 390 GT High Performance air cleaners. These concours-correct models are available with or without the Emissions Control Tube, and they include a blue base and chrome lid. The air cleaners are an excellent stock-appearing performance upgrade for the very restrictive 1968-70 390-428 air cleaners. Some early production 1968 390 GTs may have come from the factory with this air cleaner.
Not Yet Reviewed
$525.95
JLT Performance Super Big Air intake kits are the biggest and baddest cold air intake kits on the market. If you're rocking huge horsepower under the hood, this cold air intake is for you! These assemblies feature a roto-molded plastic intake tube with a full 5.5 in. I.D. at the throttle body and 6 in. I.D. at the filter—along with a massive 148mm MAF housing built right into the tube! Super Big units also include a monster sized top-of-the-line Powerstack air filter with a built-in screen to strengthen airflow. An ABS plastic heat shield with two mounting points and a weatherstrip that seals to the hood combine to block off an amazing amount of engine heat. Want the best performance from your muscle car? Order a JLT Super Big Air intake kit!
Not Yet Reviewed
$399.00
On Sale
Airaid SynthaFlow MXP Series cold air intake kits offer the power principle--more flow equals more power! They feature a less-restrictive, one-piece, rotational-molded air box and a totally redesigned air intake tube. The air boxes house an oiled cotton/synthetic true performance filter--SynthaFlow. When it's combined with the computer-designed air intake tube and built-in velocity stack (depending on the application), you'll have more airflow with improved horsepower, torque, and mpg. And, better yet, you just bolt them on and go! All MXP Series cold air intake kits include all of the necessary hardware and easy-to-follow instructions for a quick and hassle-free installation. Helping your engine breathe better increases its performance, and Airaid SynthaFlow MXP Series cold air intake kits are the ultimate in cold air induction.
( 9 )
$419.99
$369.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
