Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
FORD MUSTANG Chassis & Suspension
Heidts 1964-70 Ford Mustang PRO-G Independent Rear Suspension Kits
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$14,973.00
Heidts Mustang II Front Suspension Kits
Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware
( 5 )
$2,700.00
Heidts 4-Link Rear Suspension Kits
Heidts 4-link kits transform your classic vehicle into a high performance fun street machine with a modern suspension. These complete kits stiffen the body, and the tunable rear 4-links provide the best traction and bring a ton more tuning potential to the table. Bolt-in and weld-in kits are both available. Heidts utilizes proven engineering and design for high performance street and track purposes.
( 2 )
$2,411.00
Scott's Hot Rods IFS Packages
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$3,682.99
—
$5,398.99
Bilstein AK Series Shocks and Struts
Bilstein AK Series shocks and struts let you take full control of your race car. The AK Series feature sealed steel bodies with monotube gas pressure construction for full damping power, even under extreme stress. They provide high-level traction and precise handling, as well as safety for your powerful sport suspension. Pure stock, street stock, or mini-stock Bilstein AK Series shocks and struts have what you need for the best handling, most responsive, and most stable design possible for your application.
( 7 )
$403.00
Heidts Pro-G Independent Rear Suspension Kits
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$14,973.00
—
$15,504.00
AJE Suspension Mustang Tubular K-Member Complete Swap Kits
Are you swapping in a new engine to your Mustang? If so, AJE Suspension Tubular Mustang K-member swap kits should be your choice to drop the engine you want under the hood of your pony. These swap kits are produced exclusively by AJE Suspension with bolt-in K-members that fit your Mustang and the necessary motor mounts to mount any engine--Chevy or Ford! First, AJE motor mounts are stronger than factory setups, so they can handle the power of your turbos and blowers. Second, their K-members are crafted from steel. They offer no bent tubes and triangulated load paths to deliver the strength that you need without adding extra weight that you don't need, as well as extra header/oil pan clearance! The swap kits also include A-arms, coil-over spring kits, and, depending on the application, caster/camber plates. One last thought--if you decide to part with your pony and keep your engine, you'll have plenty of interested parties, as the new buyer can mount any engine they choose without changing the K-member. Why waste money on K-members that mount only one family of engines? Compare price, quality, and design--you'll be ready to update your pony with the suspension technology of AJE Suspension tubular K-member complete Mustang swap kits.
( 12 )
$3,004.99
—
$3,006.99
AJE Suspension Rack and Pinion Kits
Rejuvenate the steering on your classic pony car with an updated rack and pinion kit from AJE Suspension. These components are packaged together to improve the handling and feedback you experience behind the wheel of a resto-mod Mustang. Value, functionality, and performance--everything you'd expect from an AJE rack and pinion replacement kit!
( 1 )
$656.99
Global West Suspension Plus 3 Upper Control Arms
Global West Suspension Plus 3 upper control arms improve the caster and performance of your classic Mustang. Plus 3s are engineered to provide your ride with three degrees of positive caster. Caster plays an important role in the handling of your car, and normally, when running larger tires, your adjustments are limited in order to keep your tires from hitting the front fender during turns. But, now with Global West Plus 3 upper arms, you'll be able to get the caster you need to maintain optimum performance. The control arms are powdercoated, assembled, and shipped with billet cross shafts, Del-a-lum bushings, and ball joints. Order the pair recommended for your application.
( 19 )
$599.00
Classic Performance IFS Front Suspension Packages
Classic Performance IFS front suspension packages are designed to convert the entire front suspension of your classic car. You can now enjoy the smooth ride and handling of independent suspension, while lowering the ride height of your vehicle. Order the package recommended for your vintage application. Features include: * New crossmember * Tubular upper and lower control arms with polyurethane bushings * Manual rack and pinion with tie rod ends * Coil springs (some kits may include adjustable billet coilovers with springs) * Heavy-duty forged steel spindles * Brake calipers and rotors
( 7 )
$1,920.99
