Filters
Replacing older OE converters can be a challenge, often compelling customers to settle for makeshift solutions. You can remedy such an issue by choosing a LuK Clutch TorCon torque converter to restore smooth shifting to your automatic transmission. LuK's selection of converters provide the correct fit and function, covering a wide range of vehicles, assuring you will be able to find the proper unit for your vehicle.
( 2 )
$393.99
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 39 )
$117.99
—
$141.99
Timken Bearing wheel bearing and hub assemblies are the key to restoring your vehicle's smooth and safe ride. They're made to meet or exceed OEM specifications and are available for a variety of domestic and import vehicles. ABS sensors are included where necessary. Order the replacement model needed for your application.
( 227 )
$69.99
—
$129.99
Exedy offers OE flywheels for a variety of applications, including many Honda©, Acura©, Subaru, Scion models from early 2000s and up. Flywheel hot spots can cause chatter—and resurfacing a flywheel doesn't always remove hot spots. The flywheel may appear fine, but the hot spots will often still be there. These stock replacements are machined from ductile iron in different sizes and configurations. They smooth the power output in reciprocating engines, store and deliver energy at higher rates than the source, and control the orientation of a mechanical system using gyroscope and reaction wheel. It's often recommended to replace both the flywheel and clutch at the same time. Order the flywheel designed for your vehicle.
( 1 )
$168.84
TransGo valve body repair kits give you the components needed to restore proper shifts and correct other problems with your automatic transmission. They will help correct cold rough shifts, downshift problems, long shifts, hard or soft shifts and lockup problems. Repair your automatic transmission with TransGo valve body repair kits.
( 5 )
$88.71
—
$114.43
Dorman power take-off assemblies are 100 percent new, not remanufactured, and rigorously tested for long-lasting durability and an extended service life. These PTOs transfer high-power and torque from your vehicle's engine or off a gear in the transmission to auxiliary components to reach peak vehicle speeds. They are direct replacements and easily connect to mating driveshaft on the application end. Restore drivability and all-wheel drive (AWD) functionality with Dorman power take-off assemblies.
( 1 )
$1,141.99
Timken clutch pilot bearings keep the transfer of power efficient! Leaders in friction management, Timken starts with high-quality steel and ends with precision-machined pilot bearings that will provide anti-friction alignment between your transmission and clutch. Timken puts you in motion and makes you good to go with their well-made, cost-effective pilot bearings.
( 23 )
$8.99
Dorman CV joint boots protect your CV joints from destructive dirt and moisture. A common cause of CV joint failure is cracks in the CV boot. When the boot is cracked, it allows dirt and grit to mix in with the grease and wear down the parts of the joint. CV boots should be replaced as soon as cracking is visible in their rubber folds. Pick up one of these Dorman CV joint boots to eliminate the problem.
( 5 )
$27.99
—
$29.99
Replace your worn-out concentric slave cylinder with affordable Sachs Stock Replacement parts. These components are built to OEM specifications to offer the same fit, form, and function as the factory component. The concentric slave cylinder (CSC) combines the clutch release bearing and the slave cylinder to an integrated unit. As a result, the release fork between the clutch release bearing and the slave cylinder as well as the respective bearing points are not required. Assembly takes place directly on the transmission. All Sachs concentric slave cylinder components are designed to provide superior transmission shifting and dependability to help you restore your vehicle back to its proper operation. Select the model designed for your application needs.
Not Yet Reviewed
$77.99
FAG USA pilot bearings offer high-quality for your project. They are produced worldwide for a wide range of applications to keep the input shaft centered and drivetrain vibrations down. Choose the one you need for your vehicle.
Not Yet Reviewed
$4.99
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$357.32
Moog wheel bearing and hub assemblies feature problem-solving innovations and include application-specific design enhancements. They are engineered to overcome problems and deliver smooth, reliable performance. Features and benefits of Moog wheel bearing and hub assemblies include: * Roll-form design ensures consistent and optimal preload * Precision-matched components; rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration * Moog abrasion-resistant ABS cord manufactured from a blended material that offers increased abrasion resistance and better protection from adverse conditions * For applications that require it, ABS molded shield and socket connections for even greater defense against contamination * Premium quad-lip seal design ensures maximum protection from contamination * Wheel studs have a protective coating that helps prevent rust and corrosion, enabling easier removal and proper torqueing of wheel nuts
( 695 )
$54.99
—
$154.99
Dura-Bond automatic transmission bushings are available in a wide range of offerings covering the aftermarket and today's needs for improved quality and tolerances. Individual bushings and kits are available, as well as semi-finished options that allow you to machine bore for proper fit and centerline accuracy. Dura-Bond transmission bushings feature seamless construction that makes installation easy, eliminating breakage and bushing surface interruptions. * Full round Babbitt bushings: Tight tolerances, no walking, no possible split when installing, wall tolerance of .0005 and O.D. tolerance of .001 * Bronze bushings: Hard and strong, long lifespans; resist shock, impact, wear, and corrosion * Coated bushings: Retains transmission engine oil on the surface, even under extreme heat and pressure, providing secondary lubrication in the event of momentary oil starvation * Dry film lubricant coating: Provides solid lubrication of parts subject to torque or contact stresses for maximum fatigue life, improved surface properties, excellent load carrying capacity, and intermittent dry lubrication * Bushings with indents: Provide lubricant reservoirs for better oil retention that allows for excellent and prolonged service * Bushing kits are constructed with all the necessary bushings to complete a rebuild and are manufactured to precise OEM dimensions for an exact fit
( 10 )
$6.99
—
$85.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 212 )
$59.99
—
$123.99
ATP automatic transmission control solenoids are designed to replace faulty factory units and keep your transmission shifting smoothly. They're available in a variety of configurations for dozens of transmission types—on thousands of vehicle applications. These replacement solenoids meet or exceed OEM specifications.
( 1 )
$77.99
—
$166.99
SKF Bearings wheel bearing and hub assemblies are premium parts produced using high-quality steel and surface finishes, premium seals, factory-grade sensors, precision manufacturing techniques, and strict assembly tolerances. They're 100 percent tested to the actual OE specifications for fit, form and function. SKF bearing assemblies are easy to install, pre-adjusted, and lubricated for life. Plus, SKF offers the broadest range of hub bearings and kits in the aftermarket. SKF wheel bearing and hub assemblies provide everything you need in one box to complete your install. Depending on the model selected, your kit may include bearing and flange, axle nut, circlip, O-ring, seal, or other parts. Order the assembly designed for fitment on your vehicle application.
( 62 )
$39.99
—
$77.99
USA Standard manual transmission bearing kits include top-quality components to rebuild the bearings in your transmission. They're great for replacing worn out or broken items--even just giving your transmission a quick update, while you're down in the off-season.
( 9 )
$276.99
Centric C-Tek standard wheel bearing and hub assemblies has the widest range of bearing and assemblies on the market for all types of vehicles for exact fit and function. With these high-quality replacement hubs, ensure your ride has OE-levels of reliability, durability, and performance. Get your vehicle back on the road with Centric C-Tek standard wheel bearing and hub assemblies.
( 6 )
$55.99
—
$76.99
Timken wheel bearings are designed to be exact replacements for your OEM wheel bearings. Their steel roller bearing configuration allows for maximum performance without sacrificing durability. Available for a variety of passenger cars, trucks, and SUVs, these Timken wheel bearings will get you back on the road in no time.
( 245 )
$48.99
SKF wheel bearings are engineered and manufactured to the highest quality standards using only premium-grade steel for outstanding durability and performance. Their superior seal design helps to keep out dirt and contaminants, and retains lubrication in the bearing. These wheel bearings are also able to boost reliability under heavy loads and misaligned conditions, which makes them an ideal solution for many wheel end applications. SKF Bearings wheel bearing features and benefits include: * Reduces friction and increases load-carrying capabilities * Application specific per year/make/model of vehicle
( 5 )
$24.99
—
$42.99
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 80 )
$67.99
—
$154.99
FAG USA wheel bearings are compact bearing units, manufactured with a defined, preset bearing clearance. The results are rugged design, as well as for-life (no maintenance) lubrication and sealing. They feature angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearings—available for hundreds of applications.
( 4 )
$21.99
—
$45.99
Ford Genuine Parts water neck gaskets and O-rings are designed to exact specifications as the factory parts on your vehicle for proper form, fit, and functionality. These genuine Ford replacement parts fit the same as the original factory part because they're made by the original equipment manufacturer. Water neck gaskets and O-rings in Ford engines serve to create a reliable seal, preventing coolant leaks and maintaining proper engine cooling. These seals ensure that the engine's cooling system operates effectively, preventing overheating and ensuring engine longevity. Get the genuine Ford replacement parts you need for your vehicle with the correct fit and top-notch performance you expect with Ford Genuine Parts.
Not Yet Reviewed
$5.99
National Bearing pilot bearings provide you with a job done right. Their quality bearings will replace your worn-out pilot bearings with an OE fit and confidence. National anti-friction bearings are precision-made to keep your transmission and clutch aligned for trouble-free operation. Bearings wear out--replace them with National pilot bearings.
( 6 )
$8.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
