Availability
Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.
( 29 )
$3,998.99
LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.
( 65 )
$739.99
—
$2,199.99
On Sale
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 53 )
$2,169.95
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 118 )
$1,332.95
—
$1,479.95
$1,199.66
—
$1,331.96
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 6 )
$3,734.95
On Sale
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 148 )
$3,375.95
$3,038.36
On Sale
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 118 )
$2,914.95
$2,623.46
Wilwood Classic Series Dynalite front brake kits deliver consistent stopping power for your classic cars. The forged Dynalite calipers combine technology and style to create stronger, more reliable clamping power that's proven to outperform existing styles of this popular caliper size. The complete packages also include solid surface or drilled and slotted rotors, premium brake pads, brackets, and all required hardware. Kits are available to accommodate the needs of daily driving and show cars. Order the model designed for your vehicle application.
( 256 )
$814.19
—
$1,055.64
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 182 )
$588.54
—
$654.54
Wilwood Dynalite one-piece rotor and hub front brake kits are your disc brake solution for your vintage ride. They are extremely versatile and can meet both the most demanding braking requirements of a street car and the most discriminating enthusiasts of a show car. Requiring no modification for installation, they provide plenty of clearance inside popular 15 in. wheels. Wilwood Dynalite one-piece brake kits come complete with rotors, calipers, a hub assembly, brackets, and all necessary hardware. If you're looking for a high-end performance brake kit, Wilwood has you covered.
( 18 )
$918.14
The Right Stuff 4-wheel disc conversion Show 'N Go kits offer the look of high-end brakes without the price! Besides having every part you need in one package without "braking" the bank, Show 'N Go kits kick up the bling with drilled and slotted rotors with zinc plating, your choice of red or black powdercoated calipers, and braided stainless steel hoses. The Right Stuff manufactures these kits from quality materials, including Timken bearings, to ensure ultimate performance and dependability. Forget the rust and go for the WOW factor with The Right Stuff Show 'N Go 4-wheel disc conversion kits.
( 22 )
$1,500.60
—
$1,575.30
LEED rear disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on with no cutting, drilling, or welding required. All components are new, high-quality, and precision-machined. The heavy-duty parking brake caliper will allow you to use your stock parking brake cables to actuate the parking brake.
( 18 )
$699.99
—
$952.99
On Sale
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,025.00
—
$1,575.00
$922.50
—
$1,417.50
Bring your old car or truck back to life with ATK High Performance Ford 351W 300 hp Stage 2 long block crate engines. These engines are built by hand by true craftsmen to ensure a strong-running, reliable engine for your daily driver or hot rod. These engines come ready for you to install your choice of finishing touches, so you can get back out on the road. ATK Ford 351W 300 hp Stage 2 long block crate engines include: * Handpicked, remanufactured blocks * OE #E7TE cast iron 1.77IN/1.46EX * Intake manifold * OE crank and rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.3:1 compression * Distributor * Valve covers * Timing cover * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 4 )
$4,349.99
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 262 )
$439.99
Are you tired of having brake fade or not enough stopping power? The Right Stuff designed rear disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability.
( 364 )
$401.95
—
$1,155.75
Upgrade your braking system with SSBC-USA's drum to disc brake conversion kits. You'll enjoy the rhythm of modern stopping power afforded you with their cast iron or aluminum calipers, brake pads, rotors, and all necessary brackets, hardware, and bolts. Order the SSBC-USA drum to disc brake conversion kits designed for fitment on your vehicle—front, rear, or both.
( 34 )
$757.00
—
$1,306.00
On Sale
Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM Air-Gap aluminum intake manifold that is available in a variety of finishes, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The Edelbrock Performer RPM Air-Gap intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try these Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 2 )
$1,106.95
$996.26
—
$1,149.95
Manufacturer Rebate
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 688 )
$720.95
—
$1,608.45
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 425 )
$359.99
On Sale
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
$1,519.16
—
$1,655.06
Bring your old car or truck back to life with ATK High Performance Ford 351W 300 hp Stage 1 long block crate engines. These engines are built by hand by true craftsmen to ensure a strong-running, reliable engine for your daily driver or hot rod. These engines come ready for you to install your choice of finishing touches, so you can get back out on the road. More product features, items, and specifications include: * Seasoned OE-style roller block (1987-95; 300 hp, 377 torque; 4.060 in. bore x 3.500 in. stroke) * OEM E7TE cast iron cylinder heads (1.77 in. intake/1.46 in. exhaust) * OE-style connecting rods and crankshaft (one-piece rear main seal; 28 oz. balance) * Hypereutectic pistons (9.1:1 compression ratio) * Hydraulic roller camshaft Camshaft ---220/224 Intake/Exhaust Duration at 0.050 in. Lift ---0.512 in. /0.512 in. Intake/Exhaust Valve Lift with Factory Rocker Arm Ratio ---112 degrees LSA (Lobe Separation Angle) * Moly-style piston rings * Timing cover * Oil pan (rear sump truck) and oil pump (Melling standard volume) * Stamped steel 1.6 ratio rocker arms
( 5 )
$3,841.99
Restore your classic's exterior appeal with Auto Metal Direct bumpers. They are made from heavy-gauge steel and are available with an OE-quality chrome finish or a custom primer (paintable) finish, allowing certain bumpers to be painted to match any desired color. All AMD bumpers feature, depending on application, correct holes for turn signals or back-up lamps, and installation is fast and easy, as they are designed as direct bolt-ons utilizing OE bumper brackets and hardware. All Auto Metal Direct bumpers are covered by a 5-year limited rust-through warranty.
( 309 )
$329.99
—
$374.99
Reduce body roll, understeer, and generally sloppy handling with Addco Performance anti-sway bar kits. The bar is made from high-carbon steel—and is hardened and stress-relieved to give your suspension superior support during sudden or sharp turns. Most kits include 12-gauge zinc chromate plated brackets with fully enclosed bushings, along with heat-treated end link bolts for added strength. Order the model designed for your vehicle application.
( 258 )
$219.88
—
$257.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
