Availability
Showing In Stock Items. Show All 38 Items.
On Sale
Stifflers Suspension transmission crossmembers are engineered to deliver quality, fit, finish, and functionality. At the core of these kits are Stifflers' unique single-tube crossmembers—adding strength and stiffness beyond that of OEM versions, while offering versatility without the excess weight. They also allow more exhaust clearance. To install, simply slide the mounting sleeves and reposition the spacers to cover your application. They work with OEM and aftermarket transmission mounts, and will maintain your current pinion angle. Stifflers Suspension transmission crossmembers include low-deflection polyurethane bushings in the mounts to dampen driveline vibrations and noise, but for racing applications they can be replaced by optional solid bushings. Order the crossmembers designed for fitment on your make and model.
( 76 )
$299.95
$269.96
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1002 )
$114.70
—
$156.45
Repair or restore your truck bed with Auto Metal Direct truck bed repair panels. They are application-specific. These EDP coated steel panels will fit in place of the stock panels.
( 59 )
$168.50
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 905 )
$275.99
Bigger tires need clearance—and adding that suspension lift is only half the battle. Spidertrax Off-Road 6061-T6 billet aluminum spacers are an easy way of spacing out front and rear axles that run OE wheels. This added spacing is necessary for keeping those larger tires from crashing into your frame rails and suspension links at full turn. Simply bolt-on like a wheel, and off to the trails you go. Each kit comes with two wheel spacers, 10 wheel studs (pre-installed), 10 lug nuts, and a package of thread locker. Each wheel spacer is anodized in blue, using a double anodizing process for twice the corrosion resistance. In addition, each wheel spacer is wheel and hub centric for a perfect fit. The spacers are available in a variety of thicknesses, center bore diameters, and thread sizes. Order the pair recommended for your vehicie.
( 10 )
$149.00
Auto Metal Direct truck bed cross sills hold your bed together. They are available for the front, rear, or center positions. The sills are manufactured from steel and are built to factory specifications for an easy installation. Restore or rebuild your truck bed with Metal Direct truck bed cross sills.
( 23 )
$111.99
Auto Metal Direct fender extensions repair your rusted-out factory originals. These quality reproductions are crafted from the proper gauge steel with all the right curves and bends to match the lines of your specific vehicle, and then are EDP coated for both corrosion resistance and lasting performance. Order the replacement fender extensions designed for your application.
( 16 )
$126.50
Bob Drake offers replacement fan hubs for a variety of Ford cars and trucks from the 1940s and '50s. Old, original hubs require regular service and oil to maintain lubrication and smooth operation. Neglecting your original hub is asking for trouble and could be seriously hard your fan and radiator. The Drake team took the old originals down to the bits for a thorough examination—then designed a worry-free, no-service-needed unit with modern sealed bearings and a top-grade aluminum body with a high-strength steel shaft for years of dependable service. There's no better unit to keep your fan spinning and flathead running. Fan-mounting hardware is included. Additional details: * Two sealed, deep-groove ball bearings eliminate the need to oil and keep the unit spinning for years of use and miles of road * Body made of tempered aluminum, effectively doubling the tensile and yield strength to combat the stress of harsh RPM load conditions * Hard-anodized sheave offers greater wear resistance against high friction in belt contact surfaces * Shaft made of superior steel with added alloying elements for torsional strength and increased resistance to fatigue * Beautiful turned-aluminum surface finish provides a high performance appearance for any flathead, or simply color with high-heat paint to complement your engine's unique styling
( 2 )
$209.99
Classic Performance offers gas tank sending units designed for use with their aluminum, zinc painted, and stainless steel bed-mounted relocation gas tanks. Classic also provides stock-type sending units for factory tanks with stock fuel gauges. Choose the model and options best suited for your application.
( 5 )
$128.99
Chassis Engineering motor mount kits are easy to install. Kits are offered in different groupings to use with your vehicle's original, Chassis Engineering, or other IFS system for strength and support. Motor mount kits may feature: * Bolt-on or weld-on frame adapters * Chassis Engineering engine mounts or side engine mounts * Thru-bolt cushion set * Hardware * Instructions
( 6 )
$199.00
Phoenix Machine offers a variety of interior components for vintage hot rods, including these gauge panels for 1930s, '40s, and '50s era Ford, Chevrolet, Lincoln, and Auburn models. The CNC-machined polished billet aluminum replacements are replica housings for many different 2 1/6 in. and 3 3/8 in. gauge clusters—including Classic Instruments and AutoMeter dials. Restore your classic with dash panel parts that capture the look, feel, and fit of the originals. Order the gauge panel recommended for your vehicle.
( 5 )
$134.99
Manufacturer Rebate
AutoMeter offers direct-fit dash gauge panels to fit dozens of specific vehicle applications. Whether you're updating the look of your original dash, or modifying it with new gauges, these replacement panels are the perfect way to start your project. They're available in thermoformed UV-protected ABS material or polished billet aluminum—in a variety of gauge hole configurations, depending on the application.
( 28 )
$132.99
Borgeson column saver kits include everything needed to maintain the stock steering column in your 1949-51 Ford when installing the power steering conversion box. Each kit contains a weld-on 3/4 in. DD shaft extension, lower mast jacket bushing, flat washers for shimming, and universal joint to connect to the Borgeson conversion box. Detailed instructions are included for shortening the factory column.
Not Yet Reviewed
$168.68
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$239.25
AutoLoc electric window crank switches allow you to operate your power windows with your vehicle's original window crank handle. This eliminates the need to mount aftermarket switches in your door panels. To operate your electric window, simply rotate the window crank up or down 15 degrees. To ensure safety, AutoLoc offers a positive dead lock stop and a return-to-center spring design, which creates a heavy-duty system that won't break or snap. These switches are made of billet aluminum and stainless steel fasteners, and will work with your factory window crank to give your vehicle a traditional look. They're available in multiple shaft styles—and are ideal for all vehicles, including hot rods, custom trucks, and cars!
( 12 )
$199.95
SafeTBoy 2-point retractable push button buckle lap belts offer safety every time your buckle up. These lap belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate, push button-style buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 22 )
$124.50
—
$195.50
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 552 )
$196.51
SafeTBoy 2-point push button buckle lap belts offer safety every time your buckle up. These lap belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-release buckle. SafeTBoy push button buckle belts are CAD-designed and engineered to fit comfortably across your waist. They provide the security and protection you need in your vehicle, while also being FMV-approved.
( 17 )
$139.95
—
$159.95
SafeTBoy 2-point airplane buckle lap belts offer safety every time your buckle up. These lap belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-release buckle. SafeTBoy aviation-style flip buckle belts are CAD-designed and engineered to fit comfortably across your waist. They provide the security and protection you need in your vehicle, while also being FMV-approved.
( 12 )
$124.50
—
$185.50
Clearance
Bishko factory OEM part lists and illustrations contain many diagrams to illustrate every single part in your automobile. When you cannot figure out the name of that little part you broke these diagrams can be invaluable for classic vehicle restorers! The chassis section includes comprehensive part information about the engine, electrical system, exhaust, transmission, brakes, suspension and more. The body section covers all body panels, doors, all window glass, and body moldings. Bishko factory OEM part lists and illustrations can help you put your project back together and get it on the road.
( 6 )
$132.99
Wilwood brake caliper mounting brackets are designed to keep your caliper in the right position for your aftermarket brake kit. They're made from quality aluminum or steel and feature a black finish to resist rust and corrosion. These replacement brackets are available for dozens of front and rear axle model applications. Order the individual bracket or set recommended for your brake kit part number.
( 41 )
$246.97
SafeTBoy 2-point retractable airplane buckle lap belts offer safety every time your buckle up. These lap belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate aviation-style flip buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 4 )
$195.50
—
$224.50
SafeTBoy 3-point retractable airplane buckle lap belts offer safety every time your buckle up. These modern over-the-shoulder belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate, aviation-style flip buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 13 )
$195.50
—
$259.50
Zirgo UltraMat heat and sound barrier mats reduce road noise while reflecting heat at the same time. The micro-ceramic and infrared reflectant resin compounds utilize the dynamics of thermal radiance in your favor to reflect infrared energy—keeping you warmer in the winter and cooler in the summer. The air gap deadens sound vibrations for a much more relaxing ride that's easier on the ears, too!
( 1 )
$119.95
—
$222.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
