Filters
These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.
( 1 )
$9,070.99
Tear up the asphalt with ATK High Performance Ford 460 525 hp Stage 1 long block crate engines. These engines are built from the ground up to perform exactly like a big block Ford should--awesome! ATK combines the highest quality components in a hand-built, rock-solid package that is capable of huge horsepower and a mountain of torque--perfect for getting you down the street or strip in jaw-dropping style. ATK Ford 460 525 hp Stage 1 crate engines include: * Handpicked, remanufactured blocks * Performance aluminum cylinder heads * OE cast crankshaft and OE connecting rods * Hypereutectic pistons * Hydraulic flat tappet camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
Not Yet Reviewed
$8,290.99
Roush 2011-14 5.0L F-150 Phase 2 supercharger kits are part of the TVS lineup that has raised the bar for supercharger performance and reliability. The Twin Vortices Series technology in their rotating assemblies deliver more power and better fuel economy in a smaller package for ultimate and uncompromising performance. These kits are designed to greatly enhance thermal efficiency, deliver higher volumetric capacity, enable higher operating speeds, create a smoother, more efficient flow of air into the engine, and have improved noise and vibration characteristics. Unlike turbocharged systems, the Phase 2 supercharger kits provide instant throttle response and can generate increased power through the engine's entire powerband, producing 210 hp and a 150 ft.-lb. gain over stock! So, if you're looking for serious power from your F-150, Roush has your answer. Roush 2011-14 5.0L F-150 Phase 2 supercharger kits include the following: * Roush R2300 2.3L TVS Supercharger * Fuel charging assembly with Roush designed upper and lower aluminum intake manifolds * Twin 60mm throttle body and matching throttle body spacer * High-flow cold air induction system featuring an injection-molded air box, blow-molding clean air tube, and high-flow, washable, premium air filter * Large 100mm MAF (Mass Air Flow) tube * High-efficiency intercooler system featuring dual-core low-temp radiator, degas bottle, high capacity air-to-water intercooler, and formed hoses with abrasion-resistant sleeves * 1st sheave FEAD system with heavy-duty tensioner for greater durability * Unique high-flow fuel rail with 47 lb. injectors * Roush flash voucher card * Zero heat range spark plugs * All required fasteners, wiring, brackets, hoses, and clamps
Not Yet Reviewed
$7,439.99
ATK High Performance Ford 502 515 hp Stage 3 long block crate engines use a smaller camshaft which will have a slightly smoother idle and has vacuum for power brakes. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK Ford 502 515 hp complete long block engines consist of: * Seasoned OE roller block * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic flat tappet camshaft * Performance cylinder heads * Stainless steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Water pump * Front damper * 780cfm carburetor * Spark plugs and wires
Not Yet Reviewed
$10,109.99
ATK High Performance Ford 502 515 hp Stage 2 long block crate engines use a smaller camshaft which will have a slightly smoother idle and has vacuum for power brakes. ATK Stage 2 or mid-dressed engines are designed for those that may have their own component parts already, and who also are interested in completing the finishing touches of the build themselves. Typically ATK Ford 502 515 hp Stage 2 long block engines consist of: * Seasoned OE roller block * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic flat tappet camshaft * Performance cylinder heads * Stainless steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Water pump * Front damper
Not Yet Reviewed
$8,798.99
Roush 2021-25 5.0L F-150 Phase 1 supercharger kits provide instant throttle response and can generate increased power through the engine's entire powerband. They utilize the 2.65L R2650 TVS supercharger, adding an additional 305 hp over stock, boosting power output to 705 hp and 635 lb.-ft. torque! As always, this power comes with peace of mind. This Roush Performance system is backed by their in-house 3-year/36,000-mile limited powertrain warranty when installed by a certified ASE technician. The roots-type positive displacement supercharger with twin 4-lobe rotors that are twisted 170 degrees offers a long list of benefits including, greatly enhanced thermal efficiency, higher volumetric capacity, higher operating speeds, a smoother, more efficient flow of air into the engine, and improved noise and vibration characteristics. Roush supercharger kits have completed hot development trips to validate cooling performance, AC performance, and towing capability. Over 900 hours of dyno engine durability and testing were completed to validate the supercharger and meet Roush Performance's engine durability requirements. Key features and benefits: * Billet aluminum viscous crankshaft damper developed by Roush engineers to reduce the increased torsional inputs needed to handle the increased power level, improving durability and longevity of supercharger * Uniquely developed spark plugs, optimized for forced induction application * 107 percent larger LTR surface area for increased cooling (2 times larger than the previous Roush low-temperature radiator) * Retains all factory driving modes * 3-year/36,000-mile Limited Powertrain Warranty included when installed by Ford dealer or an Automotive Service Excellence-certified technician * Includes all necessary installation hardware * Roush Performance calibration included (to be downloaded using the Roush RDT software) * Calibration optimized for 93 octane fuel (premium fuel recommended, compatible with 91 octane) * Roush calibration removes the cylinder deactivation feature (Variable Displacement Engine)
Not Yet Reviewed
$8,649.99
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$7,849.00
—
$8,509.00
Do you want more power under the hood of your Ford? Roush R2300 Roushcharger kits are just what you need. Featuring a TVS (Twin Vortices Series) supercharger, these kits create big performance with unsurpassed reliability. They also feature 4-lobe rotors and high-flow inlets and outlets for more volumetric capacity at higher rpm to give you serious ground-pounding power. Available in several configurations, depending on your power needs and application, Roush R2300 Roushcharger kits are sure to have your Mustang beating all of the competition and ruling the streets.
Not Yet Reviewed
$7,749.99
Do you need more power? Bolt on Edelbrock E-Force supercharger kits and give your stock F-150 a big boost of Edelbrock power. These systems are exclusively designed for each application and will allow you to increase your performance with impressive horsepower and torque. These 50-state legal systems feature an Eaton Gen VI supercharger rotating assembly seamlessly integrated into the intake manifold and uniquely oriented, allowing for amazing intake runner length and low-end torque. They're ideal for towing and off-road performance. Give your workhorse the boost it deserves--bolt on made-in-America Edelbrock E-Force supercharger kits.
( 5 )
$7,579.87
—
$9,116.87
Offering a 200 hp increase at the tires over stock, Edelbrock Twin-Force State 3 Turbo Systems will unleash the max potential of your truck. Edelbrock's engineers collaborated with Garrett on the design of all new turbos for the 3.5L EcoBoost trucks. These new direct bolt-in turbos incorporate the latest in turbocharger technology, offering a 54 percent increase in airflow over the factory turbos. A 60mm billet compressor wheel produces great improvements in compressor efficiency and flow. The 50mm Inconnel turbine wheel and larger .45 A/R stainless steel turbine housing result in a 52 percent increase in turbine flow. The 2.75 in. compressor inlets are 38 percent larger than the factory turbos, complementing Edelbrock's high-flow turbo inlet piping. The new turbochargers—combined with Edelbrock's larger intercooler, air inlet tubes, and high-flow air filter—offer huge increases in power potential for this application. To complement the improvements in airflow, the Stage 3 kits include an electronic booster for the fuel pump, enhancing fuel delivery and unlocking even more power potential. A flashing device (tuner) is included for flashing the Edelbrock Stage 3 calibration into the trucks PCM. The included calibration is specifically engineered for the components included in these kits—and takes advantage of this increased power potential, while keeping this upgrade to your truck EPA legal. Product notes: * New turbos with the latest turbocharger technology * Bolt-in installation with no fabrication required * EPA legal calibration and tuner (requires a PC) * OEM quality fit and finish * 200 hp gain at the wheels over stock
Not Yet Reviewed
$6,782.87
Bring your ride to life with ATK High Performance Ford 302 365 hp Stage 2 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Ford 302 365 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * Performance aluminum cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .512 int./.512 exh. * Cam duration @ 0.50- 220 int./224 exh. * 9.5:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 2 )
$5,866.99
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 3 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 3 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * Carburetion * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor, plug wires, and plugs * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 1 )
$5,359.99
Up the ante in your truck with the style and performance of BDS Suspension Fox 2.5 Elite coilover lift kits. Designed to improve stance, performance, and capability, kits include everything necessary to set your truck up right with clearance for big tires. Fox 2.5 Elite coilovers include a Dual Speed Compression (DSC) adjuster that allows easy high-speed and low-speed compression tuning for optimal performance in any terrain. Each kit will also include Fox performance rear shocks available in different options, heavy-duty control arms for increased suspension travel, and other matched components to take your truck to the next level. Select the kit designed for your truck.
Not Yet Reviewed
$5,490.65
—
$5,588.65
Roush 2018-19 5.0L F-150 Phase 1 supercharger kits are an industry-leading calibrated systems. Boosting performance to 650 hp for the 2018-19 Ford F-150 5.0L V8, the Roush 2.65L Phase 1 calibrated supercharger kit is part of the TVS (Twin Vortices Series) line of superchargers developed by Roush Performance, raising the bar for performance and reliability. Eaton's TVS technology rotating assembly delivers more power and better fuel economy in a highly-engineered package and is part of the same line that has been used and proven for years in Roush-built Ford Mustangs. The Roush R2650 TVS supercharger is a roots-type positive displacement supercharger that features twin 4-lobe rotors that are twisted 170 degrees. By comparison, the original Eaton supercharger rotating assembly featured three lobes twisted 60 degrees. The fourth lobe and the added twist, provides a long list of benefits including: greatly enhanced thermal efficiency, higher volumetric capacity, higher operating speeds, a smoother, more efficient flow of air into the engine, and improved noise and vibration characteristics. Unlike turbocharging, the Roush R2650 TVS supercharger provides instant throttle response and can generate increased power through the engine's entire power band. Features include: * Features R2650 rotating assembly along with newly-designed, high-flowing front inlet and outlet ports that greatly enhance thermal and volumetric efficiency across the entire rpm range * Custom, all-aluminum high efficiency intercooler and low temperature radiator along with high-capacity degas bottle provides substantial cooling technology * Increased durability with bigger bearings and thicker timing gears * Fuel charging assembly with Roush-designed upper and lower aluminum intake manifolds * Heavy-duty, first sheave FEAD system reduces stress on the engine * Roush Performance calibration included (to be downloaded using the Roush RDT software) * All necessary installation hardware
( 1 )
$8,199.99
ProCharger P-1SC-1 Stage II supercharger systems deliver larger power gains, coolest charge air temperatures, and the greatest reliability. Thanks to many years of forced induction engineering and innovation, ProCharger technology offers extremely low charge air temperatures, that also provides much better engine longevity by protecting your motor from detonation. The P-1SC-1 Stage II supercharger systems are complete kits with their most-advanced, quiet, and self-lubricating superchargers, highly effective and larger air-to-air intercoolers, handheld programmer, and other components that create an attractive, OEM-quality installation. Cooler air makes more power, and ProCharger P-1SC-1 Stage II intercooled systems supply lots of it to increase horsepower and performance.
( 1 )
$7,849.00
—
$8,699.00
Edelbrock offers Twin-Force Stage 2 Turbo System for a variety of applications—with or without a tuner included. Are you ready for the next level of performance? These systems include all of the great components of the State 1 Power Package, PLUS a pair of turbos incorporating the latest turbocharger technology from Garrett. * Model 158332 includes a tuner with the Stage 2 calibration—and offers a 150 RWHP gain over stock * Model 158330 does not include a tuner, which allows the installer to use an existing tuner to flash the appropriate calibration into multiple vehicles.
Not Yet Reviewed
$5,458.87
—
$6,192.87
BluePrint Engines 50 state legal long blocks are designed and manufactured to factory specs for specified vehicles. They're built using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make them better than the original—while still meeting the description of a "replacement" engine. From Ford Windsors to Chevy big and small blocks, these assembled crate engines are available for a wide range of vehicles spanning a half-century. Select the recommended fitment, specifications, and options needed for your swap.
Not Yet Reviewed
$5,749.00
RideTech offers suspension lowering systems to improve your vehicle's stance, handling, and ride quality. The kits include components that address your specific application, such as heavy-duty C-Notches, adjustable shock absorbers, brackets, coil springs, spindles, Grade 8 hardware, and more. The systems focus not only on lowering the vehicle, but also maintaining suspension geometry and alignment. Order the model recommended for your vehicle.
Not Yet Reviewed
$8,290.00
RideTech 1973-79 Ford complete bolt-on coilover suspension systems deliver the best handling for your classic truck—in a package that you can install yourself with hand tools and a little elbow grease. 1965-1979 FRONT SUSPENSION: * Removes bulky, heavy, poor handling twin I-beam suspension * Bolt-in cradle strengthens the front of the truck while providing structural mounts for front control arms; utilizes substantial "H" style design compared to other "I" style crossmembers. * Superb suspension geometry, built without compromise, vastly superior to adapted salvage yard "Crown-Vic suspension swaps" or "street rod style" / Mustang II front systems with optimized roll centers and anti-dive. * Delrin© bushings on upper and lower control arms provide smooth, squeak-free long life * Upper control arm cross-shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Utilizes RideTech tall "pin" spindle, which uses "AFX brake kits." Many brake kits (including Wilwood) are dual drilled for 5 x 4.5 in. or 5 x 4.75. lug pattern * Optional "Hub" spindles offer the same geometry improvements as the pin spindles but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Brake kit for the stock 5 x 5.5″ lug pattern with Ridetech pin spindle are available as well * Increased camber gain with tall spindle, 5-8 degrees caster for improved high-speed stability * 63.5 in. in front width (wheel mount surface to wheel mount surface); provides options for "traditional" offset wheel choices (4 in. narrower than Crown Vic) * Fits 14 in. and larger wheels. If using more than 4.5 in. of backspacing, 18 in. wheels are required * Motor mount "loops" connect cradle to frame rails to reinforce frame * Motor mount options for Modular Ford, Ford FE, and Small Block Ford, Chevy LS / Small Block / Big Block * Front sway bar measures 1.5 in. x .250 wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center to center bushing mounts for 1979-93 Mustang-style steering rack * Includes billet adjustable tie rods * Bump steer has been virtually eliminated * Adaptable to stock steering column using kit 12319505; includes column adapter, U-Joint and shaft. * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from the front of the truck Rear 4-LINK SUSPENSION: * Removes factory leaf spring suspension and bracketry * Complete parallel 4-link with panhard and C-notches * Works with coilover or Shockwave air suspension * Includes R-Joints on all links for smooth, bind-free, quiet operation and long life * Optimized roll center and anti-squat (60 percent anti-dive) for amazing traction and elimination of wheel hop * High-quality satin black powdercoat finish * Reduces rear weight by 50 lbs. * 1965-1972: No bed modification needed * 1973-1979: Slight bed support rail modification needed (not visible from the top side of the truck * Compatible with short bed and long bed trucks * Adjustable coilover suspension system
Not Yet Reviewed
$8,610.00
If you're looking for a supercharger your can customize to your needs, without including parts that you don't want, then Vortech kits are for you. Vortech's tuner centrifugal supercharger kits feature lightweight, investment-cast aluminum impellers that are heat-treated, CNC-machined, and high-speed balanced to ensure smooth operation. The gear cases and volutes are cast from premium A356 aluminum alloy, heat-treated, and then CNC-machined. Kits are available in both satin and polished finishes and come with a step-by-step, fully illustrated installation manual. Tuner kits do not include fuel and engine management hardware to allow for custom tuning. These kits do require custom (dyno) tuning by a specialist. Tuner kits are not smog legal. Most kits also include: * Matched supercharger * Heat-resistant silicone hose couplings * Premium-grade flex hose * Flow-tested cast aluminum and/or urethane air discharge tubing * Compressor bypass valve * OEM-style heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware Some kits will include a high-flow air intake system, and a reusable air filter element.
( 1 )
$7,644.99
—
$8,044.99
Roush 2015-17 5.0L F-150 Phase 2 supercharger kits are industry-leading calibrated systems that boost performance to 650 hp for the all-new 2015-17 Ford F-150 5.0L V8. The Roush 2.3L Phase 2 Calibrated Supercharger Systems are part of their TVS (Twin Vortices Series) line of superchargers, raising the bar for performance and reliability. Eaton's TVS technology rotating assemblies deliver more power and better fuel economy in a smaller package, and are part of the same line that has been used and proven for years in Roush-built Ford vehicles. Highlights and benefits include: * Most highly engineered supercharger systems for the 2015-17 F-150 on the market * 650 hp at 6,500 rpm and 585 lb.-ft. at 4,000 rpm * +265 hp (+69 percent) and +198 lb.-ft. (51percent) increase over stock (385 hp/387 lb.-ft.) * R2300 Supercharger featuring new TVS Technology--Twin Vortices Series features new four-lobe rotors with greatly enhanced thermal efficiency, enabling greater volumetric capacity at higher revolutions per minute (rpm) * All-new, high-capacity, low-restriction air filter and complete induction system * Large aluminum intercooler, low-temperature radiator with molded air duct, and high-capacity degas bottle * Roush-designed high-flow fuel injectors * Large 60mm dual-bore throttle body * Custom designed, heavy-duty first sheave FEAD system * Higher boost 75mm supercharger pulley * Roush Phase 2 calibration file delivered with exclusive Roush Diagnostic Tool (RDT)
( 2 )
$7,849.99
ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.
( 9 )
$7,299.00
—
$8,784.00
Your truck bed is the largest flat surface on the entire truck. Why treat it like the smallest? Utilizing only the highest grade of hardwoods available and the most advanced manufacturing technology, each plank in these undrilled BedWood kits are precision milled with your truck in mind. They come undrilled, allowing you to drill your own holes for custom application or hidden mounting holes. The chamfered edges and proprietary groove, coupled with the ease of installation, results in a finished appearance putting you one step closer to the winners circle. Available in multiple finishes as well as unfinished. Bed strips and hardware sold separately. Choose the model best suited for your truck.
Not Yet Reviewed
$5,100.00
—
$6,995.00
Bed Wood and Parts Bed-in-a-Box Deluxe kits include your unfinished wood choice, polished stainless steel bed strips, and matching hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box Deluxe kit designed to fit your application!
( 1 )
$5,150.00
—
$7,030.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
