Availability
Showing In Stock Items. Show All 74 Items.
These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.
( 1 )
$9,619.99
On Sale
Turbosmart Vee Port blow-off valves are an ideal choice if you're looking for high flow, small size, and value! These BOVs feature a unique, variable exhaust port system, providing for the superior venting of excess pressure. Turbosmart Vee Port blow-off valves are the simple, yet effective solution for your application.
( 6 )
$382.95
$317.85
Summit Racing™ OE replacement turbochargers are the best choice to replace your worn out, leaking, or failed original equipment units. With more and more vehicles coming turbocharged from the factory, the reality is that most turbos start leaking or the bearings wear out long before the life of the car or truck does and will need to be replaced. We are proud to offer these replacement turbos for various applications, choose the right one for your car or truck. Check out these features and benefits: * 100 percent brand new construction * Direct-fit left and right available * EM spec-cartridge and turbine wheel * OEM spec-housings on brand NEW tooling: tighter tolerances and better finish * Billet compressor wheel with revised and updated Aero: more torque over OEM and OEM replacements * OEM spec rotating assembly for hassle-free operation and longevity * OEM spec oil feed/drain and coolant inlet/outlet: plug-and-play with your existing oil and coolant lines * Increase horsepower, torque, and fuel efficiency over worn OEM turbochargers
( 3 )
$349.99
—
$649.99
On Sale
Fluidyne heat exchangers and intercoolers are designed to keep your turbocharged or supercharged engine working at optimum levels. A cooler intake charge means more power from your engine. These units are made from aluminum and precision-welded for maximum efficiency and durability. The coolers use mounting tabs welded to the outer case for a simple installation. Order the size or model recommended for your application.
( 9 )
$561.00
$448.80
On Sale
BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.
( 2 )
$2,040.95
$1,836.86
On Sale
Turbosmart Kompact dual port blow-off valves offer high performance, OEM fitment, versatility, and affordability—in other words, everything you need! These BOVs feature dual ports that vent into both the atmosphere and the air intake, reducing turbo lag and eliminating cavitation. Turbosmart Kompact dual port blow-off valves are designed to be bolt-on replacements for plastic factory Bosch or Denso units. They use sequential timing to allow for quieter operation during normal driving, while still providing the benefits of a vent-to-atmosphere type BOV under race conditions. They are easily converted into full atmospheric or full bypass units by using the included port blanking plug.
( 28 )
$207.95
$170.52
Edelbrock offers Twin-Force Stage 2 Turbo System for a variety of applications—with or without a tuner included. Are you ready for the next level of performance? These systems include all of the great components of the State 1 Power Package, PLUS a pair of turbos incorporating the latest turbocharger technology from Garrett. * Model 158332 includes a tuner with the Stage 2 calibration—and offers a 150 RWHP gain over stock * Model 158330 does not include a tuner, which allows the installer to use an existing tuner to flash the appropriate calibration into multiple vehicles.
Not Yet Reviewed
$5,731.95
—
$6,502.95
On Sale
AMS Performance turbine housing adapters let your turbos breathe more freely because more flow equals more power! These parts feature a clean-sheet design—not reworked OEM engineering. The smooth transitions help the hot exhaust gases to pass easily out of the turbo, reducing back pressure and allow for faster spool times. They install easily between the turbo and the downpipes. Engineered to be the best performing components you can buy, AMS Performance turbine housing adaptors add style and performance integrity to any ride!
( 4 )
$159.95
$135.96
Summit Racing™ turbo coolant line kits provide a quality engineered solution in one box to replace or upgrade your coolant lines when replacing your turbocharger.
Not Yet Reviewed
$249.99
On Sale
Turbosmart Plumb Back EM upgraded diverter valves combine the SEMA Award-winning EM Vehicle Integration technology and tried-and-tested BOV5 architecture. Featuring a return hose for high-flowing plumb back performance and a direct-fit billet aluminum valve utilizing a 38mm / 1.5 in. positive seal piston, these valves will provide enough flow even for seriously modified vehicles while happily working on the factory and mildly tuned cars. The Turbosmart Patented EM System allows full integration with the factory electronics of later model vehicles. Some car manufacturers have taken to fitting electronic solenoid-actuated diverter valves—and have done this to use the valve for several other purposes outside the traditional use, such as when lifting the throttle, etc. EM Technology allows full integration with these systems and the motorsport-proven reliability and performance of a mechanical, piston-based valve. Additional details: * EM 'Electro-Mechanical full OE integration * True plug-and-play recirculating upgrade * 100 percent recirculating for OE integration * High-flow BOV5 design for high boost and upgraded power levels * 38mm /1.5 in. coated aluminum positive seal piston * Boost-balance valve technology * Black anodized for a low-profile, high-quality appearance * Black silicon hose return pipe
( 1 )
$382.95
$306.36
On Sale
Turbosmart Kompact recirculation blow-off valves feature a plumb back system that recirculates all excess pressure back into the intake system. They offer more versatility, OEM fitment, better structural integrity than a stock BOV, and superior airflow for better performance. These Turbosmart Kompact recirculation blow-off valves are the perfect way for enthusiasts to gain all of the benefits of a quality BOV without drawing unwanted attention.
( 5 )
$195.95
$156.76
Go Fast Bits VTAs are a performance blow-off valve solution for a wide range of foreign and domestic cars and trucks with an electronic factory diverter valve. If you want sound with your performance (or performance with your sound!), these VTAs offer just that! By combining the proven performance benefits of GFB's ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions. The VTA shares the successful DV+ design philosophy: "Keep what works, replace what doesn't." This means Go Fast Bits retained ECU control and the solenoid from the factory diverter to ensure the fastest possible response time—without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism; this is the part GFB has replaced. The VTA features CNC-machined billet components that last a lifetime, and the valve operation method has been updated for better performance. The factory diverter valve can only operate in two states: open or closed. When it opens fully at low boost or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition. GFB pioneered the use of "pilot operation" in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve. It's this design philosophy that makes the VTA not only the best performing blow-off valve solution, but also the best value on the market. Order the VTA Performance blow-off valve model recommended for your vehicle. Key features: * TMS Technology for faster boost recovery on gear shift and during throttle modulation * Improved boost holding ability * Atmosphere venting for blow-off sound * Retains ECU control * Simple, direct bolt-on kits include everything you need to install
( 5 )
$269.10
Wagner Tuning EVO II Competition intercoolers outfit your vehicle with a better design, more airflow, and increased performance. The EVO II units provide additional frontal area and volume compared to their first generation models. Wagner Tuning enlarged the frontal area and raised the efficiency even more to work flawlessly with the improved end tank designs. The result is unrestricted flow and increased charge cooling properties. Competition intercoolers are engineered with some of the highest quality and lowest weight tube and fin cores available. The inside turbulators and free-form cast aluminum end tanks are optimized by CAD for the best possible internal airflow. Wagner Tuning EVO II Competition intercoolers are finished with an anti-corrosion protective coating with perfect heat-dissipating properties. Order the model for your application.
Not Yet Reviewed
$950.00
AFCO Racing heat exchangers are designed to replace your factory heat exchanger and provide more efficient intake cooling. They are made from aluminum, TIG-welded, and come in a natural finish, and feature enhanced fin technology for greater airflow. These heat exchangers are direct bolt-in applications that require no modifications to facilitate an easy installation.
( 4 )
$589.99
—
$854.99
Summit Racing™ turbo installation hardware kits provide the hard-to-find factory-style gaskets, studs, and hardware you need when replacing your factory turbos. Select the kit needed for your application.
Not Yet Reviewed
$229.99
On Sale
Roush Performance serpentine drive belts feature high modulus glass fiber non-stretch cords, which deliver precise length stability. They run quieter and are more affordable than chain drives. These replacement belts contain self-lubricating fabric and have exceptional resistance to abrasion. Select the belt designed for fitment with your vehicle and engine application.
( 1 )
$96.99
$87.29
On Sale
Get the most out of your diesel truck performance with aFe BladeRunner intercooler pipes. The connecting arms are fully mandrel-bent stainless steel or aluminum tubing that will outflow factory pipes, giving you more power and fuel efficiency. The intercooler pipes free-flowing design aids in decreasing EGTs to help protect your motor from power-robbing heat. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system. The kits come complete with the hardware needed for installation, and a powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes!
( 18 )
$352.80
—
$819.00
$317.52
—
$737.10
Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.
Not Yet Reviewed
$790.00
—
$990.00
CSF intercoolers are a complete, full line of intercoolers--with coverage ranging from Audi to Volvo. Several different styles are available, including plastic-aluminum and all-aluminum, with standard tube and fin cores as well as heavy-duty bar and plate cores. CSF OE-replacement intercoolers provide a drop-in fit requiring no modifications. All CSF intercoolers are built to OE specifications, and incorporate the same high-quality and value that CSF has been known for and has represented in the industry for decades.
( 18 )
$185.99
—
$225.99
Summit Bucks
Edelbrock E-Force Mustang Stage 1 Street Legal supercharger kits transform your Mustang into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 degrees of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. These Mustang supercharger systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.
( 2 )
$8,459.95
—
$9,122.95
On Sale
Do you want more power under the hood of your Ford? Roush R2300 Roushcharger kits are just what you need. Featuring a TVS (Twin Vortices Series) supercharger, these kits create big performance with unsurpassed reliability. They also feature 4-lobe rotors and high-flow inlets and outlets for more volumetric capacity at higher rpm to give you serious ground-pounding power. Available in several configurations, depending on your power needs and application, Roush R2300 Roushcharger kits are sure to have your Mustang beating all of the competition and ruling the streets.
Not Yet Reviewed
$7,749.99
$7,052.49
If you hear excessive whistling noises or believe your stock turbo is damaged, you need Standard Motor stock replacement new turbochargers. These 100 percent new units are designed for a direct-fit installation into specific gasoline or diesel applications. They come ready to roll with high-grade materials and complete gasket kits to ease installation.
( 1 )
$683.99
—
$943.99
ZZPerformance offers supercharger bypass valves for a wide range of applications—including many Buick, Pontiac, Chevrolet, Ford, and Nissan cars and trucks from the mid-1990s and up. These new replacement valves are designed for M90 blowers. Two versions are available: * The GM M90 style with the solenoid bracket * The no solenoid provision for Ford M90 superchargers and other applications Both bypass valves function the same; just make sure to choose the option that fits your application.
Not Yet Reviewed
$69.99
Wagner Tuning EVO competition intercoolers offer more core size, more efficiency, and more performance. Wagner engineers also improved the end tank design to remove any OEM bottlenecks, resulting in increased flow ratings and charge cooling properties. EVO competition intercoolers are constructed of the highest quality, lightweight, low-restriction tube and fin cores combined with cast aluminum end tanks and are optimized by CAD. The intercoolers design was improved further with flow analyses and simulations. Wagner EVO intercoolers are also treated with an anti-corrosion protective coating that features perfect thermal heat-dissipating characteristics and offer easy fitment and optimal cooling with clearly more power. Order the EVO competition intercooler for your application.
Not Yet Reviewed
$750.00
—
$990.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
