Availability
Showing In Stock Items. Show All 26 Items.
RideTech offers suspension lowering systems to improve your vehicle's stance, handling, and ride quality. The kits include components that address your specific application, such as heavy-duty C-Notches, adjustable shock absorbers, brackets, coil springs, spindles, Grade 8 hardware, and more. The systems focus not only on lowering the vehicle, but also maintaining suspension geometry and alignment. Order the model recommended for your vehicle.
Not Yet Reviewed
$8,290.00
RideTech 1965-72 Ford complete bolt-on coilover suspension systems deliver the best handling for your classic truck—in a package that you can install yourself with hand tools and a little elbow grease. 1965-1979 FRONT SUSPENSION: * Removes bulky, heavy, poor handling twin I-beam suspension * Bolt-in cradle strengthens the front of the truck while providing structural mounts for front control arms; utilizes substantial "H" style design compared to other "I" style crossmembers. * Superb suspension geometry, built without compromise, vastly superior to adapted salvage yard "Crown-Vic suspension swaps" or "street rod style" / Mustang II front systems with optimized roll centers and anti-dive. * Delrin© bushings on upper and lower control arms provide smooth, squeak-free long life * Upper control arm cross-shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Utilizes RideTech tall "pin" spindle, which uses "AFX brake kits." Many brake kits (including Wilwood) are dual drilled for 5 x 4.5 in. or 5 x 4.75. lug pattern * Optional "Hub" spindles offer the same geometry improvements as the pin spindles but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Brake kit for the stock 5 x 5.5″ lug pattern with Ridetech pin spindle are available as well * Increased camber gain with tall spindle, 5-8 degrees caster for improved high-speed stability * 63.5 in. in front width (wheel mount surface to wheel mount surface); provides options for "traditional" offset wheel choices (4 in. narrower than Crown Vic) * Fits 14 in. and larger wheels. If using more than 4.5 in. of backspacing, 18 in. wheels are required * Motor mount "loops" connect cradle to frame rails to reinforce frame * Motor mount options for Modular Ford, Ford FE, and Small Block Ford, Chevy LS / Small Block / Big Block * Front sway bar measures 1.5 in. x .250 wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center to center bushing mounts for 1979-93 Mustang-style steering rack * Includes billet adjustable tie rods * Bump steer has been virtually eliminated * Adaptable to stock steering column using kit 12319505; includes column adapter, U-Joint and shaft. * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from the front of the truck Rear 4-LINK SUSPENSION: * Removes factory leaf spring suspension and bracketry * Complete parallel 4-link with panhard and C-notches * Works with coilover or Shockwave air suspension * Includes R-Joints on all links for smooth, bind-free, quiet operation and long life * Optimized roll center and anti-squat (60 percent anti-dive) for amazing traction and elimination of wheel hop * High-quality satin black powdercoat finish * Reduces rear weight by 50 lbs. * 1965-1972: No bed modification needed * 1973-1979: Slight bed support rail modification needed (not visible from the top side of the truck * Compatible with short bed and long bed trucks * Adjustable coilover suspension system
Not Yet Reviewed
$8,610.00
RideTech 1965-72 Ford air suspension systems enable you to achieve that ultra-low show stance while providing excellent ride quality and handling. The older classic Ford trucks were designed and built for a different era—back when the speed limit was 55 and trucks were meant to work hard. While the original twin I-beam front suspension was built "Ford tough" it wasn't exactly built to carve corners. So, RideTech set out to design the best handling classic Ford suspension for the 1965-72 Ford trucks—and build it in a package that you can install yourself with hand tools and a little elbow grease. These RideTech Ford air suspension packages feature matched components to upgrade the performance of your old Ford for ride quality and handling with adjustable vehicle height. Complete systems vary by application and use and may include tubular a-arms, 4-links, coilovers, Shockwaves, air springs, shock absorbers, coil springs, leaf springs, sway bars, bushings, ball joints and more. Choose the Ford air suspension system recommended for your year/make/model.
Not Yet Reviewed
$8,480.00
—
$8,800.00
Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs
( 1 )
$5,420.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
