Availability
Showing In Stock Items. Show All 133 Items.
Don't ignore the signs! A clunking and clanging noise, intense vibrations at accelerated speeds ... it could be an indication of a failing U-joint. If that's the diagnosis, here is the solution--replace it with one of our Summit Racing Equipment® U-joints. These drivetrain components are engineered from quality materials to meet or exceed OE standards, and are available in applications with forged and case-hardened alloy steel crosses for lasting service life. The bearing cups are case-hardened for strength and durability, and superior seals help keep contaminants out and allow for proper lubrication. Plus, a grease fitting in the cross body allows for easy maintenance. Select your part application and install it to avoid complete U-joint failure--problem solved!
( 32 )
$14.99
Genuine Ford Motorcraft wheel bearings will keep dust, dirt, and other contaminants out of your wheels. They will retain the bearing lubricant and meet OE specifications for durability and reliability under extreme conditions, with minimal friction, for smooth, quiet wheel rotation.
Not Yet Reviewed
$75.99
ACDelco Gold universal joints help transmit power from the transmission to the rear or front differential through the driveshaft or prop shaft. They allow for vertical movement of the shaft during its rotation. ACDelco Gold universal joints are premium aftermarket replacement components, manufactured to meet or exceed your expectations for fit and performance. Order the model recommended for your vehicle.
( 1 )
$24.99
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 50 )
$118.99
—
$148.99
Summit Bucks
These Moog U-Joint fasteners are designed to hold U-joints in place and keep them from falling off. They are manufactured from high-quality materials for maximum durability on the road or trail. The fasteners are available in different configurations for specific U-joint models, so you can choose what's best for your application.
( 39 )
$9.99
Support your gears with National pinion bearings. They are precision-made from quality materials to keep your gear aligned and running smooth. Replace worn bearings with National Bearing anti-friction pinion bearings.
( 1 )
$13.99
Dorman CV joint boots protect your CV joints from destructive dirt and moisture. A common cause of CV joint failure is cracks in the CV boot. When the boot is cracked, it allows dirt and grit to mix in with the grease and wear down the parts of the joint. CV boots should be replaced as soon as cracking is visible in their rubber folds. Pick up one of these Dorman CV joint boots to eliminate the problem.
( 5 )
$21.99
—
$31.99
Motorcraft wheel bearing and hub assemblies are available for countless applications. The high-quality steel hubs are engineered to provide years of durable performance. These aftermarket and OEM replacements are recommended by Ford Motor Company. Find the assembly designed to fit your vehicle specs.
( 6 )
$132.99
—
$136.99
Timken clutch pilot bearings keep the transfer of power efficient! Leaders in friction management, Timken starts with high-quality steel and ends with precision-machined pilot bearings that will provide anti-friction alignment between your transmission and clutch. Timken puts you in motion and makes you good to go with their well-made, cost-effective pilot bearings.
( 32 )
$10.99
National Bearing oil seals, often called grease, fluid, or dirt seals, are vital components used to prevent leaks around valves, shafts, and other moveable parts on cars, trucks, and industrial equipment. These high-quality oil seals are accurately manufactured to OE specifications and come in a wide range of applications. So, for smart, cost-effective sealing solutions, use National Bearing.
( 6 )
$13.99
Cardone remanufactured CV drive axles have neoprene boots ensuring excellent ozone resistance, which eliminates cracking, a leading cause of boot failure. Boot clamps are pneumatically crimped creating a perfect seal between the boot and housing. High-quality grease withstands high-temperature and pressure extremes, which extends joint life. High-tech grinding machines maintain the original design of the outer housing, race, and cage to guarantee reliable performance. Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles. Their threads are chased to ensure proper fit when the axle nut is installed.
( 26 )
$69.99
—
$117.99
Summit Bucks
Moog wheel bearing and hub assemblies feature problem-solving innovations and include application-specific design enhancements. They are engineered to overcome problems and deliver smooth, reliable performance. Features and benefits of Moog wheel bearing and hub assemblies include: * Roll-form design ensures consistent and optimal preload * Precision-matched components; rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration * Moog abrasion-resistant ABS cord manufactured from a blended material that offers increased abrasion resistance and better protection from adverse conditions * For applications that require it, ABS molded shield and socket connections for even greater defense against contamination * Premium quad-lip seal design ensures maximum protection from contamination * Wheel studs have a protective coating that helps prevent rust and corrosion, enabling easier removal and proper torqueing of wheel nuts
( 700 )
$89.99
Clearance
BCA Bearings by NTN wheel bearings will keep your wheels turning—quietly. They are precision-engineered with high-quality materials to deliver optimal performance and durability. BCA Bearings by NTN wheel bearings are available for a wide range of applications, so they are sure to have the right fit for your application.
( 3 )
$40.99
$29.50
Major components, such as the ring and pinion, play a starring role in your gear train's operation. However, they couldn't do their jobs properly without a supporting cast, including these differential crush sleeves from Yukon Gear & Axle. The durable steel collars prevent your pinion bearing from being preloaded too tightly—and help prevent the pinion nut from loosening. When the time comes to service your differential, choose Yukon Gear & Axle crush sleeves, available in configurations for dozens of specific axle applications.
( 11 )
$11.99
Spicer Drivetrain Products pinion bearings are trusted by the largest car manufacturers on earth and for good reason. They're precisely engineered for each application, made from very durable materials, and readily available when replacements are needed. The bearings are offered in a variety of sizes for use on specific axle (and position) applications. Restore your differential to optimum performance levels with quality pinion bearings from Spicer Drivetrain.
Not Yet Reviewed
$25.99
Replace your worn-out clutch master cylinder with affordable Sachs Stock Replacement parts. The clutch master cylinder, or clutch pump, is the main type of hydraulic clutch operating system. This simple hydraulic principle is used to transmit the required force from the clutch pedal to the slave cylinder. As part of the clutch system, this part is connected on one side to the clutch pedal via a lever mechanism. The other end is connected via a hose to the slave cylinder, which moves the clutch. These vital components allow the driver to manipulate the clutch pedal correctly, always with less effort than would be needed if this part were not present in the vehicle. Sachs clutch master cylinders are built to OEM specifications to offer the same fit, form, and function as the factory OE part to help you restore your vehicle back to its proper operation. Select the Sachs Stock Replacement clutch master cylinder for your application.
( 1 )
$94.99
Ford Genuine Parts water neck gaskets and O-rings are designed to exact specifications as the factory parts on your vehicle for proper form, fit, and functionality. These genuine Ford replacement parts fit the same as the original factory part because they're made by the original equipment manufacturer. Water neck gaskets and O-rings in Ford engines serve to create a reliable seal, preventing coolant leaks and maintaining proper engine cooling. These seals ensure that the engine's cooling system operates effectively, preventing overheating and ensuring engine longevity. Get the genuine Ford replacement parts you need for your vehicle with the correct fit and top-notch performance you expect with Ford Genuine Parts.
Not Yet Reviewed
$6.99
Premium parts without the premium price—GMB wheel bearings should be your replacement choice. You can do the work yourself, but dealership prices will blow your budget. GMB parts deliver the form, fit, and function, as well as quality standards to meet and exceed your OE expectations. Their bearings are precision-engineered with the right mix of ruggedness, temperature endurance, and materials to afford smooth, long-lasting operation on your vehicle. GMB wheel bearings provide quality and a perfect fit for your vehicle and your wallet. Order the model recommended for your application.
Not Yet Reviewed
$51.99
Premium parts without the premium price--GMB wheel bearing and hub assemblies should be your replacement choice. You can do the work yourself, but dealership prices will blow your budget. GMB parts deliver the form, fit, and function, as well as quality standards to meet and exceed your OE expectations. Their assemblies are precision-engineered with the right mix of ruggedness, temperature endurance, and materials to afford smooth, long-lasting operation on your vehicle. They are factory-sealed to eliminate contamination. GMB wheel bearing and hub assemblies provide quality and a perfect fit for your vehicle and your wallet.
( 25 )
$58.99
—
$136.99
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 151 )
$16.99
—
$29.99
Summit Bucks
Moog Super Strength U-joints are precision-manufactured to exacting standards. They have forged and case-hardened alloy steel crosses and heat-treated needle bearings. Cold-formed radial bearing cups provide 360 degree lubrication distribution, while superior-quality seals and a grease fitting make for easy maintenance. In addition, the Super Strength U-joints have an exclusive microshield coating to protect against rust and corrosion. They are available in greasable and non-greasable styles for more than a dozen positions--in universal and vehicle-specific applications.
( 225 )
$17.99
Flexplates are important connections between your engine and torque converter, and are relatively inexpensive parts to change out when they demonstrate signs of wear. These one- or 2-piece Pioneer replacement flexplates are machined from durable steel for long-lasting performance. They're available in a wide variety of configurations for fitment with engine and transmission applications spanning six decades.
( 72 )
$64.99
—
$68.99
Summit Bucks
Moog Premium U-joints are precision-manufactured to exacting standards. They have forged and case-hardened alloy steel crosses and heat-treated needle bearings. Cold-formed radial bearing cups provide 360 degree lubrication distribution, while superior-quality seals, and a grease fitting in the cross body make for easy maintenance. The U-joints are available for nearly two dozen positions, in universal and vehicle-specific applications.
( 210 )
$12.99
FAG USA pilot bearings offer high-quality for your project. They are produced worldwide for a wide range of applications to keep the input shaft centered and drivetrain vibrations down. Choose the one you need for your vehicle.
Not Yet Reviewed
$5.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
