Availability
Showing In Stock Items. Show All 34 Items.
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$112.40
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 344 )
$118.99
—
$140.99
Dayco's long tradition of toothed belt power transmission systems and its in-depth knowledge of functional requirements, as well as its know-how in terms of quality, testing and reliability, are also now successfully applied to chain kits. In designing the new Dayco timing chain kits, a system logic was followed to ensure that all of the elements required for replacement—that is: the chain, hydraulic tensioner, sprockets, and guides—are included with every kit. Additionally, Dayco has guaranteed that all elements of each timing chain kit comply with the technical requirements of every single component. This provides maximum functionality, silence in operation, and promotes longer transmission life. The kits are available for countless vehicles; order the replacement timing chain recommended for your application. Advantages of the Dayco timing chain kit range include: * Synergic design of each entire kit (chain, guides, tensioner, gears, and seals) * High robustness and proven reliability on test benches and in-vehicle fleet testing * High-strength steel, precision-machined tensioners to ensure reduced internal clearances for optimum control and management of the timing chain tension * High-strength plastic guides manufactured with glass fibers for additional strength * High-strength molding steel or sintered steel manufactured gears with specific heat treatments applied for the hardening of the toothed area surfaces
( 3 )
$237.99
Hamburger's Performance oil filter bypass adapters make it easy to relocate your oil filter to a more accessible location, such as in the engine compartment, to make filter changes quickly and easily. Get double filtration to keep your oil cleaner and add an extra quart of oil capacity with a dual filter system. Additional oil capacity helps to cool internal engine parts, providing maximum engine protection.
( 13 )
$116.99
—
$141.99
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 188 )
$164.99
The variable valve timing sprocket is key to ensuring an engine's performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.
( 9 )
$133.99
—
$157.95
Standard Motor engine variable timing sprockets will restore your vehicle's drivability. Designed to match OE performance, these SMP units are precision-machined to ensure accurate variable valve timing and correct rough idle. And, once installed, the cam phasers can help to reduce emissions and improve vehicle efficiency. Choose quality parts to get the job done right the first time; choose Standard Motor engine variable timing sprockets.
( 8 )
$120.99
—
$166.99
Cloyes timing chain and gear sets provide the ultimate in timing reliability. They include a steel crankshaft gear and either an aluminum or ductile iron camshaft gear, along with a chain. Cloyes timing chain and gear sets have been precision-hobbed and crown-shaved to provide an accurate gear-to-gear mesh with no wear and tear on the gears.
( 6 )
$235.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 66 )
$114.99
—
$136.99
For high load applications, King SM-Series rod bearings contain the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. King SM-Series connecting rod bearings feature a traditional steel-backing, plus an aluminum bonding layer and the aluminum bearing alloy. These replacement sets are available for a variety of vehicle applications.
( 1 )
$140.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 52 )
$100.99
—
$180.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 133 )
$106.99
—
$149.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$234.99
Oil is the lifeblood of your engine, so it deserves a superior reservoir--such as one of these Dorman oil pans. They are constructed of painted stamped steel or natural finish aluminum for long-lasting durability. Each replacement unit is manufactured to OEM specs, ensuring a precise fit that provides an additional layer of efficiency and convenience without any modifications. Leaks, rust, damage, or an engine rebuild are all good reasons to install a new oil pan. Nearly 200 models are available, with various configurations, capacities, and sump styles. Find the Dorman oil pan to fit your car, truck, van, or SUV--and keep the vital lubricants flowing. Oil drain plugs and drain plug gaskets are sold separately.
( 229 )
$102.99
—
$167.99
Melling replacement timing chains are available in several styles—single or double roller, link belt, or non-roller—for fitment on countless year/make/model vehicles. A key link in your engine, timing chains synchronize and transfer energy from the crankshaft to the camshaft, controlling when the intake and exhaust valves open. These solid-bushing chains offer a true bearing surface that rolls with the sprockets, eliminating chain stretch. Order the replacement designed for your specific application.
( 3 )
$109.99
Ford Genuine Parts camshaft sprockets are designed to exact specifications as the factory part on your Ford vehicle for proper form, fit, and functionality. These genuine replacement parts fit the same as the original factory part because they're made by the original equipment manufacturer. Camshaft sprockets ensure that the camshaft operates in sync with the crankshaft, allowing for optimal valve timing. Replacing a worn cam sprocket is a crucial aspect of maintaining your engine's performance. Get the parts you need with the correct fit and performance you expect with Ford Genuine Parts.
Not Yet Reviewed
$177.99
J&L Oil Separator Co.'s new oil separators are the perfect addition to your high performance machine. They're everything you're missing to filter out oil vapors that could damage your internal engine components over time. The 3 oz. tanks nearly triple their original design in size—and feature a thick billet construction that's available in a clear or stealthy black anodized finish. Their new multi-stage filtration system collects the finest of vapors and drops them into an easily removable bottom. Clean air is then able to pass through, saving components such as your intake tube and manifold runners. J&L Oil Separator Co. oil separators include the fittings you'll need to make installation a breeze. Order the model tailored for your vehicle.
( 365 )
$169.00
Over time, your stock balancer can wear out, causing vibration and possible major engine damage. Replace your old damper with one of these Dorman harmonic balancers. Part of their OE Solutions line, these balancers bolt right up to the stock location for a perfect fit.
( 173 )
$176.99
Manley Pro Series I-Beam Turbo Tuff connecting rods are assembled from high-quality 4340 forged steel. Every rod is fully machined to the highest standards, and the Turbo Tuff design combines the appropriate weight and rugged strength for ultimate horsepower utilization. Each rod is shot-peened after machining and individually magnafluxed. These connecting rods feature 7/16 in. ARP 2000 cap screws with 12-point heads for outstanding 200,000 psi tensile strength.
Not Yet Reviewed
$257.22
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 310 )
$115.99
—
$141.99
Cloyes timing chain kits meet OE performance requirements. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These assemblies are available in various styles, including link belt, single roller, and single non-roller. Order the kit designed for fitment on your specific model or engine application.
( 174 )
$209.99
Sealed Power stock replacement oil pumps meet or exceed OE standards for oil delivery volume and pressure. With cast iron bodies and precision machining, they can be relied upon for adequate lubrication in both stock and mild performance rebuilds. Features include: * Direct replacement * Manufactured to strict engineering quality standards * No special tools required * Constructed of high-quality materials for durability
( 35 )
$176.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
