Availability
Showing In Stock Items. Show All 54 Items.
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 135 )
$11.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 54 )
$20.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 512 )
$15.99
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$16.99
Driven Racing Oil offers filters for virtually every application. These replacements are available in different makes, styles, sizes, and micron ratings. Oil filters remove contaminants from your engine's oil that can accumulate over time as the oil keeps your engine clean and lubricated. Tiny, hard particles can wear the surfaces in your engine, so an efficient filter is essential to performance. Order the model best suited for your vehicle.
( 2 )
$17.49
Lares power steering pulleys are designed to fit your OEM pulley setup. Manufactured from quality materials, and available for a wide variety of applications, each power steering pulley meets OE specifications to ensure a precise fit and proper function. Keep your steering system operating reliably, order the Lares power steering pulley in the application you need.
( 28 )
$18.99
—
$21.99
Keep your camshaft from wandering with Melling camshaft thrust plates. These solid steel plates protect your engine investment by returning your timing back to the desired specifications. Proper positioning of your camshaft is crucial. Don't let your cam walk--replace worn camshaft thrust plates with new ones from Melling.
( 38 )
$14.99
—
$17.99
Seal up the casting core holes in your engine block and heads with Melling freeze plugs. They're manufactured from a variety of quality materials—such as brass, steel, and stainless steel—and offered in different diameters and depths to fit your specific application. These expansion plugs help protect against cracks caused by the pressure of frozen coolant and in regular operation will ensure that all vital fluids stay in the engine, where they belong. They are available for a wide range of makes and models, and can be ordered individually or in a multi-piece kit.
( 165 )
$10.99
Melling Performance PRO-Line pushrods give you the reliability that you need from your valvetrain. They are manufactured from high-quality carbon steel, are hardened for use with guideplates, and exceed OEM specifications. Their pushrods also feature close-tolerance wall thickness and a centerless ground to make sure that they are a matched set. Choose Melling Performance PRO-Line pushrods to keep your valvetrain operating efficiently.
( 7 )
$10.99
—
$11.99
PRW harmonic damper bolts help hold your balancer properly locked in place as they absorb the massive energy from crankshaft flexing. Professionally designed to withstand 180,000 psi fastener yield strength, they also include a wide-area 1/4 in. thick washer to further spread the fastening load. For installation ease, these bolts feature a deep-socket, 12-point head-style so your torque wrench stays fully engaged up to spec. Show your knuckles some mercy--complete your install with PRW harmonic damper bolts. Order the bolt recommended for your specific vehicle and engine size.
( 9 )
$20.04
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 85 )
$19.99
—
$21.99
Avoid corrosion in your engine and replace your rusty freeze plugs with Proform's durable brass freeze plug kits. All of the necessary plugs are included for one complete engine block.
( 22 )
$19.99
Dayco High Performance V-belts deliver more flexibility and increased airflow around the accessory drive belt, so they run cooler and last longer than most competitive belts. Dayco was one of the first to develop raw edge sidewall construction, which facilitates controlled slippage around pulleys. This feature ensures the superior performance that drivers demand from their vehicle. The V-belts' three plies of neoprene-impregnated fabric resist heat, oil, and grease. A specially formulated treatment of the polyester cord provides the strength, stability, and reliability that's required within the standards of today's industry.
( 85 )
$10.99
—
$22.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 94 )
$13.99
—
$20.99
Wrap up your engine build with BluePrint Engines' oil and filters. Their oil filters are available for your SBC/BBC, SBF/Mopar, and LS-style engines. These filters are high-quality, canister styles recommended by BluePrint with premium filter media.
( 12 )
$13.95
Even the messiest underhood accessories can have a great looking outer façade! Spectre Performance engine oil dipsticks and tubes feature dipstick handles available in materials such as steel, aluminum, and stainless steel—but it's the chrome or polished finishes that put the gleam on a part that hides oil beneath. Spectre dipsticks and tubes are in stock for fitment on a wide range of makes and models in variety of styles and lengths.
( 109 )
$16.99
On Sale
The lifeblood of your vehicle is lubricant—which is why Mr. Gasket engine oil dipsticks and tubes are so important. They're small, inexpensive parts that tell you if your oil supply is dangerously low. And besides the function they fulfill, these accessories look great under the hood. Made from steel or billet aluminum, the dipsticks are available in a black, polished, or chrome plated finish. Find the OE-style kit that's built to fit your specific engine application.
( 84 )
$31.48
$20.46
Clearance
Melling engine expansion plug kits come with everything needed to replace the leaky "freeze" plugs on your current engine. When you have the motor out of the chassis, it's the ideal time to update the plugs before they start leaking. Order the kit recommended for your application—and stay ahead of the game with Melling!
( 12 )
$13.99
—
$17.99
Available for a wide selection of popular engines, Proform chrome engine oil dipsticks kits consist of both the stick and the tube. These kits have classic hook handles.
( 93 )
$13.99
Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.
( 76 )
$13.99
Melling Automotive Products manufactures a complete line of heavy-duty oil pump intermediate driveshafts. These shafts are made of stress- and fatigue-proof steel for maximum strength and durability. They're available for thousands of vehicle and engine family applications.
( 177 )
$12.99
—
$16.99
When oil, heat, and abrasion combine to weaken most standard accessory belts, Continental OE Technology Series V-belts will still be going strong. Continental V-belts have inherited tough construction characteristics: EPDM rubber compounds, high-strength Vytacord tension members, fiber reinforced helical cogs, and high-traction rubber edges. These features provide higher heat and abrasion resistance, no-slip contact with pulley grooves, a great fit, and improved flexibility—to deliver consistent, efficient performance, mile after mile. Belts wear and need replaced; get more for your buck with longer-lasting Continental OE Technology Series V-belts, available for a wide range of vehicle-specific applications.
( 50 )
$13.99
—
$21.99
Dorman expansion plugs are conveniently designed aftermarket replacements for stripped plugs. A leak-proof fit and long service life are assured every time, due to high-quality standards and materials used in the manufacturing process. Dorman engine and camshaft expansion plugs are offered in multiple sizes, styles, and materials for precise fitment on countless makes and models. They're easy to install and available individually or in multi-pack sets.
( 75 )
$11.99
—
$18.99
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 74 )
$10.99
—
$13.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
