Availability
Red Line MT-90 transmission gear oil is designed to provide excellent protection and improved shiftability for manual transmissions and transaxles. Popular in Nissan, Toyota, and Mazda manual transmissions and transaxles, as well as other selected applications, this is a 75W90 GL-4 gear oil that's slightly heavier than MTL. It provides excellent protection of gears and synchronizers, and its balanced slipperiness provides a perfect coefficient of friction, allowing for quicker shifting.
( 66 )
$23.10
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Note, however, that these gaskets are not intended for race applications.
( 250 )
$36.99
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 313 )
$38.99
—
$51.99
Red Line GL-5 gear oil has been engineered to provide the highest degree of protection and improvement of your differential efficiency. Formerly Lightweight gear oil, this new formula contains additional friction modifiers for suitability with clutch-type limited slip differentials, and for most, no additional friction modifiers would be required. This gear oil offers excellent lubrication, a high viscosity index, and the ability to lower operating temperatures, as well as exceeding API GL-5 specifications. Reduce friction for better performance--add the improved formula of Red Line GL-5 gear oil.
( 88 )
$23.53
Red Line MTL transmission gear oil is a 75W80 GL-4 gear oil (SAE 5W30/10W30 engine oil viscosity) designed for use in manual transmissions and transaxles. MTL is a low 75W at very low temperatures, and a high 80W, nearly an 85W, at elevated temperatures, providing adequate viscosity to prevent wear and deaden gear noise. Overall, this gear oil offers excellent protection of gears and synchronizers, and its balanced slipperiness provides a perfect coefficient of friction, allowing easier shifting.
( 71 )
$23.10
It's easy to diagnose worn-out oil pan gaskets--just follow the trail of black drips on your clean cement. Fel-Pro offers hundreds of OEM-style replacements to fit a wide range of auto, truck, marine, industrial, and agricultural applications. Many are one-piece units, while others are multi-piece with kit accessories. Depending on your vehicle, the oil pan gaskets could be constructed of molded rubber, cork and neoprene, PermaDryPlus, or rubber-coated fiber or steel core. Match up your specs to the Fel-Pro gasket needed to seal off oil leaks.
( 983 )
$31.99
—
$44.99
Spicer Drivetrain Products Life Series U-joints consistently outperform the rest, so you can hit the road or trail with confidence. Cold-forged from high-quality steel, these SPL universal joints feature synthetic thrust washers, multi-lip seals, and the choice of greaseable or non-greaseable. Get the most out of your rig with Spicer Life Series U-joints. Order the replacement model designed to fit your vehicle.
( 111 )
$25.99
—
$31.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 304 )
$39.99
—
$47.99
On Sale
ACCEL performance spark plugs produce a larger spark for more power at high rpms. They improve throttle response and fuel economy and reduce fouling. Their purified Alumina insulator prevents arcing, and their machine-rolled threads protect heads.
( 282 )
$40.21
—
$46.06
Do you need a replacement fan clutch? These fan clutches by Hayden Automotive are manufactured to ensure performance and durability. Hayden offers thermal, non-thermal, and heavy-duty series fan clutches that meet strict factory guidelines. All Hayden Automotive fan clutches should only be used on the specific applications for which they are cataloged. Use of the wrong fan clutch may result in poor cooling, excess noise, reduced mileage, and/or fan clutch failure.
( 435 )
$25.99
—
$54.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 52 )
$20.99
—
$22.99
Fel-Pro PermaTorque head gaskets are the industry standard for no-retorque designs available today. The torque retention is gained through premium materials comprising four distinct components--core, facing, coating, and armor--and the process used in the manufacture of the gaskets. Fel-Pro PermaTorque head gaskets have been proven to retain the highest torque retention significantly better than other brands. These composite-style gaskets compress at installation to conform to and seal minor surface imperfections, while retaining the ability to resist or recover from compression during engine operation. The result is a clamping force and a secure seal over a long period of time--without retorquing.
( 42 )
$26.99
—
$39.99
OER stainless steel wiper blades are reproduction blades designed for various classic and modern classic vehicles. They're modeled after period-correct name brands with stainless steel frames and rubber blades, plus any features those original models included. Keep your project vehicle true to form with the OER stainless steel wiper blades designed for your restoration application.
( 18 )
$22.79
—
$45.79
Edelbrock high performance thermostats are designed to ensure consistent cooling in high performance applications. Edelbrock thermostats feature brass and copper valve assemblies with stainless steel bodies for durability. They are bolt-on OE-style replacements and are available to fit many popular domestic and import applications. They are available with160, 180, and 190 degree F ratings.
( 40 )
$22.95
—
$24.95
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 40 )
$38.99
On Sale
Mr. Gasket high-performance thermostats are designed to resist large variations in coolant pressures that can occur at high rpms. Under these conditions, coolant temperature and pressure fight for control of the thermostat, keeping it from opening at its designed temperature. These balanced high-performance thermostats have brass-and-copper construction, and open at the right temperature regardless of engine rpm.
( 231 )
$31.46
$20.45
—
$29.11
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 148 )
$22.99
—
$40.99
McGard lug nuts are designed to last for life. These wheel fasteners are made of restricted chemistry steel for structural integrity, then triple nickel chrome plated in silver or black for lasting beauty. All McGard lug nuts are through-hardened and tempered, reaching the depth of hardness needed for their unsurpassed level of safety (unlike case-hardening, which is only a surface treatment). They're available in a variety of thread sizes, shank lengths and diameters, and seat and conical styles. McGard lug nuts also offer a lifetime guarantee against rust!
( 579 )
$21.99
—
$29.99
Red Line MTLV GL-4 gear oil is recommended for GL-1, GL-3 and GL-4 applications, as well as where most special synchromesh fluids are specified. This high-performance gear oil offers quicker shifts, improved coefficient of friction, and better gear protection. It also eliminates notchy shifting, even when cold, and has a less slippery low sulfur formula that's compatible with brass synchronizers. Furthermore, Red Line MTLV GL-4 gear oil remains stable at high temperatures in performance applications. Additional attributes: * Satisfies the gear oil viscosity requirements of 70W and 75W * Low sulfur formula lacks the reactive sulfurs found in most GL-5 oils that cause damage and is safe for brass synchronizers * Popular in Toyota/Lexus LF 75W, BMW X-Drive and other transfer cases transfer cases calling for Shell TF0870 * Recommended for Mercedes 235.10, Dodge/Fiat BOT 350 M3, GM BOT 303 mod, Toyota/Scion Manual Transmissions Gear Oil LV, VW/Audi and BOT270A Graziano Transaxle for Aston Martin, Audi and Lamborghini * Low fluid friction to improve power transfer
( 4 )
$22.00
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 176 )
$27.99
—
$37.99
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 115 )
$22.99
—
$58.99
On Sale
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 444 )
$30.95
Sealed Power cast piston rings are part of the comprehensive line of Sealed Power engine components that provide innovative designs, use leading edge materials, and utilize ISO and QS certified manufacturing to deliver top-quality products that meet the rigorous demands of both classic and today's modern engines. Features of and benefits of Sealed Power cast piston rings include: * Variety of top ring and top ring facing materials * Decreased friction * Very resistant to scuffing * Exacting tolerances * Meets or exceeds OEM specifications
( 80 )
$23.99
—
$42.99
Yukon Gear & Axle axle bearings are made from top-quality materials to original specs, so you can be sure that you're getting a quality product. These replacements are available for a variety of axle model applications, from the 1950s and up.
( 69 )
$38.91
—
$44.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
