Availability
Showing In Stock Items. Show All 65 Items.
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 608 )
$926.00
—
$1,153.00
On Sale
Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.
( 29 )
$636.79
—
$766.79
$596.79
—
$726.79
On Sale
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at their 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, they allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside. So, if you want more power and less noise, then you've got to get Flowmaster 40 Series mufflers.
( 356 )
$99.95
$89.95
Borla ATAK CrateMufflers will optimize the sound and performance of your crate and custom-built motors. Get the loud, deep growl you crave from an aircraft-grade T-304 stainless steel exhaust. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity—and the mufflers are custom-tuned for your specific vehicle. Let Borla help you achieve the perfect exhaust note for your custom build. Order the CrateMuffler size and configuration for your vehicle application.
( 58 )
$248.99
—
$266.99
ARP manufactures a variety of header bolt kits to facilitate the installation of your headers. Rated at 170,000 psi, they're much stronger than stock and will last under even the most severe conditions. Each kit includes the specific number of parts required for the desired application, plus premium-quality washers and either hex or 12-point heads.
( 334 )
$18.99
—
$19.99
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 546 )
$799.95
—
$949.95
$718.95
—
$853.95
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 228 )
$799.95
—
$1,449.95
$519.95
—
$942.95
You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.
( 303 )
$523.38
—
$781.68
On Sale
Flowmaster tailpipe kits finish off your exhaust with high-quality mandrel pre-bent pipes. Available in 16-gauge aluminized steel tubing or 16-gauge 409 stainless tubing, Flowmaster tailpipe kits are designed to fit perfectly onto your vehicle with all the quality and performance you expect. These mandrel-bent tubes eliminate kinks in the bend area for improved exhaust flow plus it allows you to route hot exhaust out from under your vehicle, keeping it cleaner and safer without a loss in performance. Add Flowmaster tailpipe exhaust technology to your ride.
( 323 )
$215.95
$194.35
On Sale
Flowmaster FlowFX mufflers feature mandrel-bent bright stainless steel tubing, mated to specially designed straight-through for great sound and maximum performance. FlowFX 409 stainless steel mufflers deliver a moderate to aggressive interior and exterior sound level that will appeal to anyone looking for a deep, powerful exhaust note.
( 394 )
$69.95
$62.95
On Sale
Hooker RacingHeart Chevy swap long tube headers are race-only components. They include mandrel-bent tubing and thick flanges, plus they're offered in two materials and four different finishes. Order the model preferred for your application. Hooker RacingHeart long tube headers feature: * 2 1/8 in. mandrel-bent primary tubes and long transition 3 1/2 in. collectors with merge spears for increased exhaust velocity * 3/8 in. thick header flanges for strength and maximum sealing surface * Available in natural or polished 304 stainless steel, as well as black painted or ceramic coated mild steel * Gaskets and hardware included * For use with AJE K-member and engine mounts
( 4 )
$759.95
—
$799.95
$682.95
—
$718.95
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$1,020.65
—
$1,211.10
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$872.65
—
$1,706.60
ARP manufactures a variety of header stud kits to facilitate the installation of your headers. Rated at 170,000 psi, they're much stronger than stock and will last under even the most severe conditions. Each kit includes the specific number of parts required for the desired application, plus premium-quality washers and either hex or 12-point nuts. Universal kits are also available.
( 63 )
$75.99
—
$85.99
JBA Performance Exhaust Evol exhaust systems are tuned and precision-built for each application, so you get a perfect fit and optimized performance every time. They are offered in both bright 409 stainless steel with 304 stainless steel tips and high-quality aluminized steel. The mufflers feature an efficient high-flow design and fully welded cases for long-lasting performance. These Evol exhaust systems increase horsepower and torque throughout the rpm range, improve fuel economy and throttle response, and produce a powerful exhaust tone and enhanced vehicle appearance. Get the power and the sound that you're looking for with the JBA Performance Exhaust Evol exhaust systems!
( 36 )
$414.80
—
$1,315.10
On Sale
Pypes H-Bomb exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Systems are offered in different styles to cover a long list of years, makes, and models, and they are available without mufflers or with Turbo Pro (T), Race Pro (R), Street Pro (S), or Violator (V) mufflers. All Pypes H-Bomb exhaust systems are fabricated using the highest quality materials; 16-gauge, mandrel-bent, 409 stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower, and the stainless construction enables them to resist corrosion and extend the life of the system. The mufflers, H-pipe, and OEM-style tailpipes are precision matched to deliver the ultimate in sound and performance. Cad plated or stainless clamps, stainless hangers, and polished 304 stainless tips are available and included in many systems. These systems can be installed at home without any special tools. Improve your vehicle's exhaust flow, power, and sound with one of the many Pypes H-Bomb exhaust systems available. Order the perfect fit for your car from Summit Racing®.
( 23 )
$640.79
$600.79
On Sale
Flowmaster Super 44 Series mufflers use the same technology as the original Super 40 mufflers—but also offer some distinct advantages. The Super 44s deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Delta Flow technology. They're the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. Super 44s are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then order the Flowmaster Super 44 muffler best suited to fit your application.
( 398 )
$134.95
$121.45
On Sale
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 366 )
$169.95
—
$184.95
$152.95
—
$166.45
ARP stainless steel header bolts are 15 percent stronger than Grade 8 steel. These bolts have a compact head that will allow a socket to fit into those tight, tricky spaces next to the headers. These bolts are both highly corrosion-resistant and heat-resistant. They have a polished finish and come in 12-point and hex-style heads.
( 383 )
$29.99
To protect your investment, you'll want to mount your headers with strong, reliable, quality hardware. Milodon header bolts fit the bill. They are made from rugged Grade 8 steel for extra-high strength and are heat-treated for added reliability. They have compact 3/8 in. hex heads, which allow for the use of a standard socket in those tight areas around and between header tubes. They also have a bright, classy looking gold iridited finish to complete the visual package.
( 54 )
$17.95
—
$19.95
On Sale
Burning your hands on headers or the exhaust manifold when bolting them on just became a thing of the past. Mr. Gasket HEADLOCK locking header bolts simplify header installation with high-strength, 2-in-1 self-locking bolts that eliminate the need for lock washers. Designed for the performance engine builder, these innovative, patent-pending fasteners have 24 equally spaced serrations in the face of the hex head. The bolts grab and lock on to your manifold surface, virtually eliminating the chance that one might back out from vibration or because of the varying expansion rates of different metals. Mr. Gasket HEADLOCK locking header bolts are available for numerous domestic applications, including Chevrolet, Chrysler, Ford, AMC, Oldsmobile, and Pontiac. They're manufactured from stainless steel, designed to withstand tensile strengths of 150,000 pounds per square inch, and come with a bright polished finish.
( 50 )
$56.95
$37.02
No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!
( 290 )
$523.38
—
$781.68
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 250 )
$561.95
—
$757.00
On Sale
Flowmaster Super 40 Series Delta Flow mufflers go a step beyond their original 40 Series product. By precisely placing three internal baffles in the case, and welding them to exacting specifications, the 40 Series Delta Flow mufflers not only out-scavenge the originals, but they also provide superior reductions in exterior sound levels and resonance, which are transmitted through the exhaust system and into the vehicle. You get all this, plus improved torque and horsepower—and that famous Flowmaster sound!
( 144 )
$149.95
$134.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
