Availability
Showing In Stock Items. Show All 67 Items.
Ford Performance Parts camshaft drive kits include all of the components that you need for proper timing. They're offered in numerous packages for a variety of applications and include high-quality production components for increased durability. Depending on vehicle, kits may include new production: * Tensioner arms * Chain guides * Primary and secondary timing chains * Primary and secondary timing chain tensioners * Camshaft sprockets, spacers, bolts, and washers * Camshaft VCT phasers and bolts * Crankshaft sprockets, spacers, and washers * Crank position trigger wheel * Dowel pins and fasteners
( 46 )
$492.99
—
$614.99
Ford Performance Parts ring and pinion sets are engineered, manufactured, and tested for maximum performance. These ring and pinion sets are finished in a black oxide coating for corrosion resistance, and are available in many different ratios to fit a variety of Ford differentials.
( 130 )
$190.99
—
$207.99
Ford Performance Parts roller rocker arms have hardened steel bodies and a needle-bearing fulcrum to reduce valvetrain friction. Ford also includes a roller tip to decrease the load on the valve guides for better longevity.
( 31 )
$298.99
—
$422.99
Ford Performance Parts Traction-Lok differentials optimize your vehicle's traction by transferring the power to both rear wheels. These limited slip differential units use heavy plate-style clutches to ensure your engine's full power potential makes it to the ground. Perfect for the street or strip, these differentials will accommodate the anti-lock brake exciter ring found on most late model vehicles.
( 37 )
$352.99
Have you ever wondered where you were going to put your oil filter? Doesn't it always seem to be in the way of other accessories? Not anymore with these handy Ford Performance Parts oil filter adapters. They simply screw into the block and rotate the filter toward the front of the engine to provide clearance for engine swaps and chassis modifications. The adapters are available in different models for use with over a thousand applications.
( 21 )
$154.99
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 14 )
$689.99
Ford Performance Parts axle girdles are a great way to strengthen the rear-end of your car. Made of lightweight aluminum, they incorporate load bolts that provide additional support for differential bearing caps. Because they reduce the amount of flex in your differential while under load, they significantly reduce bearing wear and chipped teeth on the ring and pinion. They provide increased ring and pinion gear life and are a definite must for all racing and high performance street cars. Additional information: * Available for a variety of applications, including some independent rear suspensions * Replaces OE rear cover * Covers with cooling fins and machined for differential cooler pickup and return fittings recommended for road racing or extended high-speed/high-temperature applications * Models equipped with differential coolers may require modifications * Check exterior clearance to chassis/suspension
( 77 )
$252.99
Ford Performance Parts front lower control arm kits enable the owners of Ford vehicles to upgrade them with better ball joints and improved bushings. Track use kits offer improved geometry. These kits are recommended by Ford for many applications when heavy-duty suspension components are added. They include left and right lower control arm assemblies. Depending on application, additional features may include: * Forged steel control arms * Spherical bearings * Air deflectors to aid in brake cooling * Improved geometry for track use * Increased strength ball joints * Threaded ball joints for easy replacement * Some for off-road use only * Installation hardware and instructions included * Extensive modifications required for use on some production vehicles * Note: Some factory fasteners are single-use; refer to the appropriate Ford service manual for reuse information and correct torque specifications
( 24 )
$345.99
These Ford Performance Parts 4.6L 3-valve performance intake manifolds feature high-flow runners and an open plenum design for maximum flow, while still fitting underneath stock Mustang hoods. They are manufactured from lightweight composite plastic and have been tested up to 20+ psi; perfect for use in forced induction applications. Ford Performance Parts 4.6L 3-valve performance intake manifolds include a set of intake gaskets to complete the installation. Additional technical information: * Works well with Ford Performance M-6550-3V hot rod camshafts, M-6049-N3VPA high performance CNC-ported 3V cylinder heads, and M-9926-3V 62mm throttle bodies * Less heat soak than aluminum intakes * MAP sensor mounting boss for speed-density applications * Calibration required (not included) * Throttle body not included * Does not fit with Ford Performance strut tower braces
( 11 )
$786.99
Ford Performance Parts mini high-torque starters are a great addition to your car. They feature a high-output motor with internal gear reduction that provides more cranking power than stock, yet is 30 percent smaller. Their smaller size brings the weight down 5 lbs. from OE starters and provides a great deal more header clearance. These are the perfect starters for vehicles with high-compression engines and tight-fitting headers.
( 80 )
$305.99
Ford Performance Parts 2005-14 Mustang wheel hubs equip your vehicle with performance. These wheel hubs are designed as service replacements for FR500S Boss302S race cars and are an upgrade for your V6, Boss, GT, or Shelby GT500. They feature 3 in. ARP front wheel studs and include a new hub nut. Get genuine wheel hub replacements for your Mustang from the creators--Ford Performance Parts. ARP stud specifications: * Stud style: 3 in. press-in * Thread size; 1/2-20 in. RH * Knurl Diameter: 0.549 in. * Under head length: 3.315 in. * Replacement open end wheel lug nuts: FMS-M-1012-G
( 10 )
$396.99
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 45 )
$149.99
Ford Performance Parts Hi-Flow throttle bodies provide more air and produce more power than stock throttle bodies, while also providing good drivability and low-speed control. Available in a variety of styles, number and size of venturis, materials and finishes, they are precision-machined to ensure consistency and accept all stock sensors and controls. Depending on application, features include: * All factory sensors installed; no need to tear apart your original throttle body * Calibrated for idle air flow using the same procedure as production throttle bodies * Consistent high flow * Great looks and underhood "bling" * Validation through hundreds of hours of dyno, racing, and street performance driving * All cfm ratings calibrated at 28 in. of water, measured on SuperFlow SF-1020 flow bench
( 22 )
$869.99
Ford Performance Parts Tremec Cobra R bellhousings are designed to mount the Tremec 3550 manual transmission to Ford 4.6L/5.4L modular gas engines. They are manufactured from cast aluminum and feature all factory mounting positions. The Tremec Cobra R bellhousings may require minor modifications for transmission clearance and mounting in some vehicle applications.
( 4 )
$669.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$22.99
—
$223.99
Ford Performance Parts Mustang Coupe Dynamic dampers have been specifically designed and built to provide better handling for your Mustang. Dynamic Suspension manufactures dampers for Mustang road race cars. They feature a single adjustment with two-way response. The larger pistons and stiffer valving will give your pony the performance ride and feel that you've been searching for. Notes: * Some applications require Ford Performance Parts springs and/or upper strut mounts * Ford Performance Parts spring kits, sway bar kits, and strut tower braces are recommended for optimum performance in most applications * Some factory fasteners are single-use; refer to the appropriate Ford service manual for reuse information and correct torque specifications * Alignment check is required after installation
( 11 )
$622.99
Ford Performance Parts throwout bearings have a heavy-duty self centering bearing design. They last longer than most aftermarket bearings and will fit many applications.
( 25 )
$75.99
Ford Performance Parts 4.6/5.4L 3-valve cam covers are designed to bolt on to your late model Ford 4.6/5.4L V8 engines. They are made of cast aluminum and are available in different powdercoated finishes to match your style. They include cam cover gaskets, VCT solenoid grommet, and fasteners. Ford Performance Parts 4.6/5.4L 3-valve cam covers are 50-states street legal when installed with the appropriate closed PCV hardware.
( 27 )
$379.99
—
$394.99
Add some style and durability to your ride with Ford Performance Parts differential covers. Each cover is made of top quality materials and given a rugged powdercoated finish to ensure they stay looking good no matter the conditions. Upgrade your differential cover with Ford Performance Parts.
( 9 )
$250.99
Is it time for a brake job? If so, then pick up one of these Ford Performance Parts Mustang GT 14 in. brake upgrade kits to help stop your Mustang more quickly and consistently. They include two vented 14 in. diameter rotors, two 4-piston aluminum black anodized Brembo brake calipers, front and rear brake pads, front disc brake backing plates, and a set of four DOT-approved stainless steel brake lines. Decrease your stopping distance with one of these Ford Performance Parts Mustang GT 14 in. brake upgrade kits.
( 2 )
$1,692.99
Ford Performance Parts has a range of spark plugs to meet your performance needs. Designed for use in engines operated at sustained high rpm or with higher-than-stock cylinder combustion pressures, these plugs are made from quality materials and are designed to provide the spark that you need to fire up your Ford. Depending on the application, features of Ford Performance Parts spark plugs may include: * Available in heat ranges colder than the stock spark plugs * Sold individually and in sets * Pre-gapped at the factory * Offered in a variety of thread sizes * More robust construction for race applications
( 34 )
$119.99
—
$126.99
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$462.99
Ford Performance Parts clutch kits are available in several diameters and a wide variety of configurations to meet the specific requirements of your street, street/strip, or race vehicle. Depending on the application, available features include: * Heavy duty-organic linings * Carbon/copper linings on flywheel side and carbon linings on pressure plate side * Heavy-duty diaphragm kits with approximately 40 percent more capacity than stock clutches * Heavy-duty diaphragm-types with centrifugal assist and approximately 25 percent more capacity than OE units * Stronger covers and revised internal geometry to reduce clutch pedal effort by 10 percent * Nodular iron and cast iron plates * Some installations require new flywheels * Metric fasteners and dowel pins must be used with some clutches * Note: May mix and match Ford Performance Parts clutch discs and pressure plates, but do NOT install a FPP pressure plate with a stock disc or vice-versa as disengagement problems may occur
( 39 )
$332.99
—
$559.99
Ford Performance Parts cylinder head changing kits include multi-layer steel head gaskets and high-strength torque-to-yield head bolts. They make changing the cylinder heads on your Ford engine significantly easier and are highly recommended when installing Ford Performance Parts cylinder heads.
( 19 )
$154.99
—
$165.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
