Availability
Showing In Stock Items. Show All 11 Items.
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$741.99
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 14 )
$689.99
Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength driveshaft assemblies. These 3 in. diameter tubes are custom-drawn for consistent strength. Their forged yokes are welded on using state-of-the-art processes for improved reliability. They're accepted for use in most NHRA and all IHRA classes.
( 21 )
$590.93
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 317 )
$500.95
—
$787.99
Cardone remanufactured driveshafts are 100 percent dynamically balanced at 3200 rpm for vibration-free operation and increased joint life. They're engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Shafts are measured and straightened, slip yokes are lubricated, and new universal joints are installed to ensure optimum performance and durability. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. OE fit, form, and function come together with economical pricing in Cardone remanufactured driveshafts. Order the model recommended for your vehicle.
( 30 )
$501.99
—
$849.99
Superlift Suspension driveshafts are made from the same high-quality materials as stock—and are direct replacements for OE shafts. However, there's an important difference. Where OE shafts have only two U-joints—one at each end—Superlift shafts have three. Two of them are paired up at one end, allowing them to take much greater "angles" than the stock units. That can be an important factor when you're lifting your vehicle. These driveshafts are available for a variety of applications from the 1990s and up.
( 5 )
$799.99
USA Standard Gear driveshafts are high-quality, direct replacement units to repair your binding, bent, or rusty driveshaft. This critical component keeps the power flowing from transmission or transfer case to your differential. Order the model recommended for your vehicle and engine application. Features include: * 100 percent new components * Slip yokes and U-joints are lubricated with high-temperature grease * Fully assembled for simple out-of-the-box replacement * USA Standard "Perfect Fit" driveshafts are guaranteed for proper fitment and easy installation * Strengthened over common, OE-replacement shafts to prevent failure * Dynamically balanced to ensure smooth operation and long life
( 6 )
$501.99
—
$740.99
Age, miles, and abuse take their toll on drivetrain parts, making rebuilds and new parts a necessity. When you're seeking direct replacements for OEM, you need Spicer Drivetrain Products slip yokes. Spicer products are used in the production of many vehicles and are well-respected for quality, innovation, and value. These slip yokes are produced with the same high standards as the originals for reliable service. When rebuilding a transmission, use the parts that made it great. Go with Spicer Drivetrain Products slip yokes.
( 126 )
$632.99
Get rid of that old or damaged driveshaft on your lifted vehicle and replace it with a driveshaft from Skyjacker. Made from high-quality steel, these replacement driveshafts are designed with all of the quality that Skyjacker is famous for.
( 1 )
$804.07
When you don't need a Super Joint, Yukon Gear & Axle also offers other U-joints—including standard, adapter, and lifetime models. But, even though they're not "super," all Yukon universal joints are tough enough to keep your shafts connected and spinning with awesome performance. Order the model designed for your application.
( 23 )
$761.99
—
$768.99
Yukon Gear & Axle Super Joint kits feature U-joints that will stand up to abuse and never let you down. Your off-road adventures can get a little crazy, and you need really good components to keep you travelin' over the terrain. Yukon Super Joints are forged from through-hardened 4340 chromoly and then titanium nitrite coated—creating U-joints with ultimate yield and tensile strength, plus an extremely hard surface! Some kits also include a nifty little grease gun and a tube of copper-based grease. Beef up your axle with the super strength of Yukon Gear & Axle Super Joint kits.
( 1 )
$772.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
