Availability
Showing In Stock Items. Show All 107 Items.
Tremec offers a variety of TKX 5-speed manual transmission for select GM and Ford applications. Each model features different gear ratios. Order the transmission best suited for your vehicle. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * Input Shaft: 26-Spline (requires 26-spline clutch disk) * Output Shaft: 31 Spline * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety
( 43 )
$2,895.00
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 55 )
$2,132.95
—
$2,182.95
Introduced in the early 1980s, the Tremec T-5 has become a highly evolved, extremely compact, and versatile 5-speed manual transmission. In its rich history, the T-5 has been installed as original equipment in pickup trucks, SUVs, and performance automobiles. Today, the T-5 is available in its best form to date—sometimes referred to as "world class" or Z spec (from Ford's part number 7003Z). It has a 2.95 first gear with .63 overdrive, hardened gears, short throw factory shifter, steel front bearing retainer, tapered output shaft bearing, and a seven tooth-drive speedometer gear. Best of all, the T-5 transmission has a torque rating of 300 lbs.-ft., making it a perfect option for any moderate powered hot rod, street car, or kit car. Additional details: * The most compact Tremec transmission available, making it a "go to" for projects with limited space * At 75 lbs. dry, it's attractive for weight-conscious builds * Excellent drivability is achieved with light shift effort and smooth, positive shift quality * Its .63 overdrive provides exceptional fuel mileage * Popular choice for weekend cruisers, street-rodders, and kit car enthusiasts
( 7 )
$2,000.00
Ford Performance Super-Duty T-5 transmissions are world class components for your hardcore street machine. Features include: * Heavy-duty "World Class" T-5 5-speed manual transmission with short-throw shifter * 300 ft./lbs. torque capacity * Double-moly 2nd speed, 3rd speed and countershaft cluster gears * Carbon-fiber 3-4 blocker rings * Improved synchronizers and bearings * 1-1/16 in. diameter 10-tooth input spline * 28-tooth output spline * 7-tooth speedometer drive gear * Cobra-style pocket bearing
( 32 )
$2,286.99
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$1,967.95
—
$2,606.95
These Ford Performance Parts Tremec 6-speed transmissions are designed to withstand the abuse of the street or strip. The hardened internals are built to withstand up to 700 ft.-lbs. of torque, while still giving you quick and precise shifts throughout the rev range. These T56 Magnum transmissions come equipped with multiple shifter mounting options and provisions for either an electronic or mechanical speedometer, making them very versatile. Whether you're building a drag car, hot rod, or just wanting to beef up your existing system, these Ford Performance Parts Tremec 6-speed transmissions are the answer you are looking for.
( 4 )
$3,899.99
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 151 )
$3,349.95
—
$3,375.95
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 3 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 450 lb.-ft. of torque * 10 in. custom built billet converter with lock-up * Stall: 2,600 to 3,200 * Master overhaul kit with Alto hardened steels * Raybestos Stage I frictions * TransGo reprogramming shift kit with shift command * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * Complete Torrington bearing kit * New bushing kit * New reverse band * Alto Red Eagle wide O.D. band * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Rev. drum with heavy-duty mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly * Expanded capacity overdrive servo * Updated O.D. servo pin * Updated 3rd accumulator piston * Transmission mount * Custom 360-degree adjustable shift linkage arm
Not Yet Reviewed
$7,095.00
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 30 )
$1,809.95
—
$1,865.95
South Bend Clutch Dyna Max organic clutch kits are manufactured with performance organic friction material. Designed to provide smooth clutch engagement, these Dyna Max organic clutch kits include the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. The kits are available for a variety of clutch styles and applications and may come with or without a flywheel. Select the kit to fit your application needs.
( 98 )
$870.41
—
$1,392.65
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 372 )
$463.99
—
$581.99
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 3 )
$4,095.00
South Bend Clutch stock replacement kits are an upgrade for your GM, Ford, or Dodge diesel rig. These single-disc kits offer organic friction material for smooth engagement with a high-quality construction for longer service life. The kits are available with or without a solid flywheel. Whether you need to replace your failing stock clutch or you want to increase your truck's horsepower and need a clutch that can keep up, South Bend Clutch has the best options for you. Select the stock replacement clutch needed.
( 5 )
$669.30
—
$696.32
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,095.00
—
$1,495.00
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,487.50
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 63 )
$799.00
TCI StreetFighter automatic transmission packages are durable enough to withstand the rigors of even the toughest street machines. Using the highest quality TCI manufactured components, each StreetFighter package is equipped with an automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. This gives you racetrack shifts and shaves time off your ETs. Each transmission goes through a variety of tests to verify that internal fluid pressures and shift characteristic match TCI's strict quality control standards. For the system to operate properly, all throttle linkage, vacuum lines and kick-down components must be connected. Each transmission package consists of a triple-tested TCI transmission and precision-tuned torque converter, a universal transmission cooler and premium TCI RTF transmission fluid. These packages are available with a variety of transmission models and other performance options. Choose the package for your application needs.
( 16 )
$3,974.95
—
$4,293.95
South Bend Clutch Dyna Max organic feramic clutch kits are manufactured with performance organic and feramic friction materials, which provide moderate clutch engagement. The Dyna Max organic clutch feramic kits by South Bend Clutch are durable and reliable. They come with the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. These kits are available for a variety of clutch styles and applications, with or without the flywheels. Select the kit best suited for your application needs.
( 22 )
$1,059.73
—
$1,075.62
VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.
( 7 )
$2,174.99
—
$6,166.99
Introducing the new Centerforce SST (Solid Street Twin) clutch and flywheel kits—engineered and developed for vehicles producing 400 to 925 lbs.-ft. of torque. The SST discs utilize solid hubs to reduce the rotational weight on the input shaft for quick clean shifts. The discs in the assembly are built using high-quality friction materials, for smooth engagement and longevity. These SST clutch and flywheel kits feature a lightened billet steel flywheel, providing low inertia resulting in quicker rpm and the Centerforce anti-rattle system to reduce floater rattle/noise. In addition, no complicated setup or adjustments are required, just bolt in the clutch and flywheel kit application you need—and "get a grip"! For streetcar enthusiasts looking for a high-quality Twin disc clutch system, the Centerforce SST clutch and flywheel kits are an economical choice. Key features and benefits: * Positive drive floater * Easy pedal * Precision balanced * Smooth engagement * Spec card included * ARP hardware * Solid hub for light weight and quick shifts * Simple install
( 5 )
$1,259.95
Hot rods, off-road buggies, and even classic touring cars and trucks have all become homes to Dodge Cummins motors. South Bend Clutch Conversion clutch kits allow you to install one of these iconic motors into your ride while maintaining your stock 5 or 6-speed transmission. These kits include the flywheel and bolts, throwout bearing, pressure plate, organic disk, and alignment tool. Cummins motors are known for longevity, incredible grunts, and easy upgrades. Install one into your truck with South Bend Clutch Conversion clutch kits.
Not Yet Reviewed
$870.41
—
$1,102.51
Cummins motors are synonymous with towing heavy loads. If you plan on using your 450+ RWHP Cummins converted truck primarily for towing, you'll want to run South Bend Clutch Conversion dual disc clutch kits. Unlike aggressively engaging, single full metallic disks, these dual disks provide less pedal pressure and greater grip. These kits feature one organic disk and one sintered iron feramic disk for improved heavy-duty performance. Whether you're hauling gooseneck, fifth-wheel, or rear-mount trailers, South Bend Clutch Conversion dual disc clutch kits won't leave your left leg feeling abused.
Not Yet Reviewed
$1,392.65
XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.
( 5 )
$870.25
—
$2,632.98
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 229 )
$899.00
—
$995.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
