Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
34 Results Found For "Engine"
Showing In Stock Items. Show All 44 Items.
BluePrint Engines Starters
BluePrint engine starters feature billet aluminum mounting blocks and their "clockable" models can be rotated or turned for special clearance needs. BluePrint uses high-quality internals for long-life and durability. BluePrint engine starters are trusted by engine builders worldwide!
( 34 )
$159.99
Tilton Severe-Duty Super Starters
Tilton severe-duty Super Starters pack a lot of power into a compact package--a hefty 3.0 hp, in fact. That's enough to crank over just about anything, and they only weigh about 12 lbs. They feature full ball-bearing or needle-bearing construction that's little affected by heat or cold, and most are "clockable" for multiple choices of solenoid positioning. These starters are recommended for engines over 400 c.i.d., as well as high-compression V8s.
( 35 )
$480.25
Summit Racing™ Run Stand Starter Adapters
Summit Racing™ offers run stand starter adapters for a variety of engine applications—including Ford and Mopar motors from the 1950s and up. Many times, troubleshooting and/or tuning an engine is easiest when the engine is outside the car on a test stand. This allows you to access locations of the engine which are nearly impossible to reach otherwise. The starter adapter enables you to mount the starter to the engine in order to monitor and diagnose issues while the engine is running. Order the adapter recommended for your particular engine.
( 8 )
$27.99
On Sale
MSD DynaForce Starters
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 242 )
$614.95
$399.70
—
$614.95
Powermaster Mastertorque Starters
With their gear-reduction drives, heavy-duty PowerMaster Mastertorque starters really crank out the power--180 lb.-ft. of torque. So they can handle engines with compression ratios as high as 14.0:1. If your stock starter clears your oil pan, they will, too. Some will also clear kicked-out pans. A selection of Mastertorque starters can be mounted in multiple orientations, and some will work inverted with the solenoid down. They feature a black wrinkle finish and select models are available in a chrome plated finish.
( 627 )
$186.99
—
$214.99
Powermaster PowerMax Starters
With their gear-reduction drives, heavy-duty Powermaster PowerMax starters really crank out the power--180 lb.-ft. of torque. So, they can handle engines with moderate compression ratios. If your stock starter clears your oil pan, the Powermaster PowerMax starters will, too. Some will also clear kicked-out pans. Powermaster PowerMax starters can be mounted in multiple orientations to fit your needs. Starter dyno reports are included.
( 1162 )
$147.99
—
$281.99
Powermaster Ultra Duty Diesel Starters
Upgrade your existing starter's performance with a new Powermaster Ultra Duty Diesel starter. These starters are stronger, faster, and tougher! They are able to turn over the most aggressive diesel engines in the harshest of environments. Featuring a 3.80:1 gear reduction, 260 ft. lbs. of torque and 3.6 horsepower these Powermaster Ultra Duty Diesel starters can handle anything.
( 249 )
$224.99
—
$250.99
Powermaster XS Torque Starters
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 911 )
$219.99
—
$373.99
Summit Racing™ Protorque Starters
Summit Racing™ Protorque Starters are 100 percent new! Our lightweight Nippondenso-type starters offer a 4.0:1 gear-reduction ratio and a whopping 1.9 HP. That's 222 ft.-lbs of racecar cranking power. If that's not enough cranking power to suit you, there are even more powerful 3.1 hp monsters, which are a pound lighter! They have a 4.44:1 reduction ratio and churn out an awesome 342 ft.-lbs. of torque. Both of our Summit Racing™ powerhouses are suitable for engines up to 502 c.i.d., and compression ratios of up to 18.0:1. GM versions are adjustable for five mounting positions; Ford types, for 18. And, to prevent corrosion and electrical shorts, both starters wear a gold dichromate finish.
( 605 )
$235.99
—
$315.99
Ford Performance Parts Starters
Ford Performance Parts mini high-torque starters are a great addition to your car. They feature a high-output motor with internal gear reduction that provides more cranking power than stock, yet is 30 percent smaller. Their smaller size brings the weight down 5 lbs. from OE starters and provides a great deal more header clearance. These are the perfect starters for vehicles with high-compression engines and tight-fitting headers.
( 83 )
$251.99
—
$432.99
Powermaster Ultra Torque Starters
Powermaster Ultra Torque starters live up to their name by delivering 250+ ft.-lbs. of torque. They feature a machined aluminum adjustable mounting block, work with most oversized kickout oil pans, and work great for big cubic inch engines. The starters use a 2.5 kW, in a 3.4 hp motor.
( 246 )
$275.99
—
$403.99
Powermaster Vintage-Torque Starters
Old on the outside--new on the inside! Get the correct vintage look and modern performance, with Powermaster Vintage-Torque starters. They offer a more powerful, lighter weight option for your flathead Ford V8 engine, so you can keep the factory look and get better starts. These starters are designed to bolt-up the same as the original starter and come complete with the starter drive. Be the master of your own domain with Powermaster starters.
( 11 )
$320.99
Motorcraft Starter Solenoids
When your engine refuses to turn over, it could be time for one of these Motorcraft replacement starter solenoids. Made to fit, they plug directly into the starter circuit and are designed to activate your motor, push the starter Bendix gear into the ring gear, and deliver quality performance. Motorcraft starter solenoids offer the best fit for your Ford, Mercury, and Lincoln vehicles.
( 40 )
$26.99
Scott Drake Starter Solenoids
Scott Drake starter solenoids will get the current flowing to start your engine in motion. They offer a selection of solenoids to fit your classic's needs. Whether you're looking for Concours quality with authentic markings and logos or just a good quality aftermarket unit, Scott Drake has the starter solenoids to fit your ride and your wallet.
( 24 )
$14.59
ACDelco Starters
When you turn the key and your vehicle is slow to turn over—or worse, there's no ignition at all—one of the prime suspects is a faulty starter. Getting the engine up and running for each drive begins with this unit, so it's wise to trust your replacement parts to ACDelco. The aftermarket parts giant manufactures starters to precise OE specifications for perfect fit and performance on virtually any vehicle on the road today. Don't wait until a weak, aging starter fails completely; install an ACDelco product …and turn the key with confidence!
( 227 )
$40.99
—
$113.99
CVR Protorque Maximum Starters
CVR Protorque Maximum starters with 3.1 hp and a 4.44:1 gear reduction ratio are sure to get your engine cranking with ease. They feature a unique aluminum housing to eliminate hot start problems and are adjustable (where applicable) to help clear suspension parts, oil pans, and exhaust systems. Protorque Maximum starters are sealed units with rubber O-rings and grommets and also have easily replaceable plungers and contacts.
( 22 )
$283.99
—
$341.99
ACDelco Remanufactured Starters
ACDelco remanufactured starters are 100 percent performance-tested to ensure the ability to start your engine. They're engineered to fit your vehicle and built to provide the same performance, durability, and service life you've come to expect—at a great value! Damaged and obsolete parts are replaced, and the units receive 100 percent new bearings, bushings, and brushes for the ultimate in reliability. Over a thousand models are available; order the starter recommended for your vehicle. Don't wait until a weak, aging starter fails completely; install an ACDelco product … and turn the key with confidence!
( 55 )
$33.99
—
$78.50
Powermaster Ultra Torque High-Speed Starters
Powermaster Ultra Torque high-speed starters deliver 25 percent more cranking rpm at the flywheel than the standard Ultra Torque starters. They are perfect for use in blown alcohol engines, or any engine requiring higher than normal cranking speed. The Powermaster Ultra Torque high-speed starters feature a 2.2 kW, 3.0 hp motor and have a machined aluminum adjustable mounting block. They will fit all oversized and kickout-style oil pans with no clearance problems.
( 30 )
$347.99
—
$372.99
Meziere True Start 400 Series High-Torque Starters
These Meziere True Start 400 series high-torque starters are recommended for all high-compression, large displacement engines up to 700 cubic inches and supercharged applications. They feature custom gear reduction for the best cranking power and rotational speed. Their innovative billet aluminum head design provides the strongest drive gear support without an external nose support. The starter block features a full 360 degrees of clocking positions in 10 degree increments. Meziere True Start 400 Series high-torque starters feature an offset design that clears all kickout style oil pans.
( 17 )
$679.06
Scott Drake Starter Bolts
Scott Drake starter bolts are machined to strict engineering quality standards and serve as direct replacements for installing a factory-style starter in the original factory location. Improve the underhood appearance on your classic Mustang with these steel, zinc-plated bolts with washers. They're not just generic bolts, they're the real deal—and yes, judges do check the details!
( 3 )
$12.86
CVR Protorque Starters
With 1.9 hp and a 4:1 gear reduction ratio, these CVR Protorque starters are sure to get your engine cranking. These starters feature a unique aluminum housing to eliminate hot start problems and are adjustable (where applicable) to help clear suspension parts, oil pans, and exhaust systems. These CVR Protorque starters are sealed units with rubber O-rings and grommets and also have easily replaceable plungers and contacts.
( 162 )
$234.99
—
$276.99
ACDelco Starter Solenoids
ACDelco starter solenoids are a recommended replacement for your vehicle's original solenoid. They relay the electrical current to the starter motor to start your vehicle's engine. ACDelco starter solenoids have been manufactured to fit your vehicle and provide the same performance, durability, and service life you expect from ACDelco.
( 1 )
$26.99
CVR Protorque Ultra Starters
CVR Protorque Ultra starters live up to their name by delivering 250+ lb.-ft. of torque. They feature a specially wound field coil and armature to deliver that torque throughout the cranking range. The machined aluminum adjustable mounting block works with most oversized kickout oil pans, and are great for big cubic inch engines. The starters use a 2.5 kW, 3.4 hp motor that'll support up to 18:1 compression ratio.
( 15 )
$254.99
—
$352.99
On Sale
MSD DynaForce High-Speed Starters
Get your race car going faster with MSD DynaForce high-speed starters! With 25 percent more cranking speed and extreme durability, they will reliably start your stubborn race engine. Designed for engines requiring higher cranking rpm to start, these starters offer 3.73:1 gear reduction. They also feature a heavy-duty, high-temp solenoid for 12 to 16 V systems, a plated disc and contacts to reduce arcing, and an adjustable billet aluminum mounting block. When you need higher cranking speed at the track for your blown alcohol engine or magneto ignition, MSD DynaForce high-speed starters will get you movin'--fast!
( 14 )
$767.95
