Availability
Showing In Stock Items. Show All 26 Items.
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 93 )
$1,449.95
—
$1,499.95
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,199.95
American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location
( 551 )
$1,047.85
—
$1,387.00
On Sale
The Edge EZX module with Insight CTS3 is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed, helping to keep your warranty intact. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also enables you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. For the absolute best driving experience, pair EZX with the Edge Insight CTS3 to stayed informed of everything going on under the hood. EZX + Insight CTS3 kits give you everything you need to stay 'in the know,' including vehicle-specific A-pillar display mounts for factory fit and finish. Product features: * All-new EZX module and downloadable smartphone app * Insight CTS3 offers you the visibility to always know what going on under the hood * Includes vehicle-specific A-pillar mount for sleek OE styling and perfect CTS3 positioning * The EZX will allow you to control Power Levels and Engine High Idle through your steering wheel controls on-the-fly. All other features are controlled, enabled/disabled, or adjusted through the smartphone app.
( 1 )
$1,119.95
—
$1,299.95
Optimize your engine for the best performance and operation with our Summit Racing™ Megasquirt Engine Management Combos. These combo kits provide you with the flexibility to precisely tune your engine—which will make a noticeable difference in its attitude from startup to wide-open throttle!
( 1 )
$1,098.97
On Sale
Increased fuel mileage and horsepower are just two of the benefits your big rig will realize with a Bully Dog heavy-duty GT diesel tuner. These computerized units combine diagnostics, gauges, data displays, and engine control programming to monitor nearly 20 truck functions. With up to 12 percent savings in fuel economy, Bully Dog tuners can pay for themselves in a matter of months. Users also report better throttle response, steady pulling power, and cooler operation. You can customize your diesel for more power or economy; the possibilities are endless. Install a GT diesel tuner and experience the savings and performance of a premier big rig ECM programmer! Here are a few more features of the Bully Dog system: * Increase of up to 100 hp (specialized tuning for additional power) * Up to 12 percent increase in fuel economy * Speed limiter adjustments * Diagnostic reader * Driving coach * Watchdog monitoring
Not Yet Reviewed
$1,298.00
$1,168.20
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,499.99
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$1,249.95
COBB Tuning Ford Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Ford ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Ford Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Ford specific features: * Adjustable Traction Control: Adjust target slip on the fly and maximize grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level * Launch Control: Adjust on the fly with six pre-configured RPM slots based on track conditions and vehicle configuration * Change Map Slot: Allows instant changes to several calibration tables without re-flashing the ECU; each map slot is in a folder in the Map Switching Features group
( 7 )
$1,195.00
Get Ford Coyote twin independent variable cam timing (Ti-VCT) control from Holley EFI. Do you have a Coyote crate engine going in your dream car? Is your weekend road race warrior powered by a Coyote junkyard engine with locked cams? Unlock the full potential of your high-revving power plant with the Holley EFI plug-and-play Coyote Ti-VCT control module! Product features: * Compatible with HP or Dominator EFI * Ti-VCT cam control down to 400 rpm * User-programmable tables enable end user to fine-tune aftermarket Ti-VCT-compatible camshafts * Commanded timing matched within 1 degree * 4 built-in diagnostic LEDs make diagnostics easy in the event of a cam or crank sensor failure * Integrated stock cam position tables eliminate tuning guesswork; optimal drivability and power right out of the box * Main harnesses come terminated with Ford TPS and IAC connectors—making it easy to convert from a DBW throttle body to a manual throttle body, if desired * Installation of an external MAP sensor is required (Holley MAP sensors recommended for naturally-aspirated applications) * Main harnesses include a power tap connector as a convenient source for power and grounds when adding additional sensors or actuators * CANBus communication between Coyote Ti-VCT and Holley EFI ECU for high-speed data transfer and diagnostics * Pre-calibrated Ford sensor drop-downs in the Holley EFI software * Plug-and-play main harness for 2011-17 Coyote engines with stock camshafts using stock coils or Holley EFI Smart coils (Holley EFI systems main wiring harnesses)
Not Yet Reviewed
$1,349.95
Kleinn direct-fit train horn and onboard air systems include a train-style triple horn system and a high-output waterproof air compressor. They also feature custom designed bolt-on mounting brackets and a remote mount quick-connect tire inflator system. Find out why Kleinn Automotive Accessories are a leader in air horn and related pneumatic accessories for cars, trucks, SUVs, and everything else with a 12- or 24-volt power source when you order the Kleinn direct-fit train horn and onboard air system best suited for your application. More product features, items, and specifications include: * High-output, 100 percent duty cycle, waterproof air compressor (6530RC or 6450RC -application dependent) * Air tank (1 1/2-gallon or 3-gallon -application dependent) * Model 730 Demon black triple train horn produces a thundering 157.89 decibels (SDKIT17734 only) * Model 230 Beast black triple train horn produces a thundering 154.3 decibels * Remote mount quick-connect tire inflator with 30 ft. hose and storage bag * Spare tire location horn mount (spare tire removal required - SDKIT17734 only) * All necessary components needed for installation * Illustrated step-by-step instructions
Not Yet Reviewed
$1,029.95
—
$1,529.95
Kleinn offers their Demon train air horn kits that include several massive, detachable black spun steel trumpets (730 Series) in three different sizes for that authentic locomotive blast sound! These packages are designed to power your horns and other accessories, like air bags and small tools, with the included high output, 100 percent duty cycle air compressor, air tank, and tire inflation kit. Want it louder? You can upgrade by adding their 6890 Ultra BlastMaster valve (sold separately), which will make the trumpet horns the loudest, largest, and most aggressive train horns you have ever heard. They will definitely hear you coming when you order The Demon bolt-on air horn kit best suited for your application. More product features, items, and specifications include: * Compressor model 6450RC * Demon 730 Series black triple train horns capable of 157.8 decibels * Air tank (3-gallon; 6350RT or 6351RT depending on application) * Black powdercoated mounting brackets * Remote mount tire inflator system (INF-1) * All necessary installation components * Illustrated step-by-step instructions
Not Yet Reviewed
$1,299.95
—
$1,599.95
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$1,148.99
Dead speed sensor? Swap it out for new Motorcraft replacement speed control sensors--an affordable solution. They are crafted to stringent OE standards to provide exact vehicle-specific fit and functionality. Motorcraft--their name says quality, dependability, and performance parts.
( 2 )
$1,122.99
Make it louder with The Beast bolt-on air horn kits by Kleinn! They feature a triple-threat of tuned, high-impact black ABS train horns on a flat rack mount, which means they require up to 40 percent less clearance than other full-size horns. The trumpets can be separated from the rack for easier installation and they are always ready to blast thanks to a full onboard air system with a 100 percent duty cycle air compressor and three-gallon steel air tank. They also feature a tire inflation kit with a storage bag that allows you to power your horns and other accessories, like air bags and small tools. Basic hand tools are all you will need to install your own 100 percent bolt-on "Beast" air horn kit with model-specific brackets for the tank, compressor, and trumpets. Order the Kleinn air horn kit designed for your application. More product features, items, and specifications include: * High-output, 100 percent duty cycle, waterproof air compressor (6530RC or 6450RC -application dependent) * Air tank (3-gallon) * Model 230 Beast black triple train horn produces a thundering 153.3 decibels * Tire inflator with couplers and storage bag (not for use with aftermarket power side steps) * Vehicle-specific, powdercoated mounting brackets * All necessary components needed for installation * Upgradeable for louder blasts with BlastMaster air valve kit for a blistering decibel level * Illustrated step-by-step instructions
Not Yet Reviewed
$1,139.95
FAST XIM ignition modules are an easy and effective way to install your FAST XFI fuel injection system on your distributor-less, ignition-type EFI engine. These modules are available alone or in an ignition kit with a wiring harness included. The installation is a simple plug and play with factory-type connectors to plug into the factory sensors. You're ready for XFI fast with FAST XIM ignition modules.
Not Yet Reviewed
$1,115.95
Dorman cruise control distance sensors are designed to match the fit and function of the original sensor on specified vehicles, and are engineered for durability and reliable performance. These replacement sensors restore functionality for an original part that has failed from an electrical malfunction or collision. Order the model recommended for your application.
Not Yet Reviewed
$1,016.99
—
$1,254.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
