FORD Engine Assemblies Engines & Components - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

BluePrint Engines Ford 302 C.I.D. 361 HP Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.

4.55 out of 5 stars ( 11 )

$6,899.00

—

$9,499.00

BluePrint Engines Ford 302 C.I.D. 361 HP EFI Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 361 HP EFI dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes: * Front sump oil pan * Valve covers * Timing cover * EFI * Standard rotation water pump * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine

Not Yet Reviewed

$7,999.00

—

$10,599.00

BluePrint Engines Ford 347 C.I.D. 415 HP Dressed Stroker Long Block Crate Engines

Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp dressed stroker long block crate engines are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * New BluePrint cast iron block * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast steel crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * Dual plane, satin aluminum intake manifold * Carburetor * Distributor * Valve covers * Painted oil pan

4.5 out of 5 stars ( 8 )

$8,199.00

—

$10,799.00

BluePrint Engines Ford 408 C.I.D. 450 HP Stroker Base Crate Engines

BluePrint Engines offers Ford 408 c.i.d. 450 hp Stroker base crate engines—with or without carburetor, distributor, and intake manifold. Here are the basic features and specs: * Horsepower and torque: 450 hp / 470 lbs.-ft. * Compression ratio: 10.0:1 * Hydraulic roller cam * New cast steel crankshaft * Forged pistons * Forged I-beam 6.200 in. connecting rods * Brand new Blueprint engine block * Square and parallel decked * Line honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 straightness and roundness * Cylinders are sonic tested for thickness * 4-bolt main * 4.000 in. bored * One-piece rear main seal * Mech fuel pump provision: Yes * 4.000 in. stroke * External 28 oz. balance front and rear -- CYLINDER HEADS: * Aluminum cylinder heads * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 90cc intake/65cc exhaust runners -- CAM SPECS: * Roller * .579 Intake / .579 Exhaust * 236 Intake / 248 Exhaust duration @ .050 - 114 degree lobe separation -- IGNITION TIMING: * 34 degrees total at 3500 rpm -- ALSO INCLUDES: * Oil pan, dipstick, timing cover and valve covers * Dyno tested and shipped with results * Some models also include carburetor, distributor, and intake manifold

5.0 out of 5 stars ( 1 )

$8,099.00

—

$9,099.00

BluePrint Engines 302 C.I.D. Cruiser Base Crate Engines

BluePrint Engines 302 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 16 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * Cast iron crankshaft * 3.00 in. stroke * OEM 5.090 in. connecting rods * Hypereutectic pistons * 50oz external engine balance Cylinder heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial with 32-34 degrees total Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine

Not Yet Reviewed

$6,299.00

ATK High Performance Ford 302 300 HP Stage 2 Long Block Crate Engines

Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 2 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate

5.0 out of 5 stars ( 4 )

$4,210.99

ATK High Performance Ford 302 Stock Drop-In Long Block Crate Engines

Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.

3.94 out of 5 stars ( 32 )

$3,998.99

BluePrint Engines Ford 347 C.I.D. 415 HP Base Stroker Long Block Crate Engines

Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp base stroker long block crate engines. They are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * 10 to 1 compression * Valve covers * Painted oil pan * Brass freeze plugs

2.0 out of 5 stars ( 4 )

$7,499.00

BluePrint Engines Ford 302 C.I.D. Bronco Edition 365 HP Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. Bronco Edition 365 hp long block crate engines are available with a carbureted or fuel injected system. The base dressed engines are loaded with impressive features: DESCRIPTION: * Horsepower and torque: 365 hp / 365 lbs.-ft. * Compression ratio: 9.5:1 * Aluminum heads * Hydraulic roller cam * Cast steel crank * Hypereutectic pistons BLOCK: * NEW BluePrint cast iron block * 4-bolt main * 4.000 in. bore * 1-piece rear main seal ROTATING ASSEMBLY: * Cast steel crankshaft * 3.000 in. stroke * OEM type 5.090 in. connecting rods * Hypereutectic pistons * 50 oz. external balance CYLINDER HEADS: * BluePrint aluminum cylinder heads - HP9009 * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners CAM SPECS: * Cam type: Roller * .533 Intake / .544 Exhaust * 215 Intake / 220 Exhaust duration * @ .050 - 114 degree lobe separation IGNITION TIMING: * 10-16 degrees initial, 32-34 total ALSO INCLUDES: * Bronco script valve covers * Harmonic balancer * Dual plane satin aluminum intake manifold * 600 cfm carburetor (model BP302MAXCTC) …. Or …. EFI system (model BP302MAXCTF) * Distributor * Painted oil pan NOTES: * Painted Ford Blue * Recommended break in oil for your BluePrint crate engine: BPP710 * Not for EGR * Engine timing cover is designed for standard rotation water pump ONLY * Valve cover breather not included. BluePrint Engines recommends PN B6AZ-6766-B * On EFI model: Holley Sniper EFI is NOT compatible with AOD trans. It does NOT have AOD kickdown lever.

Not Yet Reviewed

$7,799.00

—

$8,899.00

Ford Performance Parts 2024 7.3L Super Duty Long Block Crate Engine

Ford Performance Parts 7.3L V8 Ford gasoline crate engine from the 2024 F250 Super Duty is loaded with great features for your build. Features: * 7.3L displacement * Bore 107.2mm x stroke 101.0mm * 430 hp at 5,500 rpm * 485 lb.-ft. of torque at 4,000 rpm * 10.5:1 compression * Cast iron block * Aluminum cylinder heads * Intake valve diameter 55.13mm * Exhaust valve diameter 42.53mm * Lift (intake/exhaust) 13.67mm/15.26mm * Cam-in-block OHV design with variable cam timing * Forged steel crankshaft * Cast aluminum pistons * Port fuel injection * Firing order: 1-5-4-8-6-3-7-2 Each engine assembly includes: * Composite intake manifold * 87mm throttle body * Left and right exhaust manifolds * 8-qt. aluminum oil pan/cooler * Ignition coils and wires * Production flexplate * Factory lift brackets * M-6038-73 shipping and storage cradle * Bellhousing bolt pattern same as 4.6/5.4 and 5.0 Coyote * Engine weight: 580 lbs.

Not Yet Reviewed

$8,749.99

Ford Performance Parts 302 C.I.D. 340 HP Boss Long Block Crate Engines

Ford Performance Parts 302 c.i.d. 340 hp Boss long block crate engines feature Ford's X2 cylinder heads packaged with the legendary "E" camshaft for use with automatic or manual transmissions. Utilizing forged internals, the X2302E long blocks deliver excellent value and are solid foundations for any performance combination, including forced induction. These crate engines feature race-quality components at competitive pricing. Features and specs for these Ford Boss long block crate engines include: * 302 cu. in. * 340 hp * 9.0:1 compression ratio (nominal) * Forged pistons * Forged steel connecting rods * BOSS 4-bolt main block * Hydraulic roller camshaft, .498 in. lift intake and exhaust, duration at .050 in. is 220 degrees intake and exhaust * Double roller timing chain set * Forged steel crankshaft * Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks (rear sump pan fits most Fox body cars) * Ford Performance aluminum X2 cylinder heads * Roller rocker arms * Rear sump oil pan and pickup, standard rotation timing cover, reverse rotation water pump, and non-EFI valve covers * Fuel pump eccentric installed * Built with all new parts

2.0 out of 5 stars ( 1 )

$10,230.00

BluePrint Builder Series 302W/365HP Bronco Edition EFI Crate Engine and 4R70W Transmission Combos

BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 302 (c.i.d.) engine that produces 365 horsepower, this Bronco edition builder series includes a black pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 365 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Bronco, go with the authority in crate engines and their BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Main caps are 4-bolt * Bore is 4.000 in. * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. (and OEM-style 5.090 in. connecting rods) * Hypereutectic pistons * Externally balanced BPP50 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 60cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.533 in. * Exhaust valve lift – 0.544 in. * Intake duration at 0.050 in. of lift – 215 * Exhaust duration at 0.050 in. of lift - 220 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4WD-ready 4R70W Transmission (built to 650 horsepower): * Sniper Electronic transmission controller and TPS breakout harness for integration with controller * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This 4-speed overdrive transmission with lockup is specifically prepped for a 1966-76 Dana 20 transfer case (sold separately) * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Distributor * Valve covers * Rear sump oil pan * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) Note: Not intended for use in controlled vehicles. Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.

Not Yet Reviewed

$20,899.00

ATK High Performance Ford 302 300 HP Stage 1 Long Block Crate Engines

Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 1 long block crate engines and give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 1 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

4.33 out of 5 stars ( 12 )

$3,639.99

Ford Performance Parts 572 C.I.D 655 HP Long Block Crate Engines

Big blocks are back! Ford Performance Parts 572 c.i.d. 655 hp long block crate engines are, once again, ready to make impressive power with excellent drivability—while utilizing premium, unleaded pump gas. They're available with front or rear sump pan. Specs for the Ford 572 c.i.d. long block crate engines: * 655 hp at 5,500 rpm * 710 lbs.-ft. torque at 4,500 rpm * Engine type: 385 Series big block * Bore x stroke: 4.500 in. bore x 4.500 in. stroke * Ford Performance A460 big block * Forged steel crankshaft * Forged steel H-beam connecting rods and bolts * Pistons with floating wrist pins * Hydraulic roller camshaft - Lift: .649 in. - Duration: Intake--259 degrees at .050 in. lift/exhaust--263 degrees at .050 in. lift * Ford Performance aluminum cylinder heads - Dual valve springs with damper - Stainless steel 2.20 in. diameter intake valves - Stainless steel 1.76 in. diameter exhaust valves * Compression ratio: 10.0:1 (nominal) * Required fuel: Premium unleaded * Stainless steel roller rockers * Multi-index timing chain set * Heavy-duty, aluminum body oil pump * SFI-approved vibration damper * Front or rear sump oil pan * Intake manifold * 870 cfm carburetor * Distributor * High performance water pump * Ford Performance Blue 9mm spark plug wires * Note: Built with current available parts

Not Yet Reviewed

$18,367.50

Ford Performance Parts 5.0L Gen 3 Aluminator Short Block Crate Engines

Ford Performance Parts 5.0L Gen 3 Aluminator short block crate engines are hand assembled using quality high-performance internal parts. Offered in two compression ratios, they serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application and needs. Ford Performance engineers have taken care of the toughest part of building a new engine by designing a strong and durable short block that offers a wide range of power possibilities. Additional features and specifications: * 5.0L (302 cu. in.) * Precision internal balanced * Available in 12.0:1 or 9.5:1 compression ratio * Forged steel crankshaft * Mahle hard anodized forged pistons with Grafal low-friction coating * Manley H-beam connecting rods with ARP2000 bolts * 2018+ (Gen 3) production block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength * Accepts Gen 1, 2, 3 or GT350 cylinder heads with corresponding generation head gasket * Assembled and ready for Coyote heads, cams, timing set, and oil system

Not Yet Reviewed

$5,947.99

—

$7,152.99

ATK High Performance Ford 347 Stroker 410 HP Stage 1 Long Block Crate Engines

Experience the power of a stroker with ATK High Performance Ford 347 Stroker 410 hp Stage 1 long block crate engines. They are hand-built and balanced to ensure that they are rock-solid and reliable, and yet produce a power curve like only a stroker can. Boasting 410 hp and 415 ft.-lbs., these engines are capable of giving your muscle car, pickup, or street rod the power it needs to dominate the street or strip. ATK Ford 347 Stroker 410 hp Stage 1 crate engines include: * Handpicked, remanufactured blocks * Performance aluminum cylinder heads * Nodular iron crankshaft and I-beam connecting rods * Forged pistons * Hydraulic roller camshaft * Cam lift- .512 int./.512 exh. * Cam duration at 0.50- 220 int./224 exh. * 10.2:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube available in fox body and front sump designs.

5.0 out of 5 stars ( 3 )

$5,803.99

—

$5,810.99

Ford Performance Parts 427 C.I.D. 535 HP Long Block Crate Engines with Z2-Series Cylinder Heads

Drop a Ford legend reborn into your project and experience the power of Ford Performance Parts 427 c.i.d. 535 hp long block crate engines. Built on Ford's Boss 351 blocks, these American-made engines are designed to provide you with big performance in a small block package, along with great drivability. The iconic 427 c.i.d. displacement, but on a Windsor platform—they offer all the powerplant you want at a price that you'll love! Technical information: * 535 hp at 5,600 rpm * 545 lbs.-ft. of torque at 4,500 rpm * Engine type: 351 based small block Ford * 4.125 in. bore x 4.00 in. stroke * 9.5 in. deck height Boss 351 block * SCAT forged steel crankshaft * SCAT forged steel H-beam connecting rods with ARP bolts * Mahle forged pistons with floating wrist pins * Hydraulic roller camshaft * Camshaft lift: .594 in. intake/.618 in. exhaust * Camshaft duration at .050 in: 242 degrees intake/248 degrees exhaust * Ford Performance aluminum "Z2" cylinder heads * 2.02 in. intake/1.60 in. exhaust valves * PAC 1219X ovate beehive valve springs * 10.5:1 compression ratio (nominal) * Roller rocker arms; 1.65:1 ratio * Ford Performance SFI-approved vibration damper; may require a spacer for pulley alignment * Cast aluminum, black wrinkle finish, Ford Racing script valve covers; fit most non-EFI applications * Steel oil pan with windage tray and scraper; 9-qt. capacity * Premium unleaded fuel recommended * Ignition timing: 32 degrees at 4,000 rpm * 5,600 maximum recommended rpm * Internally balanced; use neutral balance flywheel (not included) * Edelbrock Super Victor intake manifold recommended (not included) * Intake gaskets and pilot bearing included * Standard rotation water pump included * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed, allows use of mechanical fuel pump * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor not included * MSD distributor recommended (modifications for intake clearance necessary) * Steel distributor gear required * Built with currently available parts * Photo and specifications may vary * Available in front or rear sump configurations

5.0 out of 5 stars ( 2 )

$12,159.09

Ford Performance Parts 363 C.I.D. Boss Short Block Assemblies

Start with the right foundation for your Blue Oval build--start with Ford Performance Parts 363 c.i.d. Boss short block assemblies. Build a powerful 8.2 in. deck engine for your vintage muscle, street rod, Fox body, or late model Mustang by starting with the same short block used in the 500 hp Z363 crate engines. These Ford Performance Parts Boss short block assemblies take the bore out to 4.125 in. for 363 stroked cubes of power. Plus, strength from within is provided by the forged crankshaft and I-beam connecting rods. Power your next project with Ford Performance Parts 363 c.i.d. Boss short block assemblies. Additional technical specifications: * Engine type: 302 based small block Ford * Bore x stroke: 4.125 in. bore x 3.400 in. stroke * Block: Boss 4-bolt main block M-6010-BOSS302 * Piston to Deck Height: .01 in." below deck (nominal) * Crankshaft: SCAT forged steel * Connecting rods: SCAT forged steel I-beam connecting rods with floating pins and ARP bolts * Pistons: Mahle forged aluminum, 1.5mm, 1.5mm, 3.00mm rings, valve reliefs for X306, X307, Z304DA, Z304P, N351, and other inline valve Windsor cylinder heads * Pistons designed for 20 degree valve angle heads and will fit stock or most spread valve guide centerlines; 6cc valve pockets, check piston to valve clearance * Compatible with most aftermarket performance cylinder heads * Designed for M-6049-X306//X307/Z304DA/Z304P and N351 cylinder heads. Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Hydraulic roller camshaft compatible * Recommended cylinder head fasteners M-6065-BOSS head bolts or M-6014-BOSS studs depending on application * Requires head gaskets M-6051-R351 * Internally balanced; requires "0" balance flywheel and damper * High performance harmonic balancer M-6316-D302 recommended * High-volume oil pump M-6600-D2 recommended * 302 bolt pattern oil pan and timing cover * Built with all new parts * Photo and specifications may vary

3.67 out of 5 stars ( 3 )

$6,005.99

BluePrint Engines Ford 302 C.I.D. 365 HP Base Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 365 hp base dressed long block crate engines are a fantastic swap option. Here are the specifications: -- 365 hp / 365 lbs.-ft. torque -- Compression ratio: 9.5:1 -- Aluminum heads -- Hydraulic roller cam -- Cast steel crank -- Hypereutectic pistons * BLOCK: New BluePrint cast iron block 4-bolt main 4.000 in. bore 1-piece rear main seal * ROTATING ASSEMBLY: Cast steel crankshaft 3.000 in. stroke OEM-type 5.090 in. connecting rods Hypereutectic pistons 50 oz. external balance * CYLINDER HEADS: BluePrint aluminum cylinder heads 60cc chamber 2.02 in. intake/1.60 in. exhaust valves 190cc intake/60cc exhaust runners * CAM SPECS: Cam Type: Roller .533 Intake / .544 Exhaust 215 Intake / 220 Exhaust duration @ .050 - 114-degree lobe separation * IGNITION TIMING: 10-16 degrees initial, 32-34 total * ALSO INCLUDES: Bronco Script valve covers Harmonic Balancer * NOTES: -- Painted Ford Blue -- Recommended break-in oil for your BluePrint crate engine: BPP710 -- Not for EGR -- Engine timing cover is designed for standard rotation water pump ONLY -- Valve cover breather not included. BluePrint Engines recommends PN B6AZ-6766-B or similar

Not Yet Reviewed

$7,199.00

ATK High Performance Ford 351W 300 HP Stage 1 Long Block Crate Engines

Bring your old car or truck back to life with ATK High Performance Ford 351W 300 hp Stage 1 long block crate engines. These engines are built by hand by true craftsmen to ensure a strong-running, reliable engine for your daily driver or hot rod. These engines come ready for you to install your choice of finishing touches, so you can get back out on the road. More product features, items, and specifications include: * Seasoned OE-style roller block (1987-95; 300 hp, 377 torque; 4.060 in. bore x 3.500 in. stroke) * OEM E7TE cast iron cylinder heads (1.77 in. intake/1.46 in. exhaust) * OE-style connecting rods and crankshaft (one-piece rear main seal; 28 oz. balance) * Hypereutectic pistons (9.1:1 compression ratio) * Hydraulic roller camshaft Camshaft ---220/224 Intake/Exhaust Duration at 0.050 in. Lift ---0.512 in. /0.512 in. Intake/Exhaust Valve Lift with Factory Rocker Arm Ratio ---112 degrees LSA (Lobe Separation Angle) * Moly-style piston rings * Timing cover * Oil pan (rear sump truck) and oil pump (Melling standard volume) * Stamped steel 1.6 ratio rocker arms

3.4 out of 5 stars ( 5 )

$3,841.99

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.81 out of 5 stars ( 72 )

$2,182.99

—

$8,139.99

ATK High Performance Ford Truck 302 Drop-In Long Block Crate Engines

ATK High Performance Ford Truck 302 drop-in long block crate engines are fully dressed with moderate horsepower and torque based off the 64-86 Ford 302 engine. These Stage 3 engines typically make about 230 hp on the dynamometer. Engine specifications: * Block: seasoned OE non-roller block * Bore/Stroke: up to 4.060 in. x 3.000 in. * Displacement: 302 c.i.d. * Crankshaft: OE one-piece seal, external balance 50 oz. * OE powder metal connecting rods * Pistons: cast aluminum * Piston rings: chromoly * Compression Ratio: 8.6:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: 192/183 at 50, .380/.395 111LSA * Double roller timing chain * Cylinder heads: OE cast iron * Stamped steel 1.6 pedestal mount rocker arms * Oil pan: rear sump truck

Not Yet Reviewed

$3,998.99

ATK High Performance Ford 302 375 HP Stage 2 Long Block Crate Engines

Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 2 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 680 cfm carburetor * Mechanical 80 GPH Fuel pump * 2,400-2,800 Stall converter * 91 plus octane fuel

3.0 out of 5 stars ( 2 )

$5,866.99

ATK High Performance 1988-92 Ford 460 Short Blocks

Start your next engine build off the right way with these ATK High Performance 1988-92 Ford 460 short blocks. ATK hand-builds, balances, and blueprints these engines to ensure that they are a smooth-running, reliable base for your next engine. These short blocks are prefect for building replacement motors for your car, truck, or hot rod. These ATK High Performance 1988-92 Ford 460 short blocks include the following: * Handpicked and seasoned block * Aligned and honed main bores * OE cast crankshaft * 3.85 in. stroke * OE connecting rods * Hypereutectic D-cup pistons

4.0 out of 5 stars ( 5 )

$1,715.99