Availability
Showing In Stock Items. Show All 59 Items.
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 176 )
$245.95
—
$553.95
GMB OE replacement water pumps are precision-built and balanced to meet or exceed original equipment specifications. They're assembled with heavy-duty steel bearings—and are lubricated and sealed for life. Order the model designed for your vehicle application. All GMB water pumps are factory-tested for quality and include the following features: * High-flow design for long-lasting, efficient cooling * Designed for OE fit and performance * Precision-ground shaft and hub accept OE fan clutches perfectly * OE-quality forged housing is specially formed to ensure maximum coolant flow * Pressed-on impeller increases water flow * Unique no-sealant-required gasket makes installation fast and easy * Unitized seal protects bearings for long life and leak-free performance * Factory-sealed, precision-ground, one-piece bearing assembly
( 532 )
$43.99
—
$286.99
Four Seasons electric water pumps are designed to replace the original equipment auxiliary or inverter cooling pump on your vehicle. These pumps are tested and inspected before they ever go out the door, and are assembled to match OE in fit and performance. Dozens of models are available for hundreds of applications from 1986 and up.
( 1 )
$113.99
—
$219.99
Backed by an industry-leading 125,000 mile warranty, Dayco's water pumps are available in cast aluminum or iron version and are offered in application-specific designs for more than 200 million vehicles in operation. Meeting the highest standards, they are put to the test utilizing a unique failure mode analysis for continuous improvement. In addition, Dayco controls every aspect of the manufacturing process, from raw material to finished product of these OE-equivalent water pumps. Features: * Durable one-piece design * Improved impeller for enhanced performance * Case-hardened roller bearings that allow for flex without breaking * Superior gaskets and unitized seals to prevent leaks
( 3 )
$98.99
GMB high performance water pumps are designed to combat engine overheating associated with higher performance and load applications. They feature a precision-ground, heavy-duty steel bearing that's completely sealed and lubed for life. These replacement pumps have a specially modified, higher performance impeller that eliminates cavitation at all rpm—and maintains maximum volumetric flow of coolant throughout the engine. Order the model recommended for your application. Additional features: * Increase pump pressure up to 300 percent * Eliminate steam pockets trapped inside the engine block * Reduce engine temperature by 15-30 degrees * Help increase horsepower
( 238 )
$62.99
—
$100.99
FlowKooler Hi-Flow mechanical water pumps resolve low-speed heating problems by doubling flow rates at low rpm and idle. CNC precision-machined impellers feature larger diameters, increased vane count, tighter clearances, shrouding, and porting. These unique design features help drop engine temperatures by up to 30 degrees, increase the block pressure to prevent hot spots on cylinder walls, and stop the formation of steam pockets in the block, all while delaying the onset of cavitation at higher rpm. FlowKooler Hi-Flow mechanical water pump impellers are protected from electrolysis and corrosion with a military-grade Type II Class II anodized surface coating.
( 754 )
$148.99
—
$168.99
Meziere 300 Series electric water pumps are the Big Daddy of electric water pumps. They're capable of flowing 55 gpm--enough for a 600 hp oval track car or a 2,200 hp Pro Mod. They have larger internal passages and heavy-duty motors and are available in radiator, remote mount, or engine mount versions. These pumps feature CNC-machined aluminum housings, epoxy coated motor windings, an RF suppression circuit, and a one-piece, carbon-ceramic seal.
( 82 )
$400.13
—
$696.09
Tuff Stuff Performance Supercool water pumps create 30 percent more flow to help cool engines under abnormal conditions. Ideal for race applications, these pumps are made from high-quality materials, such as aluminum and iron, and are available in a variety of finishes. Options include short and long style; standard and high-volume flow; clockwise and counterclockwise rotation; and different pilot diameters. Whether you're replacing or upgrading, there's a Supercool water pump for your specific vehicle.
( 420 )
$80.50
—
$296.99
Make sure your intercooler has water flowing through it properly, with assistance from one of the EMP Stewart intercooler water pumps. They're manufactured from quality materials and are built to OEM specifications for a bolt-in installation. Maintain flow and keep your forced engine cool with an EMP Stewart intercooler water pump.
( 4 )
$582.99
Ford Performance Parts mechanical pumps are available in stock volume and Maximum Flow (high-volume) models. Stock volume pumps have an OEM-spec shaft and bearing with a stamped impeller, and are recommended for engines that operate below 6,000 rpm. Maximum Flow pumps feature heavy-duty ball/roller bearings for long life, a CNC-machined, curved vane impeller and billet hub, and distribute the same amount of coolant to both sides of the engine block. That eliminates hot spots, to help your engine produce maximum power without detonation or pre-ignition.
( 16 )
$106.99
—
$396.99
Meziere 100 Series electric water pumps deliver 35-40 gpm of flow. Because they're electric, you won't have the usual horsepower loss at high rpm caused by a mechanical pump's impeller. Plus, their lightweight billet aluminum construction reduces overall engine weight. These pumps also feature CNC-machined aluminum housings, epoxy coated motor windings, an RF suppression circuit, and a one-piece, carbon-ceramic seal. They're available for a wide variety of V8 engines, including LT1 and LS1.
( 89 )
$500.15
—
$508.48
March Performance Ultra Series mechanical water pumps are designed to have maximum flow distribution, and for use with factory alternators, power steering brackets, and March Performance brackets. Each one is made with aircraft quality 6061 T-6 billet aluminum, and is incredibly efficient, built for longevity, and carefully crafted to increase the performance of your cooling system. Offered in different pump rotations, styles, and finishes; select the March Ultra Series pump designed for your engine.
( 11 )
$79.95
—
$174.95
Small block Fords are pretty compact engines. But their accessory drive setup tends to make swapping them into street rods or small engine compartments a little tougher. One of these Ford Performance Parts shorty-style mechanical water pumps will help solve that problem. These V-belt drive pumps are approximately 1.5 in. shorter than stock, allowing more fan and radiator clearance without recessing the firewall. They must be used with Ford Performance Parts Street Rod pulley sets, and the 4-bolt, long-style 3.950 in. harmonic damper.
( 10 )
$199.99
• Milodon’s exclusive high efficiency impeller design is installed into new GMB castings using heavy-duty bearings and large-diameter shafts. It is the impeller that makes the pump work so much better than a standard, stock design water pump. • Milodon water pumps are available in high-volume (steel or aluminum) and standard-volume versions Pumps are direct factory replacements with OEM hose connections and bosses. • These high-volume pumps have a balanced distribution design (equal flow to both sides of the engine block) and a high-efficiency impeller that increases coolant flow up to 30 percent over stock. • These features increase coolant pressure in the block to prevent hot spots and air pockets and improve coolant flow in the radiator. • A high-flow thermostat is recommended when using a high-volume pump.
( 220 )
$88.95
—
$184.95
High performance engines need high performance cooling--these Summit Racing Equipment® electric water pumps will keep that engine chilled after a mechanical pump retires. They are powdercoated for corrosion resistance and can move 35 gpm at 12 V to keep the operating temperature down. Built from aluminum and designed to be lightweight, these pumps are engineered to keep your under-bonnet cool on the track or street. When your mechanical pump falls short, these electric pumps are a great option to keep that performance level, while also being easy to install. They are available for various engine applications--find your engine's best fit and get it back to road-ready in no time.
( 90 )
$150.99
—
$169.99
PRW High Performance mechanical water pumps are engineered to deliver increased water flow faster. These super velocity pumps significantly improve cooling for all street, high performance, and racing applications. The low pressure-injected, A356 aluminum alloy pump bodies are complemented by a precision, high-flow cast iron impeller design. Pressure-balanced water passages equalize flow and minimize engine hot spots at any speed. PRW High Performance mechanical water pumps are excellent alternatives for not only racers, but also trucks, towing, and motorhome applications. Order the model recommended for your specific vehicle and engine size. Features, items, and specs: * 35 gpm at 4,000 rpm with minimal cavitation and proportional increased flow rates at 5,000+ rpm * Aircraft industry tolerances * Heavy-duty 0.75 in. diameter steel shafts * Billet steel hubs and shielded-seal roller ball bearings * Back plate O-ring sealed for most applications * System Basis Chip (SBC) applications include adjustable hardware
( 31 )
$79.87
—
$302.02
Inspired by top Ford 4.6L engine builder Sean Hyland, these EMP Stewart Ford Mustang high performance water pumps fill an industry void of high performance water pumps for this engine. These EMP Stewart pumps are also perfect as cost-effective original equipment replacement upgrades. They are available in both long and short versions fitting either of the 2 or 4-valve 4.6L Mustang powerplants.
( 21 )
$199.95
—
$199.99
On Sale
Frostbite electric water pumps are a must for high performance vehicles where horsepower comes at a premium. They eliminate common issues found in traditional mechanical water pumps--parasitic horsepower loss, heavy cast housings, and impeller drag. Frostbite electric aluminum water pumps are available in black and polished finishes with offerings for popular engine platforms. When it comes to keeping your cooling system performing at peak levels, make it Frostbite! Features include: * Available with cast or billet aluminum housings * Free-up lost horsepower resulting from the use of mechanical pumps * Frostbite logo laser-etched for performance look * Ford applications available with block-off plates * Kits come complete with gaskets, wiring pigtail, and mounting hardware
( 10 )
$549.95
$192.95
—
$493.95
EMP Stewart water pumps are the premier choice of professional engine builders, race teams, and performance enthusiasts. They're great for street rodding and OEM replacement applications and even the most extreme forms of motorsports in the world, including NASCAR Winston Cup and NHRA Pro Stock. These EMP Stewart Stage 1 water pumps use brand new, original equipment castings that are machined to exacting standards. Stage 1 pumps are compatible with stock lines and brackets, but are internally modified for performance and reliability! These pumps are recommended for stock, OEM, or mild performance applications.
( 80 )
$123.99
—
$174.99
CVR Proflo Extreme aluminum electric water pumps provide an outstanding 55 gpm of coolant flow, without sacrificing horsepower! CVR Proflo Extreme water pumps can be mounted on a number of different engines and even in remote locations. These lightweight pumps are CNC-machined from T-6 aluminum and feature a direct-drive motor that draws a minute 6.1 amps. CVR Proflow Extreme water pump assemblies also feature a computer-designed machined billet impeller, a stainless steel shaft, and a carbon ceramic seal that offers a whopping 10,000-hour life expectancy!
( 41 )
$333.99
Oval Track and road racing are murder on engines, especially when it comes to temperature. A Victor series pump will help your engine stay cool. The aluminum pumps distribute water to both sides of the block equally within 1 percent. That helps prevent hot spots, which can cause detonation and pre-ignition. The Chevy pumps also have auxiliary water outlets for use with custom cooling systems. All pumps have heavy-duty ball/roller bearings, a machined cast iron impeller, gaskets, rear cover .100 in. thicker than stock for durability. The Victor series pumps have a black anodized finish.
( 9 )
$352.95
Vintage Air water pump bolts are designed for use on their Front Runner drive systems. They help secure your water pump and other components to the Front Runner, which eliminates all mounting points beyond the engine block. Make your engine swaps easier with the Front Runner and Vintage Air water pump bolts.
Not Yet Reviewed
$9.99
All US Motor Works mechanical water pumps are designed and tested to meet or exceed OEM specifications. Using advanced research, they include efficient impellers, case-hardened bearings, and unitized seals to provide optimum cooling with performance and longevity. Every US Motor Works mechanical water pump is supplied with a quality mounting gasket and other accessories (seals/gaskets) necessary to properly complete the installation. US Motor Works mechanical water pumps feature: * Case hardened bearings that meet specific radial torque and axial load requirements; they have higher load capacities, are tough on the outside, yet flexible on the inside … ideal for withstanding imbalance or vibration * All mounting surfaces are CNC-machined for easy installation, precision sealing, long component life, and maximum efficiency * Inspected and tested to ISO: 9001:2015 standards * Industry-leading metal impeller integration; metal impellers handle more torque and higher temperatures than plastic to improve high-rpm performance and combat failure caused by broken or distorted impellers * Highly durable metal impellers are also chemical-resistant, withstand variables in high-mileage engines, and are better for transit and storage
( 50 )
$37.99
—
$141.99
Top Street Performance high-flow mechanical water pumps provide that extra cooling power your high-performance engine demands, plus they are lightweight and flow at a rate up to 40 percent over stock pumps. All TSP mechanical water pumps are cast from lightweight A356 aluminum and heat-treated to T-6 hardness, which not only provides strength, but aluminum works to manage heat far better than cast iron. Top Street Performance offers these high-flow mechanical water pumps in satin, polished, or chrome finishes. Order the water pump model that is designed to fit your application.
( 18 )
$155.96
—
$254.72
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
