Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Holley Terminator X Engine Control Modules
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$870.95
On Sale
Holley Sniper EFI HyperSpark Distributor Kits
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$1,024.95
$921.95
On Sale
Holley Fox Body Fuel System Kits
Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance
Not Yet Reviewed
$1,075.95
$967.95
On Sale
Holley EFI Coyote Hi-Ram Intake Manifolds
Holley EFI Coyote Hi-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on Ford Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finishes, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The aggressively designed Hi-Ram is constructed in a two-piece design to accommodate for air to water intercoolers and feature up to 20 percent more plenum volume versus Ultra Lo Rams. This manifold design is only offered in an oval throttle body configuration. Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup * Two 1/8 NPT ports on all manifolds. Two 3/8 NPT ports on all manifolds
( 1 )
$921.95
—
$950.95
$821.57
—
$854.95
On Sale
Holley Sniper EFI Conversion Fuel Tanks
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 110 )
$921.95
$828.95
On Sale
Holley SBF Hi-Ram EFI Intake Manifolds with Side-Mount Tops
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,299.95
$877.45
On Sale
Holley EFI Systems Main Wiring Harnesses
Choose EFI main power wiring harnesses from Holley to meet your needs. Several choices are offered—TBI, LS applications, multi-point, and un-terminated harnesses—to feed and carry your engine's electrical supply. Get wired for electronic fuel injection with Holley EFI systems main wiring harnesses.
Not Yet Reviewed
$870.95
—
$972.95
On Sale
Holley EFI Coyote Ultra Lo-Ram Intake Manifolds
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
—
$972.95
$821.57
—
$874.95
On Sale
Holley Ford 7.3L Godzilla Low-Profile Intake Manifolds
Holley's low-profile intake manifold for Ford's 7.3L Godzilla engine, when paired with a 20-340/20-340BK oil pan and accessory drive kit, allows for easy installation into vintage vehicles, kit cars, and other space-restricted applications while retaining the factory hood. The design focus for these manifolds was equal cylinder distribution and great street manners. The low-profile intake manifolds offer a much cleaner alternative to the original plastic intake; they provide anywhere from 2 to 3.5 in. of additional clearance, will correct the OE throttle body angle by 55 degrees, and increase the opening to 92mm. With three throttle body options, sturdy cast aluminum construction, a removable lower panel, and long runners to maintain the 7.3L's already substantial torque offering, this is a must-have for any Godzilla project. Throttle Body Options: * 1) 1986-1993 5.0L Mustang style drive-by-cable throttle bodies * 2) 2020-2023 7.3L drive-by-wire throttle body * 3) 2020-2023 GT500 drive-by-wire throttle body (requires P/N 300-903) Compatible Engine Components: * 1) Factory accessories as well as Holley accessory drives (except for 20-380 and 97-409) * 2) Factory fuel rails and Holley 534-265 / 534-266 billet rails Intake manifold features: * Lower profile (2+ inches) than the OE intake manifold * Sturdy cast aluminum construction that will hold up to the elements and forced induction * Perfect complement to Holley's Godzilla accessory drive and oiling system (20-320 / 20-320BK / 20-340 / 20-340BK) for fitment into tight engine bays * Removable lower intake panel that can be removed for additional porting, nitrous, etc. * Incorporates long runners for solid low-end torque * Includes throttle body gasket and all necessary O-rings and adapters to mount to the engine * Compatible with OE or Holley accessory drives and OE or Holley fuel rails * Corrects OE throttle body angle by 55 degrees * Available in natural or black powdercoat finish
Not Yet Reviewed
$950.95
$854.95
On Sale
Holley EFI Crank Trigger Kits
Holley's EFI crank trigger kits provide accurate crank speed and position signals to Holley EFI systems in the most demanding, high-horsepower, racing applications. The crank position is measured every 10 degrees instead of every 45 degrees, like standard 4-magnet crank trigger systems. Holley's EFI crank trigger kits feature 1/4 in. thick, billet steel, 36-1 or 60-2 tooth-crank trigger wheels with black zinc oxide finish for superior corrosion resistance and striking good looks Other notable features include: * Crank wheels center off of balancer hubs, eliminating the need for centering rings * All billet, 6061-T6 aluminum sensor mounting brackets with "bright-dipped" black anodized finish and laser-etched Holley EFI logo * Custom 3-wire, ferrous-target, Hall-effect sensors with M12 x 1.0mm threads for finer gap adjustment * Grade 8 and mil-spec mounting hardware
( 6 )
$767.95
Holley Ford 351W Hi-Ram EFI Intake Manifold Bases
Holley Ford 351W Hi-Ram EFI intake manifold bases feature runner lengths and tapered cross sections designed to perform well for a wide range of engine combinations. The Holley engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race–bred styling will make bad intentions clear for drag race, muscle car, marine, off–road, sand rails, pulling trucks, track, street rod applications and more! Features include: * Cast aluminum construction * The 351W manifold is available to work with 95mm or 105mm GM LS throttle bodies * EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system * Plenum top gasket-type--3/32 in. round O-ring cord * Manifold is designed for a 9.5 in. deck height * Requires the use of Holley EFI dual sync distributor
Not Yet Reviewed
$972.95
On Sale
Holley EFI Systems Wiring Harnesses
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 32 )
$921.95
$805.95
—
$828.95
On Sale
Holley Sniper EFI Fuel Tank Systems
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$870.95
$782.95
On Sale
Holley Sniper EFI Fabricated Intakes
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$870.95
$782.95
—
$870.95
On Sale
Holley Ford Hi-Ram Carbureted Intake Manifold Bases
Holley Ford Hi-Ram carbureted intake manifold bases have a runner length and tapered cross section designed to perform well for a wide range of engine configurations. Holley's engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! Holley Hi-Ram specs: * Cast aluminum construction * Available in natural or black finish * Plenum top gasket type—3/32 in. round O-ring cord
( 2 )
$767.95
Holley High-Mount Base Accessory Drive Kits
Holley's high-mount base accessory drive kits have everything pulled up and in tighter than other options. The patent-pending accessory drive incorporates the timing cover, water pump, and alternator and can also be configured with A/C and/or P/S if desired. The systems are designed to work with the factory crank pulley, as well as aftermarket damper and pulleys. Accessory drive components in the system can be configured in several different ways. For example, there are alternator options offered for different performance and electrical demands. Also, deleting the A/C and/or P/S are options. These "base kits" supply all but the components with options. If you purchase a "Holley complete kit," all these options are already chosen for the most common, cost-effective combination. Features and benefits: * Fits Ford 7.3-liter Godzilla engine—ideal for engine swaps * Provides additional accessory clearance for swap applications that work with the factory rear sump oil pan * Allows for A/C and/or P/S delete and choice of alternator * Includes new front main seal and installation tool * Works with the original factory crank pulley, as well as aftermarket damper/pulleys * Alternator options do not require the original ECU control to function * P/S pump with the optional external reservoir is ideal for hydro-boost applications * Choose from natural "as-cast" or black finish on the timing cover
Not Yet Reviewed
$767.95
—
$819.95
