Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
On Sale
Holley Sniper OE Style 255 LPH EFI Fuel Pump Modules
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 12 )
$511.95
$459.95
On Sale
Holley Retrofit Engine Oil Pans for GM LS Engines
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 249 )
$449.95
—
$526.95
$403.95
—
$473.95
On Sale
Holley EFI Dual-Sync Distributors
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$511.95
$459.95
On Sale
Holley Sniper EFI HyperSpark Distributors
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$460.95
—
$511.95
$413.95
—
$459.95
On Sale
Holley 525 LPH Fuel Pump Modules
Holley 525 LPH fuel pump modules are designed and engineered to meet the demands of today's high-pressure and high-flow engines with efficiency, reliability, and decades of engineering expertise. These high performance components with OE-quality and fitment in mind will deliver maximum fuel flow throughout a wide pressure range to support major horsepower. Kit includes assembled module, a new filter sock, flange O-ring, and the lock ring to help complete installation into stock fuel tanks. Holley 525 PLH fuel pump module features: * 6061-T6 Aluminum fuel pump module with a 525 LPH (liters per hour) * Sniper pump assembly drops into stock EFI fuel tank on select vehicles * 6AN O-ring outlet and return ports for easy plumbing connections * Can be used with both carbureted and EFI (Electronic Fuel Injection) fuel systems depending on your needs * Supports up to 1200 EFI or 1450 carb (hp at 60 psi at 13.5 V/16.9 amp draw; individual systems will vary based on fuel system design, the regulator type, fuel cell location, etc.) * Flange is bright dip black anodized for corrosion protection from undercar moisture
( 2 )
$441.95
$396.95
On Sale
Holley Sniper Transmission Controller Harnesses
Holley Sniper offers transmission-specific controller harnesses for a variety of GM and Ford automatic transmission models. The plug-and-play harnesses are pre-terminated with j4 connectors. Order the harness recommended for your EFI application.
( 2 )
$299.95
On Sale
Holley Sniper Fabricated Aluminum Valve Covers
Holley Sniper fabricated aluminum valve covers deliver high-end looks without the high-end price! They're constructed from 6061 T-5 sheet aluminum and precision TIG-welded for a proper fit. Plus, they feature thick one-piece CNC billet flanges for superior sealing. Sniper valve covers are available in your choice of natural or black powdercoat finishes, as well as with or without breather openings—and heights to clear most popular rocker arm combinations. Holley includes mounting hardware for quick and simple installation. Order a pair for fitment on your particular engine application.
( 87 )
$286.95
$255.95
—
$262.95
On Sale
Holley Sniper In-Tank Retrofit Fuel Pump Modules
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 29 )
$530.95
$322.95
—
$476.95
On Sale
Holley Sniper HyperSpark Ready to Run Small Cap Distributors
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
$366.41
On Sale
Holley Ignition Coil Driver Modules
Holley ignition coil driver modules are used to drive ignition coil packs. They feature a potted design that allows installation inside the engine compartment. These universal modules include the wiring harnesses and mating pigtails for installation, and are available in 4- and 8-channel quantity options.
( 2 )
$319.95
$287.95
On Sale
Holley EFI 6.86 in. Dash Bezels
Holley EFI 6.86 in. dash bezels are available for muscle car and truck applications. Designed to work with Holley dashes, the bezels are made from a 5/32 in. thick UV-resistant ABS composite material and structurally as strong or stronger than the OEM panels. Holley EFI dash bezels come in a matte black finish that will accent your interior.
( 4 )
$306.95
$276.25
—
$372.95
On Sale
Holley Drop-In Fuel Module Assemblies
Holley drop-in fuel module assemblies cover a wide range of vehicles and performance expectations—including dual pump designs. These replacement assemblies meet the highest-quality standards offered for increased performance and fuel efficiency. Holley drop-in fuel modules are capable of supporting 550-plus horsepower right out of the box! Dozens of models are available, with flow rate options between 50 and 277 gph. Order the fuel module recommended for your vehicle. Features may include: * Plug-and-play wiring harnesses * Integrated fuel storage and filtration technology * Built-in, pre-calibrated fuel level sensors * HydraMat filter (keeps fuel available at the pick-up during radical maneuvers and provides contamination protection) * Most models include sending unit
( 8 )
$460.95
$367.95
—
$460.95
On Sale
Holley Drive-By-Wire Throttle Body Wiring Harnesses
Holley drive-by-wire throttle body wiring harnesses are designed for use with the Holley Dominator ECU, as well as the factory drive-by-wire throttle body. These harnesses feature pre-terminated connections, ensuring true plug-n-play installation.
Not Yet Reviewed
$485.95
$281.95
—
$436.95
On Sale
Holley Ford Modular Ignition Coil Harnesses
Holley products deliver the edge you need over the competition. Their Ford modular ignition coil harnesses offer true plug-and-play performance by using OE-style connectors to hook up to your factory coil packs, sensors, or control unit without any modifications. Among other functions, fully connected ECUs allow you to precisely regulate the fuel and ignition of your engine. These Holley complete harnesses enable applications with a single power adder to accommodate a greater number of controls. Order the model designed for your vehicle/engine.
( 1 )
$255.95
On Sale
Holley EFI Fuel Rails
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$294.95
Holley Crankshaft Trigger Wheels
Get the best possible sensor pickup with Holley crankshaft trigger wheels. These wheels have 60 notches, plus one TDC double notch. They are available in a number of different sizes to support the clearances on different engines from 5 in. to 8 1/2 in. in diameter. The center hole is 1 in. in diameter and may require machining for application.
Not Yet Reviewed
$306.95
On Sale
Holley Mechanical Fuel Pumps
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 358 )
$255.95
Holley EFI Ford Fabricated Hi-Ram Intake Manifold Tops
Holley EFI Ford Fabricated Hi-Ram intake manifold tops are solutions to having limited room in the front of the engine bay. These 4mm thick aluminum plenum tops resemble the older Ford EFI manifolds and allow you to mount the throttle body on the side. This setup will allow for easier fabrication for boosted applications or for just a different look on your Hi-Ram manifold. Designed to mount on Holley's existing Hi-Ram manifold bases, they are available in silver or black finishes in throttle body patterns of either 95mm and 105 mm sizes.
Not Yet Reviewed
$460.95
—
$485.95
Holley Ford Coyote TI-VCT Sub Harnesses
Holley EFI Ford Coyote Ti-VCT sub harnesses interface a Holley EFI ECU to a Ford Coyote engine that will utilize a Holley Twin Independent Variable Cam Timing (Ti-VCT) controller. Together along with the Coyote main harness (not included), you'll be able to unlock the full potential of your high-revving power plant. These plug-and-play sub harnesses are designed specifically for Coyote engines.
Not Yet Reviewed
$278.95
—
$409.95
On Sale
Holley Sniper Throttle Bodies
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 40 )
$368.95
—
$374.95
Holley Ford 7.3L Godzilla Alternator Kits
The factory alternator on the 2020 and up Ford 7.3 L Godzilla engine is a bulky single or dual alternator design that is tough to package in an engine swap. The Holley Ford 7.3L Godzilla alternator kits provide a more compact solution for extra clearance and works with the factory timing cover, water pump, damper/crank pulley, and intake manifold. They also will work with after-market damper/crank pulley. The bracket and alternator are compact and lightweight, and the Holley alternator is easy to wire and does not require the factory ECU to function like the OE alternator. Holley includes the plug/pigtail, pulleys, and belt in a complete kit. Please note the included belt is for alternator-only applications, but the instructions specify the belt for other configurations. The bracket allows for any accessory configuration, and it works with or without the air conditioning compressor and with or without a power steering pump. Features and details: * Alternator kit and mounting bracket for Ford Godzilla 7.3-liter engine swaps * Great solution with everything needed to add an alternator to the Ford 7.3-liter crate engine * Eliminates bulky dual alternator system—factory setup on some heavy-duty trucks * Works with the factory timing cover, water pump, damper/crank pulley, and intake manifold—also works with after-market damper/crank pulley * Compact design with alternator pulled in tight to the engine for extra clearance under the hood * The mounting bracket is compatible with Holley alternator models: PN: 197-300, 197-301, 197-302, and 197-303 * Easy wiring of alternator and does not require factory ECU to excite alternator—wiring pigtail included * Choose from a complete kit with 105-amp Holley alternator (PN: 20-380), or bracket kit (PN: 97-409) * Natural as cast finish on the mounting bracket and alternator * Works with or without an air conditioning compressor * Works with or without a power steering pump * For alternator-only race setup, Holley bracket PN: 97-409 should be used with Holley premium alternator (PN: 197-302 or 197-303)—ideal for high rpm applications (alternator designed and tested for up to 30 percent higher rpm) * Ideal for use on Godzilla crate engines and engine swaps
Not Yet Reviewed
$460.95
Holley EFI Terminator X Drive-By-Wire Throttle Body Wiring Harnesses
For an uncluttered, hassle-free LT engine swap, Holley EFI Terminator X drive-by-wire throttle body wiring harnesses are the solution. Designed for Gen V LTx throttle bodies and Terminator X and X Max ECUs, the harnesses are built with pre-terminated ends to make your install easier. Build your project to take advantage of DBW benefits with the help of Holley EFI's drive-by-wire throttle body wiring harnesses.
( 1 )
$286.95
Holley SBF Hi-Ram Intake Manifold Tops
Holley SBF Hi-Ram intake manifold tops are a great solution when you have limited room in the front of the engine bay. Designed to mount on Holley's existing SBF Hi-Ram manifold bases, these aluminum plenum tops resemble the older Ford EFI manifolds and let you mount the throttle body on the side. This will allow for easier fabrication for boosted applications or for just a different look on your Hi-Ram manifold. These side-mount plenum tops are available in natural cast aluminum or black powdercoat finishes—in models for Ford 5.0L style throttle body patterns in 95mm and 105mm sizes. Order the SBF Hi-Ram intake manifold top that you need for your custom induction system. Additional features and specs include: * Manifold top only (designed for side-mounted throttle bodies) * Cast aluminum construction * Allows room for designing boosted applications * Mounts to existing Hi-Ram manifold bases * Lid has been verified to fit under Cervinis 2.5 in. cowl hood on 1979-93 Mustangs with 351W and 302W Hi-Ram bases when using motor mounts that retain stock engine locations
Not Yet Reviewed
$378.95
—
$420.95
On Sale
Holley Electric In-Tank Fuel Pumps
Holley electric in-tank fuel pumps provide the extra fuel required after completing other engine modifications, such as adding performance camshafts, headers, larger injectors, and so on. They use a proven gerotor-type pump and are compact enough to fit existing hanger assemblies. They're also designed for easy installation and come complete with instructions and all necessary parts, including a new strainer-type fuel filter. Dozens of models and options are available; order the fuel pump recommended for your vehicle.
( 11 )
$286.95
