Availability
Edelbrock Performer-Link true roller timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Crank gears are machined from SAE 1144 stress-proof steel. Most Edelbrock Performer-Link true roller timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set cam timing 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. Edelbrock Performer-Link true roller timing chain sets are not for use above 6,500 rpm.
( 175 )
$71.95
—
$86.95
Edelbrock rocker arm stud bolt kits are designed for use with the Edelbrock Performer and RPM small block Chevy and Ford cylinder head applications. These screw-in style rocker arm stud bolts are manufactured from high-quality material for strength and durability and run in straight and true to offer nothing less than positive seating.
( 23 )
$64.95
—
$82.95
Designed for use with Edelbrock's single and dual feed fuel line kits, these high-quality stainless steel braided lines make it simple to complete your installation of any Edelbrock fuel pump to fuel filter. Russell anodized aluminum fittings are included.
( 43 )
$58.95
Edelbrock's Signature series black valve covers are engineered for function and styled for good looks. They feature a powdercoated finish for long lasting good looks, and have stock-style breather baffles that prevent oil passage to the PCV valve. They accept all emissions equipment, including PCV valves, and include rubber grommets for the breather and PCV valve holes. The Edelbrock Signature Series black valve covers clear most aluminum rocker arms and moderate lift cams. Some applications come in a high-profile design that's 1 1/4 in. taller than stock, and clears most roller rockers and valvetrain components, and a low-profile design that clears air conditioning and alternator brackets.
( 123 )
$86.95
—
$91.95
Edelbrock's performance CRC (core-reinforced-composite) valve cover gaskets' multi-layer construction consists of two highly compressible, high-rubber content, fiber-reinforced outside layers chemically bonded to a high-strength composite core. This unique core-reinforced construction provides excellent sealing integrity and conformability for easy installation, as well as radial strength to resist high-vacuum or blowout conditions.
( 223 )
$50.95
—
$64.95
These Edelbrock head bolt bushing kits allow you to use stock or aftermarket head bolts with Edelbrock or other aftermarket cylinder heads. They take the place of your head bolt washers and are hardened and chamfered.
( 15 )
$95.95
Edelbrock's Signature series chrome valve covers are engineered for function and styled for good looks. They're triple chrome plated for long lasting good looks and have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valves, and include rubber grommets for the breather and PCV valve holes. The covers clear most aluminum rocker arms and moderate lift cams. Some applications come in a high-profile design that's 1 1/4 in. taller than stock and clears most roller rockers and valvetrain components, and a low-profile design that clears air conditioning and alternator brackets.
( 158 )
$78.95
—
$90.95
Edelbrock Performer fuel line and fitting kits include the braided flex hose and pre-assembled ends to connect your fuel filter to the mechanical fuel pump—or, in racing applications, to the fuel pressure regulator. These kits are available in a variety of styles, providing leak-free installation in minutes. When plumbing a fuel system, trust the aftermarket performance expertise of Edelbrock!
( 114 )
$69.95
Edelbrock cylinder head gaskets provide the best sealing solution for your engine. Edelbrock relies on industry-leading manufacturers to ensure their head gaskets will provide optimum fit and sealing properties when used with Edelbrock cylinder heads. These replacement gaskets are machined from high-density materials to precise specs--for applications from the 1940s and up.
( 58 )
$65.95
—
$66.95
Edelbrock offers E-Series head bolt kits to install one set of cylinder heads. Each bolt kit includes the necessary bolts and washers for your application. E-Series bolts have a yield tensile strength of 190,000 psi for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. These cylinder head bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock "E" stamped into the hex head. Order the E-Series head bolt kit designed for your application needs.
( 5 )
$73.95
Edelbrock Max-Fire Ultra-Spark 500 spark plug wire sets offer performance and value to replace your OEM wires. They feature high-quality leads that deliver 500 ohms of EMI-RFI noise suppression with low resistance. Ultra-Spark 500 wires are built with superior cores—wrapped with a suppression material, conductive winding, and a layer of latex silicone. That is covered with inner insulation, braid tape, and an 8.5mm silicone outer jacket that won't crack or shrink, and resists chemicals. Why replace when you can upgrade? Treat your daily driver or budget build to Edelbrock Max-Fire Ultra-Spark 500 spark plug wire sets.
( 6 )
$62.95
Designed to take the guesswork out of carb swaps, these fuel line and filter kits provide a quick, leak-free installation in a matter of minutes. They'll work with all Performer and some other brands of carbs and are available in different forms for a variety of applications.
( 36 )
$50.95
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 52 )
$94.95
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$61.95
Edelbrock Max-Fire Coil On Plug ignition coils are designed with higher resistance for increased energy output at higher rpm, when compared to an OEM coil. They're ideal for use with turbocharged and supercharged applications or engines that have been converted to E85 fuel. The coils are sealed with a high temperature epoxy for shock and vibration resistance—as well as excellent thermal conductivity. The spark plug spring contact is made from stainless steel, with a ferrite lug to reduce EMI/RFI noise; while the boots are molded from a high temperature silicone compound for superior heat resistance up to 550 degrees F. Order the direct bolt-on OEM coil pack recommended for your vehicle.
( 5 )
$53.95
It's an unfortunate fact, but stock belt tensioners have been known to bend and even break under extreme driving. Edelbrock's steel belt tensioner braces are an inexpensive solution to this common problem. These serpentine belt tensioner braces are designed and made to be tough. Installation is easy--they simply bolt on to your stock tensioner and prevent deflection of the cast arm. These steel belt tensioner braces are designed for use with the Edelbrock E-Force supercharger systems.
Not Yet Reviewed
$76.95
Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.
( 2 )
$59.95
If you're rebuilding your cylinder heads, Edelbrock replacement valve seats will help you complete your job. Valve seats are critical components in the life and performance of your valves. Edelbrock valve seats are crafted from strong ductile iron for exhaust and intake locations. When you need to service your heads, choose these Edelbrock replacement valve seats.
( 3 )
$81.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
