Availability
Edelbrock high performance thermostats are designed to ensure consistent cooling in high performance applications. Edelbrock thermostats feature brass and copper valve assemblies with stainless steel bodies for durability. They are bolt-on OE-style replacements and are available to fit many popular domestic and import applications. They are available with160, 180, and 190 degree F ratings.
( 46 )
$22.95
—
$26.95
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 456 )
$29.95
—
$46.95
When installing new headers, or putting them back on after working on your vehicle, it's important to use a new set of gaskets. Edelbrock exhaust gaskets are made of EnCore HTX-900--a high-density, non-asbestos, fiber/metal core composite material consisting of two graphite coated, heat-resistant, fiber-blended sheets that are mechanically and chemically fused to an expanded steel core. The finished product provides high heat resistance, excellent load retention, and unmatched sealing performance on exhaust manifolds and headers. A 50 percent recovery rate allows for gasket expansion in the event your header loses the proper header bolt torque. Edelbrock exhaust gaskets are the perfect choice.
( 44 )
$29.95
—
$33.95
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$31.99
—
$49.95
Edelbrock Performer-Link true roller timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Crank gears are machined from SAE 1144 stress-proof steel. Most Edelbrock Performer-Link true roller timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set cam timing 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. Edelbrock Performer-Link true roller timing chain sets are not for use above 6,500 rpm.
( 175 )
$46.95
Edelbrock water necks are a great way to finish off your engine. They feature an O-ring design base for an improved seal, which also allows for removal without requiring a new gasket. The necks fit any 1 1/2 in. diameter outlet hose, include mounting hardware, and are available in a variety of styles, materials, and finishes.
( 104 )
$22.95
—
$36.95
Edelbrock offers upper to lower intake manifold gaskets for a variety of port styles, including their Tunnel Ram, Performer, Victor, and Performer RPM manifolds. These replacement seals are made from top-quality materials and designed to original specs, ensuring proper fit and performance. The economical gaskets are available in a variety of configurations; order the model designed for your year/make and engine application.
( 42 )
$22.95
—
$40.95
Is it time to rebuild your Edelbrock mechanical water pump? No problem-- these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materials and can be installed easily without any modifications.
( 16 )
$23.95
Don't cut corners when it's time for valves. Get genuine Edelbrock stainless steel valves. They're made from a tough, stainless steel alloy and are carefully designed to increase gas flow for more power. What's more, they have hardened stem tips for durability and are swirl-polished.
( 24 )
$31.95
—
$49.95
These Edelbrock choke block-off plates are designed to seal off the choke tower on the intake manifold. They are made of aluminum and include a gasket and the necessary mounting hardware.
( 33 )
$30.95
—
$32.95
When you need to do work that requires changing your timing cover gasket, make sure you have the right one for the job. These are direct replacements for use with your Edelbrock timing cover, ensuring a perfect fit and good seal.
( 13 )
$30.95
Edelbrock rocker arm stud bolt kits are designed for use with the Edelbrock Performer and RPM small block Chevy and Ford cylinder head applications. These screw-in style rocker arm stud bolts are manufactured from high-quality material for strength and durability and run in straight and true to offer nothing less than positive seating.
( 23 )
$23.95
Edelbrock Max-Fire Ford 289-302 steel distributor gears are designed specifically for use on Max-Fire distributors—in Ford small block 289-302 engines running a hydraulic roller camshaft with a billet steel core. These drive gears are designed specifically for small block Ford Max-Fire distributors with 0.467 in. diameter shaft and 0.250 in. hex oil pump drive. The gears are an optional replacement part for the iron gears that are identified by an orange paint dot that come pre-installed on the distributors. These new steel gears feature a white paint dot for easy identification.
( 6 )
$34.95
Edelbrock Pro-Flo 4 and Max-Fire Ford 289-347 and 351W distributor gears are specifically designed for Pro-Flo 4 and Max-Fire distributors in engines that are running a steel-core hydraulic roller camshaft. Made from steel, these distributor drive gears are an optional replacement part for the iron gear that comes installed with the distributor. Edelbrock also marks these distributor drive gears with a yellow painted dot for easy identification.
Not Yet Reviewed
$34.95
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle bracket is mounted to the intake.
( 21 )
$24.95
—
$31.95
Edelbrock's performance CRC (core-reinforced-composite) valve cover gaskets' multi-layer construction consists of two highly compressible, high-rubber content, fiber-reinforced outside layers chemically bonded to a high-strength composite core. This unique core-reinforced construction provides excellent sealing integrity and conformability for easy installation, as well as radial strength to resist high-vacuum or blowout conditions.
( 223 )
$36.95
Edelbrock pushrod guideplates for Edelbrock heads are made from high-grade alloy steel and hardened to 60 Rockwell "C." These guideplates are available in either a flat or stepped plate style. Stepped plates support the pushrods closer to the rockers, stabilizing them.
( 9 )
$49.95
Edelbrock EGR gaskets are designed to fit aftermarket Edelbrock aluminum intake manifolds. They fit the 3721, 3723, 3781, and 3783 Performer and Performer RPM intake manifolds.
( 3 )
$20.95
—
$30.95
Edelbrock Max-Fire Coil On Plug ignition coils are designed with higher resistance for increased energy output at higher rpm, when compared to an OEM coil. They're ideal for use with turbocharged and supercharged applications or engines that have been converted to E85 fuel. The coils are sealed with a high temperature epoxy for shock and vibration resistance—as well as excellent thermal conductivity. The spark plug spring contact is made from stainless steel, with a ferrite lug to reduce EMI/RFI noise; while the boots are molded from a high temperature silicone compound for superior heat resistance up to 550 degrees F. Order the direct bolt-on OEM coil pack recommended for your vehicle.
( 5 )
$40.95
—
$46.95
Durable and heavy-duty Edelbrock valve guides are made of manganese-bronze material for the ultimate in wear. They are designed to fit Edelbrock cylinder heads.
( 4 )
$20.95
—
$24.95
Bring back the performance of your throttle body by eliminating power-robbing air leaks, with genuine Edelbrock replacement throttle body gasket sets. They're made of premium gasket material and are available in applications to fit your throttle body.
( 10 )
$31.95
—
$39.95
Edelbrock 1994-95 Mustang EGR supply spacers are made from quality aluminum, and feature a natural finish. They are designed to be used with the 1994-95 Mustang throttle body adapters for Edelbrock 5.0L manifolds.
Not Yet Reviewed
$49.95
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They're made of cast aluminum and come complete with gaskets and bolts.
( 7 )
$47.95
If you're rebuilding your cylinder heads, Edelbrock replacement valve seats will help you complete your job. Valve seats are critical components in the life and performance of your valves. Edelbrock valve seats are crafted from strong ductile iron for exhaust and intake locations. When you need to service your heads, choose these Edelbrock replacement valve seats.
( 3 )
$23.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
