Availability
Showing In Stock Items. Show All 20 Items.
On Sale
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 144 )
$2,727.95
$2,427.95
On Sale
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 56 )
$2,592.95
—
$2,970.95
$2,292.95
—
$2,470.95
On Sale
B&M Z-Gate automatic shifters operate just like those high-dollar, gate-type racing shifters, yet cost much less. Made for street and mild competition, the Z-Gate shifters have an NHRA/IHRA-accepted reverse lockout, a neutral safety switch, a backup light switch, and a universal plastic console. Their patented "Z" shaped architecture totally eliminates the possibility of overshifting and missing a gear.
( 41 )
$318.95
$239.95
On Sale
These TCI Breakaway torque converters will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. TCI remanufactures them to last with furnace-brazed fins, needle bearings, and a flame-hardened hub--the same qualities that they gave their street/strip converter.
( 107 )
$543.95
—
$713.95
$493.95
—
$663.95
On Sale
These great looking three and four-speed automatic floor shifters feature an 11 in. chrome plated solid steel stick with knob and stop bolts for positive shifting. They include the shifter boot with bezel, linkage, and mounting hardware.
( 41 )
$170.95
$128.95
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 46 )
$1,299.95
$844.95
On Sale
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 46 )
$531.95
$481.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$142.95
$92.95
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 37 )
$573.95
—
$1,349.95
$315.95
—
$742.95
On Sale
Artec Industries AAM 9.25 lower axle trusses reinforce your entire front axle. Pairing heavy engines and stock axles isn't a great tandem for handling abuse. Artec trusses are CNC-cut and designed to add some beef—providing maximum up-travel with virtually no loss of ground clearance under your differential. No axles are unbreakable; but with the added muscle of Artec Industries AAM 9.25 lower axle trusses they'll have the needed strength to survive. Features include: * Built from 1/4 in. thick mild steel * Bottom triangle shape provides an increased structural rigidity and helps axle skid over obstacles better * Truss spans entire length of axle for complete reinforcement of the axle tubes * Includes upper inner C-gussets for total axle reinforcement * Comes in six separate pieces for compact shipping and easier installation
Not Yet Reviewed
$309.99
$278.99
On Sale
These bolts are heat treated to Grade 8 specification and have a reduced profile hex head for clearance. Their black oxide finish resists rust and corrosion. Lock washers are included.
( 16 )
$30.71
$19.96
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 104 )
$1,299.95
—
$1,449.95
$714.95
—
$797.95
On Sale
Hays high-performance throwout bearings are designed to withstand the high spring pressure and high-rpm conditions common to racing clutches. They're heat-treated and Blanchard-ground to ensure trueness.
( 21 )
$110.95
$61.95
On Sale
Lakewood bellhousing bolts are for bellhousing to engine block and trans to bell attachment. These threaded hex head bolts are built from high-strength chromoly steel, and then black oxide coated for a tough, long-lasting finish.
( 3 )
$49.95
—
$52.95
$27.47
—
$29.12
On Sale
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$543.95
$493.95
On Sale
When you've exceeded he limits of your Dodge 60 front axles, Artec Industries has the solution--heavy-duty trusses. Built from 3/8 in. thick mild steel truss tops with 1/4 in. mild steel ram mounts and gussets, these trusses are precision CNC-cut and bent for maximum strength. They are low-profile and span the entire length of your axle for complete reinforcement. Larger tires and aggressive driving ... maybe it's time to support your Dodge 60 front axles with trusses from Artec Industries.
Not Yet Reviewed
$359.99
$323.99
On Sale
Hays Street/Strip clutch kits are engineered and built as matched assemblies, using only top-quality new parts, to deliver maximum reliability and durability, as well as long-term dependability. They're available in both diaphragm and Borg & Beck styles, with sprung-hub clutch discs that have organic linings. Applications are available to fit a variety of cars and trucks aimed at street or street-and-strip use. These kits come complete with a pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). A pilot bushing is not included.
( 9 )
$699.95
$384.95
On Sale
These QuickTime flexplates have been designed and engineered to fit your OEM transmission without any modifications. They are made from durable H70 grade steel and are double welded/TIG welded for durability. These QuickTime flexplates are also zinc plated for long lasting finish.
( 5 )
$486.95
$267.95
On Sale
When you need only the strongest parts to keep it together, beef up your front-end with Artec Industries Dana 60 Front Hydro Ram mounts. Their overall low-profile design means that your axle is stronger, sleeker, easier to fit, and less likely to interfere with rocks or other parts of your vehicle. The mounts' unique design places your ram in its most effective and strongest location—close to the axle centerline, not high above it—and yet they protect it from the rocks. The Ram mounts extend to the end of the axle tube, providing reinforcement to the axle itself against bending and shearing. They're designed to take serious abuse and protect your steering. Artec Industries Dana 60 Front Hydro Ram mounts are available for fitment on a variety of applications, from 1960 and up. Product features: * 1/4 in. mild steel ram mounts and gussets are precision CNC-cut and bent for great fitment and reinforcement against damage * Ram mounts and gussets feature drainage holes for easy cleaning and reduced weight * Mounts double as an axle skid plate, offering protection for your ram and tie rods—and span the length of the axle tube for more reinforcement against bending and shearing * An additional 1/4 in. thick bolt-on skid plate in front of the differential allows easy removal of gears; it's bolted using included countersunk bolts, which don't get hung up on obstacles and hold up against trail damage * These kits require general welding and fabrication skills
( 2 )
$374.99
$337.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
