Availability
Crown Automotive clutch fork pivot balls allow for the adjustment of the release fork height when the clutch assemblies are changed. An improperly aligned clutch fork can increase the amount of pedal throw required to release the clutch. The surface where the pivot ball and clutch fork meet should be round, without any flat spots. These replacement parts from Crown are a direct fit for your Jeep.
( 5 )
$8.99
Crown Automotive rocker arm hold-down bolts are high-quality steel bolts made to fit specific applications. These pivot bolts are used to secure your rocker arm shafts when the old bolts break, become corroded, or have damaged threads. Crown Automotive is a leader in replacement parts for many vehicles.
( 6 )
$2.99
If your oil filter connector has stripped threads, it can cause a major oil leak. Replace a worn or aging oil filter adapter connector with a new one from Crown Automotive to keep your engine running properly and your garage floor and driveway clean. These connectors are direct replacement OE-style oil filter adapter parts.
( 10 )
$6.99
Crown Automotive clutch fork return springs will provide OE fitment and function. The proper movement and pressure of your clutch components depend on the many springs involved. No matter which throwout fork or lever springs you need for your classic rig or newer ride, Crown can help keep your clutch in optimum operation for smoother shifts. Choose your replacements from the selection of Crown clutch return springs for improved performance.
( 17 )
$2.99
Replace your old head bolts with Crown Automotive cylinder head fasteners. Head bolts withstand huge clamping loads and forces in their fight to keep the heads tightly sealed against their gaskets and the block. These heavy-duty fasteners are designed to hold parts together tightly. They're crafted and built to OEM specs for proper fit, form, and function. Whether you're repairing a blown head gasket or rebuilding a motor, order the Crown Automotive cylinder head fasteners designed to fit your application.
( 9 )
$4.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$9.99
When your original seals become hard and brittle, replace your valve cover grommets with Crown Automotive quality replacement parts for your Jeep. They are well-made, a snug direct fit replacement, and will install easily. Your seals may look fine, but if you're noticing a little oil on top, stop that leak with grommets from Crown.
( 17 )
$3.99
Crown Automotive valve locks are keepers! The stamped steel parts are small but necessary, and offer the proper fit and function you expect and need. Their engine valve spring retainer locks are available for many specific Jeep, Dodge, Ram, Chrysler applications.
Not Yet Reviewed
$1.99
—
$2.99
Crown Automotive timing cover gaskets will create a working seal between the timing cover and the engine block. After all, oil leaks can damage your gaskets, in which case they can no longer protect the timing belt and need to be replaced. These gaskets may be made from standard material, a plastic/rubber-style, or a silicon/steel seal. Crown helps you to get the perfect components for your application to protect your timing chain and gears.
( 1 )
$1.99
—
$13.99
Crown Automotive driveshaft bolts are made from strong steel to provide secure fastening. When you need parts for your Jeep, Chrysler, or Dodge—no matter how small—check out Crown and their line of replacement parts. Connect your front driveshaft and transfer case with their driveshaft bolts.
Not Yet Reviewed
$3.99
Clean air in, exhaust air out—Crown Automotive valves fit your vehicle with quality and value you can count on. Maintaining efficient engine power depends on the operation of the intake and exhaust valves. These Crown replacements are made from quality materials to provide long-lasting service. Valves are available for a wide range of Jeep and Dodge models, in particular.
( 2 )
$7.99
Crown Automotive U-joint strap kits are constructed from heavy-duty materials to match OEM standards for better performance and increased reinforcement. They offer superior strength and security to ensure that your U-joints stay fastened in place. These U-joint kits include everything that's needed to be properly installed in just minutes.
( 4 )
$8.99
—
$9.99
Anytime you replace your brake hose, install new Crown Automotive brake caliper crush washers to ensure a tight, leak-free seal. The accessories you use to install your brake lines are just as important as the hose itself. Crown Automotive brake hose gaskets are quality replacement hardware designed to get the job done right the first time.
( 2 )
$1.99
—
$3.99
Off-roading can be a bit rough on many parts, including your cooling system. Springs and shocks help to soften bumps, while extra protection comes from Crown Automotive radiator support bushings. These rubber and steel bushings provide flex to reduce jolt damage to the radiator and mounts. Order the model recommended for your vehicle application.
( 4 )
$10.99
Crown Automotive brake bleeder screws are engineered to help you effectively bleed your brake system and restore the brakes to proper operation. These screws are direct replacements for your brake bleeder valves and allow you to purge your brake lines of air bubbles and maintain hydraulic pressure.
Not Yet Reviewed
$1.99
—
$9.99
Crown Automotive push pins will fasten most any of your automotive jobs. They have a selection available in many sizes and shapes to attach and affix grilles, fender flares, fascias, bumpers, door panels, and trim--inside and out. Restore and make repairs with Crown Automotive push pins.
( 4 )
$1.99
—
$5.99
When you see oil leaking from your Jeep's rear axle, it's time to order new Crown Automotive axle seals. These seals are designed for oil bath axles and are built identically to the originals for excellent fit and finish. Whether your brakes end up coated in oil or the lube simply runs onto the ground, these economical Crown Automotive axle seals will solve messy problems that could lead to more serious issues. Dozens of styles are available to service numerous vehicle applications.
( 13 )
$5.99
—
$11.99
These high-quality transfer seals and gaskets from Crown Automotive meet or exceed the original manufacturer's requirements to give you the reassurance that your transfer case will not leak. They offer you an easy and affordable way to get everything you need in one product.
( 3 )
$15.99
Crown Automotive provides a variety of performance parts and accessory hardware for your vehicle, including valve cover fasteners. The hardware is generally the top choice for professional engine builders because of its ability to properly position a gasket and guide the valve cover into place. Each valve cover fastener features the appropriate rolled threads and precise finishing to help ensure proper valve cover sealing which deters unwanted leaks.
Not Yet Reviewed
$5.99
Crankcase vent tubes and elbows are relatively inexpensive items that help maintain the performance of your engine. Crown PCV (positive crankcase ventilation) vent tubes and elbows are offered in several styles for many Jeep, Dodge, and Ram applications. They provide effective removal of blowby gases, keep pressure at safe levels, and work to prevent oil leaks. Ensure your engine operates efficiently with Crown PCV vent tubes and elbows.
( 11 )
$4.99
—
$5.99
Crown Automotive fuel injector clips are made to meet or exceed OEM specifications and are available for a variety of applications. For quality direct replacement parts go with Crown Automotive.
Not Yet Reviewed
$6.99
Hood bump stops help to protect your grille and fenders in case of hand slippage while closing the hood. Crown Automotive hood bump stops are excellent replacements when the rubber OEM pieces fall off over time or get damaged. They're designed and built to OEM specs for an excellent fit and reliable performance. Count on Crown Automotive for much-needed protection.
( 8 )
$4.99
—
$7.99
Crown Automotive replacement nuts are sturdy components made to OE specs to solidly anchor many automotive applications. Crown offers an extensive line of quality replacement parts for Jeep, as well as a growing line of parts for other vehicles. Check applications for fitment.
( 5 )
$2.99
—
$3.99
Crown Automotive hose clamps are great connections for many automotive applications. They are necessary to ensure great hose interface hookups to your vehicle's other components--some of them vital. So, don't risk a blown hose. When it's time for hose clamps, do it with quality replacements from Crown.
Not Yet Reviewed
$4.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
