Availability
Showing In Stock Items. Show All 72 Items.
BluePrint Engines Chrysler 408 c.i.d. 465 hp crate engines sound and run better. BluePrint Engines use an advanced computerized balancer to get their rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. They also include a comprehensive, dyno-generated printout showing the critical specs. No more guessing what your installed engine's real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your Blueprint Engines' 408 c.i.d. stroker crate engine dyno results! Features, items, and specs: * Available in 3 levels of dress: Long block base, fully dressed, and drop-in-ready * Long block base model includes oil pan, timing cover, and valve covers * Fully dressed model includes long block components, plus carburetor, intake manifold, distributor, and harmonic balancer installed * Drop-in-ready model includes fully dressed components, plus water pump, air cleaner, spark plugs, and spark plug wires * Aluminum cylinder heads: 58cc chamber; 2.02 in. intake/1.60 in. exhaust valves; 176cc intake/75cc exhaust runners * Roller cam: .544 intake; .541 exhaust; 236 intake/242 exhaust duration at .050--110 degree lobe separation * Cast steel crankshaft: 4.000 in stroke; OEM-type 6.123 in. connecting rods with 150,000 psi bolts; forged pistons; external balance * Hand-picked, seasoned block: Square and parallel decked with precision-machined and sonic-tested cylinders, 2-bolt main, 4.000 in bored and .040 in. over, 2-piece rear main seal, and mechanical pump provision * 34 degrees total at 4,000 rpm ignition timing * Brass freeze plugs * Recommended fuel: 91 octane
( 1 )
$8,599.00
—
$9,649.00
BluePrint Engines Chrysler 408 C.I.D. 465 hp dressed long block crate engines are fully Dyno tested, passed vigorous inspections, and ready to power up your project. These Mopar compatible crate engines are ready to replace your tired Charger, Dart, Roadrunner, or Barracuda powerplant. There's no replacement for displacement, and replacing a little 273, 318, or 360 with a Blueprint 408 stroker crate engine will have your back tires up in smoke in no time! They are offered with a polished or black finished serpentine 8-rib front pulley kit. Features, specs, and contents: * Horsepower and torque: 465 hp/494 lb.-ft. * Handpicked seasoned Magnum block * Cylinders honed to within .0002 straightness and roundness * 2-bolt main * 4.000 in. bored .040 in. over * Cast steel crankshaft * 4.000 in. stroke * Forged Magnum 6.123 in. connecting rods with 150,000 psi bolts * Forged pistons * Aluminum Magnum pattern cylinder heads--58cc chamber * Aluminum roller rockers * 2.02 in. intake/1.60 in. exhaust valves * 176cc intake/75cc exhaust runners * Roller cam * .580 intake/.577 exhaust * 235 intake/242 exhaust duration at .050 * 110 degree lobe separation * Valve covers, oil pan, timing cover, water pump, plugs, wires, distributor, water neck, thermostat, fuel pump and fuel line, harmonic balancer, air cleaner * Power steering pump: Type II with -6AN pressure, -10AN return, 1,400 psi * Air conditioning compressor: 7B10 Peanut-style * 30 month/50,000 mile warranty
Not Yet Reviewed
$11,599.00
—
$11,799.00
QA1 Mopar front street performance coilover conversion systems transform your classic Charger, Road Runner, or other classic B/E-body Mopar into a restomod that drives, corners, and launches like a modern machine. These Mopar systems feature great-looking powdercoated components that improve performance and save weight while making it easy to swap engines, including the Gen 3 Hemi. QA1 Mopar street performance systems are available with single or double adjustable shocks in kits offering 0 to 2 in. or 2 to 4 in. of drop. Features and benefits: * Coilovers help you achieve the perfect stance and ride quality * Single-adjustable shocks are recommended for cars used primarily on the street * Double-adjustable coilovers are recommended for consistent drag racing, autocross or road racing * Rack-and-pinion steering provides a modern feel and improved handling in any setting * Drastically improve geometry, enhancing driving feel and cornering capabilities * Designed for everyday driving, drag racing, and handling * Tubular design improves exhaust clearance while reducing weight * Works with multiple engine configurations
( 3 )
$5,107.95
—
$6,561.95
QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Greater control and improved cornering are key benefits of QA1 Level 2 handling suspension kits. They're designed to boost performance and include a more extensive assembly of components than Level 1 kits. They offer easy bolt-on installation and full compatibility with the OEM parts you attach them to. All QA1 handling suspension kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you desire. Select the kit designed for your vehicle.
( 10 )
$8,465.95
—
$8,588.95
Street cruisers really can't ask for more than they'll find in ATK high performance Chrysler 360 320 hp Stage 3 long block crate engines. They're packed with the finest, well-matched components, so you can drop the engine into your project and fire it up. ATK has outfitted the blocks as completely as possible to save you time and headaches. These complete Stage 3 long blocks typically include carburetion, spark plug wires, and plugs. ATK Chrysler 360 engines include: * Seasoned OE Magnum block * OE-cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Piston rings * Hydraulic roller camshaft * Magnum 65cc cylinder heads * Steel rocker arms 1.6 pedestal * Brass freeze plugs installed and sealed * Oil galley plugs installed and sealed
( 2 )
$5,798.99
Callies Mopar engine blocks are Officially Licensed Mopar products. Together with Energy, Callies will manufactured and distribute cast iron engine blocks and components. All parts manufactured will carry authentic Mopar part numbers and be produced from original Mopar molds, cores, and engineering data. The Mopar blocks are being offered in different bore sizes in finished and RoughBore (RB) versions.
Not Yet Reviewed
$6,039.00
ATK High Performance Chrysler 360 Magnum 320 hp Stage 3 long block crate engines with EFI are perfect for a street cruiser, and offer great street ability, stock idle, and good power. Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 engines with EFI set your vehicle up for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Typically ATK Chrysler 360 Magnum 320 hp complete EFI engines consist of: * Seasoned OE Magnum block * OE cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Magnum cylinder heads * Steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Stock water pump * Front damper * FiTech Go Street EFI 400 hp * Spark plugs and wires * Dyno test/tune
( 2 )
$5,898.99
QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Top performance is the desired goal of many automotive upgrades—precisely what QA1 Level 3 handling suspension kits deliver. Compared with the Level 1 and 2 packages, these heavy-duty assemblies offer additional control components, as well as stiffer springs to maximize your cornering ability and handling. QA1 Level 3 kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you want. Select the kit designed for your vehicle.
Not Yet Reviewed
$10,582.95
—
$10,705.95
BD Diesel Performance automatic transmissions are designed to transfer the power from high-torque modified diesel engines. They feature redesigned clutch packs with 50 percent more holding surface, steel 6-pin planetary gear carriers, and new lube ports added for high-load areas. Shift strategies and pressure circuits are also modified to handle the high-torque applications. BD Diesel transmissions are not rebuilt factory transmissions--they are custom-tailored to work with your modified truck.
( 1 )
$5,196.00
—
$6,293.00
ATK High Performance Chrysler 408 Stroker Magnum 465 hp Stage 1 long block crate engines are perfect for muscle cars or trucks, and they will have a lopey idle with great low/mid-range power. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. They offer a great way to upgrade your Mopar-equipped vehicle. Typically ATK Chrysler 408 Stroker Magnum 465 hp base engines consist of: * Seasoned OE Magnum block * Nodular iron crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * OE Hydraulic roller camshaft * Performance cylinder heads * Billet aluminum full roller rocker arms * Timing set and cover * Oil pan, oil pump and pick-up tube * Valve covers
Not Yet Reviewed
$7,914.99
Designed from a clean slate approach, Dart now offers the Iron Eagle Mopar Gen III cast iron bare blocks that address the shortcomings of the Hemi Gen III platform, and are the ideal candidate for hot rodders, drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts. By utilizing conventional style main caps with Gen III rotating assemblies and related components, Dart has addressed the windage and oil control problems, along with revising the cooling and oiling passages for improved flow. Non-VVT and VVT version offerings are available. Get everything you ever wanted out of your Gen III Hemi engine with the Iron Eagle Mopar Gen III cast iron bare blocks by Dart! Key features of Dart Iron Eagle Gen III Hemi cast iron engine blocks: * Manufactured from superior strength cast iron * Priority main oiling system with two lifter crossovers and restrictor provisions * Siamese cylinder bores with extra thick walls * Extra-thick decks ensure reliable head gasket seal * Blind head bolt holes available in 7/16 in. standard or 1/2 in. upgrade * Scalloped water jackets increase flow around cylinders for better cooling * Clearance for 4.050 in. stroke with steel rods * Billet steel 4-bolt main caps 1-5, center 3 main caps splayed * Main studs standard * Gen III Hemi style motor mounts * Provisions for OE stock roller lifters and cam * Uses stock timing covers * All OE bolt holes for starter, water pump, etc. * Block can be machined for VVT or non-VVT camshafts * Parts kit included (32000050 for non-VVT, or 32000051 for VVT); note parts kits do not include cam bearings
Not Yet Reviewed
$5,499.99
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$26,799.00
—
$26,899.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$18,799.00
—
$18,899.00
ATK High Performance Chrysler 408 Magnum 465 hp Stage 3 long block crate engines are a great way to upgrade your old Mopar-equipped vehicle. These Magnum-based 408 c.i.d strokers have a lopey idle and great low/mid-range power, just perfect for a muscle car or truck. The technical specs for ATK Chrysler 408 Magnum Stage 3 crate engines are: * Horsepower: 465 hp * Torque: 535 ft.-lbs. * Block: seasoned OE 1993-2001 Magnum block * Bore/stroke: 4.040 x 4.000 * Displacement: 408 c.i.d. * Crankshaft: nodular iron 4.000 in. stroke internally balanced * Connecting Rods: 4340 forged I-beam with ARP 8740 Bolts * Pistons: forged * Piston rings: moly rings * Compression ratio: 10.1:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: 229/233 @.050 in., .520 intake/.515 exhaust * Camshaft bearings: installed and clocked to OEM position * Cylinder heads: Edelbrock Performer RPM aluminum 58cc/176cc 2.02/1.60 * Freeze plugs: brass installed and sealed * Rocker arms: billet aluminum 1.6 full roller * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. center sump * Weight: 430 lbs.
( 2 )
$9,882.99
TCI 6x 6-speed GM 4L80E automatic transmission packages are the first aftermarket 6-speed automatic transmissions capable of handling 850 hp. They give you six forward gears (2.97, 2.31, 1.57, 1.18, 1.00, and 0.75) for quicker acceleration and increased fuel economy at cruising speeds. The TCI 6x 6-speed GM 4L80E automatic transmission packages are versatile transmissions that fit Chevy small block, big block, and LS Series engines. They also feature a compact design, allowing them to work in a variety of vehicle applications, including pro touring, street, and race vehicles. The TCI 6x 6-speed GM 4L80E automatic transmission packages include a paddle shifter, wiring harness, dipstick, and transmission cooler. Choose the TCI transmission package that's recommended for your vehicle and engine application.
Not Yet Reviewed
$9,456.95
Does your HEMI equipped Challenger, Charger, Magnum, 300, or RAM Truck need more power? Then equip your ride with an Edelbrock E-Force Chrysler Stage 1 street legal supercharger system—the most efficient supercharger on the market for the popular Chrysler 5.7L, 6.1L, and 6.4L HEMI engines. These complete supercharger systems provide maximum flow, minimum temperature rise, quiet operation and reliability only the Edelbrock name can guarantee. They feature minimum air restriction in and out of the supercharger for optimal flow; and they include individual 7 in. long intake runners that allow for maximum low-end torque and great drivability. These systems are also available in a Stage 3 Pro Tuner system based on the Stage 1 system, but paired down to the essential components for your custom race builds. Order the model recommended for your application. Optional supplemental warranties are available (Stage 1 only) to give you peace of mind when installing an Edelbrock supercharger system on your brand new vehicle.
( 4 )
$9,189.95
—
$10,446.95
Give your Ram truck more towing power with our new E-Force Stage 1 street legal supercharger systems. This complete supercharger system provides maximum flow, minimum temperature rise, quiet operation and reliability. It features minimum air restriction in and out of the supercharger for optimal flow and performance. The individual 7 in. long intake runners allow for maximum low end torque for towing and off-road applications while maintaining great daily driving manners.
( 4 )
$8,204.95
—
$9,096.95
Looking for a better launch, straight-line stability, and consistent performance? Turn to QA1's drag racing suspension kits for a full-vehicle upgrade that fits your needs. Available in three different levels of performance, these drag racing kits offer easy, bolt-in installation (some welding may be needed) and seamlessly works with whatever OE component each piece attaches to. And with different levels, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. QA1 Level 2 drag racing kits are ideal for owners looking for serious performance gains at the track. They deliver everything needed in one shot, taking the guesswork out of the process, so you can skip the research and focus on preparing for your next race. Select the kit designed for your drag race car.
Not Yet Reviewed
$8,208.95
QA1 Mopar front drag coilover conversion systems transform your classic Charger, Road Runner, or other classic B/E-body Mopar into a restomod that drives, corners, and launches like a modern machine. These Mopar systems feature great-looking powdercoated components that improve performance and save weight while making it easy to swap engines, including the Gen 3 Hemi. Features and benefits: * Coilovers help you achieve the perfect stance and ride quality * Rack-and-pinion steering provides a modern feel and improved handling in any setting * Drastically improve geometry, enhancing driving feel and cornering capabilities * Designed for everyday driving, drag racing, and handling * Tubular design improves exhaust clearance while reducing weight * Works with multiple engine configurations * Add the optional sway bar (not included) to further enhance performance and cornering capabilities.
Not Yet Reviewed
$5,315.95
—
$6,438.95
FAST Gen III Hemi Supercharger/Camshaft Power Packages provided the perfect paring of products for enthusiasts to gain a 1,000+ hp potential from their Dodge. These Power Packages feature Edelbrock's 2650 TVS supercharger with patented, dual-pass, 3-core integrated intercooler, and COMP Cams' LST camshaft designed for supercharger applications. FAST Gen III Hemi Power Packages have all the basics required to install the supercharger, but necessary accessory items such as fuel injectors, air intake, and heat exchanger pump are left up to the installer, providing total flexibility for custom installations. FAST Edelbrock/COMP Cams Power Packages include: * 2650 TVS supercharger--patented integrated intercooler with 45 percent more cooling area and the ability to generate major power gains through lower inlet air charge temperatures * Supercharger pulleys: -- 3.500 in. is pump gas-friendly supercharger pulley for engine break-in, initial tuning, and general performance driving -- 2.625 in. when maximum power is desired on race fuel or E85 * Accessory drive pulleys * Fuel lines and rails * Low Shock Technology camshaft * Phaser limiter * Pushrods * Conical valve springs * Chromoly steel retainers * Valve locks and seals * Spring seats and shims * Installation hardware
Not Yet Reviewed
$9,279.95
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$10,221.00
Summit Bucks
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$8,399.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$16,899.00
BluePrint Engines Pro Series Mopar 426 c.i.d. Base dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$24,299.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
