Availability
Crown Automotive offers automatic transmission cooler lines for a wide range of vehicles, including Jeep and Dodge models from the 1990s and up. These replacements are made from original materials and factory specs to ensure a proper fit and optimum performance. The lines connect various points, facilitating coolant flow and protecting key components under the hood.
( 2 )
$91.99
Crown Automotive manual transmission input bearing retainers are heavy-duty steel retainers built to replace parts, which are prone to suffer oil starvation at slightly deficient oil levels. Retainers often get worn or damaged due to being in constant motion any time the engine is running. Worn or defective retainers may create excessive noise, which continues as long as the engine runs. A severely worn input shaft bearing can cause the transmission to slip out of gear while moving. So, don't wait; go with Crown and travel with peace of mind.
( 6 )
$66.99
—
$99.99
Timing covers are designed to protect the timing chain, cam belt, or timing belt from gravel, grime, and road debris. Crown Automotive timing covers are an exceptional replacement for damaged or missing covers. They're designed and built to OEM specs for excellent fit and reliable performance. The covers are available in a variety of materials, sold individually or as part of a kit, for fitment on a range of makes and models. Give your vehicle the protection it needs to perform with Crown Automotive timing covers.
( 7 )
$59.99
Crown Automotive fuel injectors supply optimum fuel efficiency for your engine. These quality components deliver maximum spraying action to give your ride the power it needs when it needs it most. The units are available for a wide range of vehicles—including many Jeep and Mopar family models. Give your vehicle a "shot" at peak performance with Crown Automotive fuel injectors.
( 4 )
$52.99
—
$99.99
Counter vibrations with Crown Automotive harmonic balancers. With these dampers attached, destructive torsional vibrations will be reduced, and this will help extend the life of your crankshaft. Crown has a selection of OE-fitting replacements made of iron and powdercoated. There is a lot of power and torque produced under the hood of your vehicle and Crown Automotive harmonic balancers will keep it all safely under control.
( 23 )
$62.99
—
$78.99
Camshaft bearings have a relatively easy life compared to other bearings, but they too, eventually need to be replaced. Get Crown Automotive camshaft bearings if they're scored, showing copper, out of spec, or you want all-new parts. They're designed and manufactured to OEM specs for excellent fitment, dependability, and correct sizing.
( 1 )
$59.99
Fix noisy idler pulleys in your car with Crown Automotive direct fit replacement parts. Your serpentine belt is hard at work, bending and flexing against the pulleys as it powers your accessories. Over time, these pulleys can wear out and begin to squeak. When it's time for replacements, go with Crown direct fit pulleys.
( 10 )
$65.99
It's such a sinking feeling to get into your vehicle, turn the key, and nothing happens. There are many new batteries to choose from, but Crown Automotive alternators are the right choice for Jeep, Dodge, and Chrysler vehicles. These alternators are based on the OE design and pulley style for easy replacement without the need for additional brackets or customization. Some versions have higher amperage alternatives for those vehicles with added sound systems, lights, or other power-draining accessories. Whether you believe in preventive maintenance, or need a quick replacement, Crown Automotive alternators will get you running right.
( 5 )
$103.99
Stop overheating! Crown Automotive mechanical water pumps are direct-fit replacements for a vital part required to circulate coolant around your engine. When your pump begins to leak coolant or becomes noisy, Crown OE-style pumps will get you cooled down and back on the road with confidence. Order the water pump designed to fit your application.
( 12 )
$50.99
—
$101.99
Fix the vibrations caused by failed OE bushings with Crown Automotive motor mounts. Sold individually and in kits, the build quality is as good as or better than the units they are replacing. These mounts include steel or aluminum brackets and rubber/steel bushings which are flexible enough to absorb engine motion. Replace your weak, broken, or oil-soaked engine mounts with quality Crown parts, available for fitment on a wide range of Jeep, Dodge, Chrysler, Plymouth, and Eagle vehicles.
( 13 )
$53.99
Crown Automotive stocks differential carriers that will keep your vehicle moving. These case-only selections feature rugged steel construction and are available in limited slip and open styles. Replace or build the power to keep your wheels turning with help from Crown differential carriers.
( 2 )
$108.99
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM"--the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive transfer case yokes, so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you're on a trail ride or hot rodding on the street, always be prepared with Crown Automotive transfer case yokes.
( 2 )
$64.99
Crown Automotive automatic transmission shift solenoids will efficiently control the flow of transmission fluid and restore smooth gear changes. Covering Jeep, Chrysler, and Dodge vehicles, they are built from quality materials and with fit and function just like the originals. No hardware is included; reuse existing hardware.
Not Yet Reviewed
$69.99
As you pull to the side of the road with gauge lights flashing and alarms dinging, it becomes obvious that your vehicle's lost the serpentine belt. Crown Automotive accessory belt tensioners are available to replace one of the most overlooked parts in the engine bay. These tensioners feature metal and hard plastic construction and include the bolt. They're produced to meet or exceed OE parts for fit, quality, and reliability. Don't let your Jeep become a disabled fixture on the highway shoulder; install Crown Automotive accessory belt tensioners to keep your serpentine system rolling.
( 2 )
$56.99
—
$79.99
Crown Automotive starters are built to turn your engine over with authority. Starters are electrical components that get put through a lot of temperature fluctuations, along with the exertion involved with having to turn your car's crankshaft every single time you start it. Therefore, they often need replaced. Crown parts are high-quality and made to OE specifications to replace worn, misfiring starters.
( 13 )
$90.50
—
$102.99
Transmission solenoids direct transmission fluid into the valve body to engage the correct gear. Crown Automotive OE-style transmission solenoids can replace a failing unit to prevent tranny problems. These elements can fail due to electrical issues or dirty fluid that's caused the shift solenoid to become stuck open/closed. If you are experiencing erratic shifting or a shifting delay, Crown can help get you back in gear.
( 4 )
$73.99
—
$103.99
Maintain proper suspension and steering by replacing your tired ball joints with a fresh set from Crown Automotive. All ball joints wear down after time. The harder you drive your Jeep, the faster the ball joints will wear. Maybe your Jeep is making a clunking sound or your steering feels tight in spots. You can have confidence in long-lasting dependability and performance with quality replacement parts from Crown.
( 7 )
$55.99
Excessive wear, warping, and metal-to-metal contact can cause brake rotors to go bad. When the time comes for a brake job, get Crown Automotive brake rotors specifically designed for your vehicle. These vented rotors are designed and built to OEM specs for an easy installation and service you can depend on. Their solid surface provides reliable braking under diverse conditions. Driving fast and crawling down the side of a mountain are both enjoyable. Make sure you're able to stop--get Crown Automotive brake rotors.
( 5 )
$51.99
—
$113.99
Crown Automotive EGR valves will work with your engine management system to control your vehicles emissions. They are quality units designed and engineered to fit and function just like the originals they are replacing. Keep your Jeep, Dodge, Ram, Chrysler vehicles running properly with help from Crown Automotive. Valves will include gaskets unless otherwise noted.
Not Yet Reviewed
$99.99
—
$107.99
In late 1980s to mid 90s, Jeep used a vacuum actuator to shift the transfer case and corresponding front axles in and out of 2WD, and high or low 4WD. Crown Automotive 4WD front axle actuators will replace faulty vacuum switches to improve your vehicle's get-up-and-go, no matter the terrain.
( 8 )
$68.99
Are you experiencing sporadic oil pressure readings? Crown Automotive oil pressure sending units can get your oil pressure gauge working accurately again. Replacing the sensor is usually the easiest and cheapest start to troubleshooting oil pressure issues, and Crown offers an extensive line of quality factory-style replacement sensors; many are direct-fit replacements.
( 20 )
$50.99
Crown Automotive knows your disc brake calipers absorb a lot of heat produced from your braking system. Eventually, this heat can weaken or destroy the seals inside your calipers. When your calipers begin to leak fluid or to stick, replace them with new components from Crown. These cast iron or aluminum housings are available in a variety of finishes and assembly styles for all four wheels. Select the stock calipers recommended for your year/make/model application.
( 2 )
$50.99
—
$106.99
Crown Automotive ignition switches activate the main and accessory electrical systems in a vehicle and, when the key is turned, transfer power to the starter, too. All of the current running through the ignition switch will eventually overheat it, requiring a replacement. These switches are designed and built to OEM specs for excellent fit and reliable performance.
( 3 )
$59.99
Idle air control valves go bad because of excessive carbon buildup in the intake manifold. Crown Automotive replacement idle air control valves are built to control and maintain a consistent engine idle speed when the car is cold or extra load is put on the engine, such as the A/C or radio. When the valve malfunctions, the idling speed is no longer regulated, and your engine may stall. Check the applications for the proper fitment of these Crown IAC valves and automatic idle speed (AIS) motors.
( 3 )
$50.99
—
$93.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
