Availability
Fleece Performance Cheetah Holset VGT turbochargers will lower EGT's, supply top-end power, and provide quick and tight throttle response. They don't require an installation kit; however aftermarket off-road tuning and free-flowing exhaust are required. These drop-in replacement turbochargers have 63mm billet compressor wheels, a high-flow turbine wheel, and can support 650 rwhp. They provide spooling similar to stock and an operating range of 40 to 45 psi. When on the prowl, having fun, working for your meal, or racing others, enjoy the spirit of your turbo's namesake—Fleece Performance Cheetah Holset VGT turbochargers.
( 1 )
$2,999.00
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,847.50
If you're seeking exciting performance out of a drop-in-and-go unit, then you need Fleece Performance Cheetah FMW HX35 turbochargers. They feature a high-flow turbine wheel, a 63mm FMW compressor, and reduced EGTs. These turbos do not require specialized tuning, and yet they provide quick response, excellent overall drivability, and support up to 650 RWHP. Whether you want more seat-of-the-pants performance, or torque for towing, Fleece Performance Cheetah FMW HX35 turbochargers have you covered. Important application information: Customers with 1994-2002 vehicles need to look at the pictures of part numbers FLE-FPE-HX35-GTC, -LWG, and -SWG and compare the wastegate orientation and bracket on stock units to find the correct turbo. Refer to the Notes section for additional information.
Not Yet Reviewed
$1,699.00
If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some significant drawbacks including the 1/4 tank issues that result in cavitation of the pump when you draw air into the fuel system. To resolve this issue there are Fleece Performance SureFlo performance sending units. SureFlo units are designed to work with aftermarket lift pumps and fit directly into your stock sending unit location. Each one features factory-style quick disconnects to adapt your stock fuel lines at the tank, giving you the cleanest installation available, and requiring no cutting or drilling of the tank. SureFlo works by drawing fuel from, and returning fuel to, the bucket assembly at the base of the unit, ensuring you are always drawing fuel into your pump and not drawing air into the fuel system, as well as eliminating the dreaded 1/4 tank problems. The SureFlo bucket also incorporates one-way check valves to allow fuel to easily flow in at lower levels. Fleece Performance SureFlo performance sending units are a great alternative for trucks originally equipped without an in-tank pump needing to repair a malfunctioning level sender or if you are simply looking to run your own custom fuel lines directly to the tank. Choose the SureFlo unit designed for your Cummins or Duramax fuel system. Features: * New fuel level electronics and fuel float * Heavy-duty billet aluminum cap * Universal -8 AN ports for professionally plumbing a custom fuel setup * New O-ring or flange seal * Adaptation pigtail connector (where applicable)
( 5 )
$359.00
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$799.00
—
$1,099.00
Trust Fleece Performance to bring you the best OE alternative parts you need! Their replacement rocker arm assemblies are direct-fit replacements for specific Cummins engines that meet or exceed OE specifications. Service your diesel with the help of Fleece Performance.
Not Yet Reviewed
$119.99
Eliminate the installation headaches associated with non-flexible OE drain lines with Fleece Performance silicone turbo drain tube kits. Each kit features a larger inner diameter, smooth silicone hose for longevity and durability, and black anodized billet aluminum flange with integral O-ring for leak-free performance. Fleece's patent pending drain hose simplifies turbocharger installation and will ensure proper oil drainage from your turbocharger. Kits include new fasteners and are designed for use with all Cummins equipped Dodge Ram factory-style turbochargers, VGT or HX35 and HY35-style turbochargers, as well as aftermarket drop-in replacements, like Fleece's Cheetah Series. Choose the turbo drain line kit designed for your Cummins.
( 3 )
$94.99
Fleece Performance coolant bypass kits meet the demands for more cooling that comes with increased horsepower. Your engine cooling system was designed to handle a 300-350hp engine. When you increase the power, you increase the demand on your cooling system and the possibility of problems that may lead to failure. Fleece coolant bypass kits feature a secondary thermostat that operates on temperature--not excessive pressure--solving excessive pressure problems before they become an issue by ensuring consistent temperatures across all six cylinders. Each kit includes high-quality AN O-ring fittings and AN hose connections with braided hose to ensure a leak-free installation. When there's a need for better performance, you can rely on coolant bypass kits from Fleece to supply the necessary components for assured greater performance.
( 6 )
$355.77
—
$399.99
Fleece Performance turbo oil feed lines ensure that your system gets an adequate oil supply. They offer replacements for your OE setup, as well as remote kits that prevent premature bearing failures. All include extra-flexible, smooth bore PTFE hose and high-quality fittings. The remote kits will also include a stock oil feed plug and an oil galley rifle fitting. Whether you're replacing or upgrading, Fleece Performance turbo oil feed lines are available for your application.
( 1 )
$69.99
When installing a Fleece Performance S400 turbo with intercooler, you're going to need the proper adapters. These 90-degree discharge adapters include a clamp and O-ring to ensure you get the proper seal. Don't lose out on performance!
( 1 )
$60.00
Eliminate the troublesome and leaky quick-connect heater core line on your truck with the latest OEM+ solution from Fleece Performance. Their heater core replacements hose and fitting kits are direct replacements for the problematic stock hose and quick-connect style fitting. The silicone hose and stainless steel fitting will provide a reliable solution to fix the leaks once and for all. Fleece kits include Permatex thread sealant and two new hose clamps.
Not Yet Reviewed
$69.99
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 3 )
$17.99
—
$59.99
Upgrade your Cummins valve springs and retainers with Fleece Performance spring and retainer kits. They are manufactured from "super clean" high-tensile chrome silicon steel with a proprietary multi-step heat treating process that minimizes load loss. The springs have a seat pressure of 105 lbs. with an open pressure of 195 lbs. at maximum lift. The retainers are through hardened 4140 chromoly steel and have a black oxide finish. Please note: Retainer locks are not included.
Not Yet Reviewed
$499.99
Upgrade your fuel system with these Fleece Performance fuel filter delete blocks. If you have an aftermarket fuel filtration system, such as an Air Dog or a FASS, your factory fuel filter is no longer necessary—is only becomes an extra restriction and an eyesore. These delete blocks will remove that restriction and help clean up under the hood of your truck. They mount perfectly to allow the factory fuel return lines to be used without any relocating or bending. The blocks also feature a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line.
( 2 )
$79.25
Put the finishing touch on your truck by easily connecting the turbo to the factory drain location on your Cummins block with high quality Fleece Performance drain tube adapters.
( 3 )
$19.99
Trust Fleece Performance to bring you the best OE alternative parts you need. Their replacement head gaskets will ensure your engine gets the optimal reseal. They feature multi-layer steel (MLS) construction and meet or exceed OE specifications. Choose the one designed for your diesel engine.
Not Yet Reviewed
$119.99
—
$159.99
Fleece Performance transmission cooler and line kits are drop-in replacements that deliver a massive 2 times increase in heat rejection and efficiency vs. stock! Control your transmission temperatures and tow with confidence with the latest improvement for your truck from Fleece Performance. Engineered from the ground up, these kits provide you with the most efficient and highest performing transmission cooler on the market, plus heavy-duty transmission lines and AN fittings for a leak-free installation. Fleece transmission cooler and line kits are the most complete options available to keep your rig running cool! Select the kit designed for your truck. Additional features: * Drop-in replacement for the factory transmission cooler * No cutting or splicing of OE lines * 20 percent increase in face area of the transmission cooler vs. stock * 100 percent pressure and leak tested
Not Yet Reviewed
$859.00
—
$899.00
You demand more and Fleece Performance PowerFlo CP3 fuel pumps will supply more. How much more? Frankly, these upgraded pumps will support 750 RWHP with the proper complementing modifications. And, not only that, they will also eliminate the factory fuel flow restriction that begins at 3,000 rpm that usually costs you horsepower when you need it most. The law of supply and demand is simple and so is your choice for pumps that supply enough fuel to back 750 RWHP--Fleece PowerFlo CP3 pumps.
Not Yet Reviewed
$1,999.00
—
$2,549.00
Fleece Performance HP fuel line adaptation kits allows you to upgrade to a newer style pump. Each kit includes a new high-pressure fuel line, high-flow feed and return fittings, and feed line and hose clamps. Convert your 5.9L CP3 to a newer 6.7L CP3-style pump with a Fleece Performance exclusive adaptation kit.
Not Yet Reviewed
$119.99
Upgrade your leaking or corroded heater tubes with stainless steel tubes and a high-temperature silicone hose kit from Fleece Performance. This heater core kit contains everything needed to replace your heater lines from the block to the firewall. It's designed as a direct replacement for all 12-valve Cummins trucks originally equipped with air conditioning. Kit includes: * Stainless steel heater tube - replaces Cummins 3912086 * Stainless steel heater tube - replaces Cummins 3912087 * Silicone heater hose (straight tube to block) - replaces Cummins 3931522 * Silicone heater hose (90 degree tube to block) - replaces Cummins 3957649 * Silicone heater hoses (45 degree tubes to firewall) * Anodized billet aluminum hold-down clamps, billet aluminum standoff, and mounting hardware for both stock and aftermarket manifolds * Hose clamps Application notes: * This kit (S0486) is intended for use with trucks originally equipped with air conditioning. If your truck is not equipped with A/C, you'll need to supply your own 5/8 in. I.D. hose to run from the firewall ports to the stainless steel heater lines. * The silicone heater hose (tube to firewall) may require trimming for certain applications or to accommodate modifications made previously to the engine. * If your truck is equipped with an aftermarket exhaust manifold, the rear heater line standoff will not be utilized and an additional mounting bracket is provided in the kit.
Not Yet Reviewed
$379.00
If you've upgraded from your factory mechanical lift pump to an electric pump, a Fleece Performance mechanical fuel pump block-off plate will eliminate the void left by your stock pump. These billet aluminum block-off plates come complete with the bolts, cover, and O-ring for easy installation.
Not Yet Reviewed
$34.99
Fleece Performance thermostat housings have an auxiliary port with plug to allow you to customize your coolant routings. Two elbow options are available as direct replacements for specific model years of RAM trucks with 5.9L or 6.7L Cummins, and in specific Fleece coolant bypass kits.
Not Yet Reviewed
$129.99
Broken connectors, intermittent connections, or frayed wiring can cause your diesel to have poor reliability. Fleece Performance Engineering pigtails are produced in-house and offer an OEM+ quality repair for common failure points. Fleece Performance valve cover injector pigtails include heat-sealable butt-style connectors and a 6 in. pigtail. These replacements are manufactured with fully automated wire cutting and terminal crimping, ensuring the highest quality to get your truck or car back on the road quickly.
Not Yet Reviewed
$29.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
