Selected Filters


Loading...

Availability


DODGE PHOENIX Engines & Components

Part Groups

Results 1 - 22 of 22

WIX Filters Oil Filters

WIX oil filters play a vital role in in your vehicle's lubrication system, protecting your engine from premature wear. As gearheads know, every moving part in the engine requires clean oil! WIX oil filters trap more dirt than the leading national brand, and they keep filtering long after the competition has completely quit. WIX patented the first spin-on oil filter in 1954 and has been at the forefront of filter technology ever since. Canister-style oil filters feature strong, full-metal base plates to prevent leaks at the double seam under severe driving conditions. They also offer glass-enhanced media that improve each filter's ability to catch and hold engine-damaging dirt. Choose the WIX oil filter to fit your make and model—for a cleaner-running engine over many extra miles.

4.83 out of 5 stars ( 412 )

$7.99

Sealed Power CP-Series Rod Bearings

Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.

4.6 out of 5 stars ( 122 )

$8.99

—

$9.99

Summit Racing™ Extended Life Oil Filters

Summit Racing™ extended-life oil filters keep your engine free from contaminants. Our canister-style filters feature proprietary synthetic filter media that offers high filtration and low restriction—longer. These economical oil filters deliver up to 10,000 miles of engine protection. Order the model recommended for your vehicle and engine application. Summit Racing™ extended-life oil filters feature: * Durable 0.5mm thick steel canister for withstanding high operating pressures * High-capacity can design for trapping and holding dirt * 98 percent multi-pass particle removed efficiency * High-quality pressed steel baseplate * Silicone sealing gasket * Roll-tap formed threads to help prevent vibration fatigue * Silicone anti-drain-back valve that protects engine during start-up * Filter bypass relief valve if filter media becomes blocked * Textured powdercoating to ensure durability and deliver enhanced grip * Protective film over filter opening to prevent debris from contaminating filter prior to installation

4.72 out of 5 stars ( 50 )

$7.99

Summit Racing™ Magnetic Drain Plugs

These Summit Racing™ magnetic drain plugs will catch metal particles before they get to your bearings, saving you from early engine, transmission, or gear failure.

3.33 out of 5 stars ( 3 )

$4.99

Melling Valve Springs

Melling valve springs are perfect for stock rebuild or mild performance applications. They are manufactured from high-quality materials and fit in the stock location without any machine work. When you're replacing your valvetrain components, try Melling valve springs to keep your engine running smoothly.

4.29 out of 5 stars ( 17 )

$2.99

—

$7.99

Clevite P-Series Rod Bearings

P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.

4.79 out of 5 stars ( 312 )

$9.99

Melling Intermediate Shaft Bushings

Several Melling oil pump applications require the use of a Melling intermediate shaft bushing to provide additional support for the oil pump driveshaft while installed in the engine block. These high-quality bushing are available for specific applications. Select the one recommended for your engine.

5.0 out of 5 stars ( 1 )

$4.99

Pennzoil Oil Filters

Pennzoil provides quality oil filters for maximum engine protection. They help remove damaging dirt and grit from motor oil to clean, cool, seal, and lubricate the engine more effectively. Pennzoil oil filters exceed industry average efficiency ratings and meet or exceed automotive manufacturers' requirements for virtually all passenger cars and light trucks. Order the filter designed for your application.

3.67 out of 5 stars ( 3 )

$2.99

Trans-Dapt Performance Magnetic Oil Drain Plugs

Trans-Dapt offers these magnetic oil drain plugs for a variety of applications. They help protect your engine by capturing metal particles, keeping them from circulating through your engine and damaging your investment.

4.09 out of 5 stars ( 23 )

$9.99

Melling Mechanical Flat Tappet Lifters

Melling mechanical flat tappet lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit, and they are affordable, too.

5.0 out of 5 stars ( 3 )

$3.99

Melling Pushrods

Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.

4.64 out of 5 stars ( 89 )

$7.99

Melling Valve Spring Retainers

Melling valve spring retainers are a crucial part of the valve spring system that should be replaced when you're installing new engine valves. The retainers are constructed from steel and are engineered to meet or exceed OEM standards. Order the size recommended for your vehicle application.

3.67 out of 5 stars ( 3 )

$5.99

Standard Motor PCV Valves

Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.

4.63 out of 5 stars ( 56 )

$2.99

Dorman Oil Pan Drain Plugs

Do you have a rounded-off, stripped, or leaking drain plug? If so, then pick up one of these Dorman oil pan drain plugs. Designed and constructed to strict engineering quality standards, they are high-quality OE replacements coated for corrosion resistance and a long service life. Dorman's oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor, and money.

4.17 out of 5 stars ( 66 )

$3.99

—

$9.99

Melling Replacement Valve Locks

Melling replacement valve locks are designed for stock engines with standard retainers and pressure valve springs. Manufactured from stamped steel, they will replace your stock valve locks with no modifications. Rebuilding your valvetrain? Try these Melling replacement valve locks to eliminate any valvetrain failure.

5.0 out of 5 stars ( 8 )

$1.99

—

$5.99

Clevite H-Series Rod Bearings

Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.

4.79 out of 5 stars ( 177 )

$9.99

Melling Freeze Plugs

Seal up the casting core holes in your engine block and heads with Melling freeze plugs. They're manufactured from a variety of quality materials—such as brass, steel, and stainless steel—and offered in different diameters and depths to fit your specific application. These expansion plugs help protect against cracks caused by the pressure of frozen coolant and in regular operation will ensure that all vital fluids stay in the engine, where they belong. They are available for a wide range of makes and models, and can be ordered individually or in a multi-piece kit.

4.55 out of 5 stars ( 179 )

$8.99

Enginetech Rebuilders Valves

For about the same cost of reclaiming valves, you can install brand new Enginetech Rebuilders valves. The purpose of these patented Enginetech Rebuilders valves is to help simplify engine rebuilding by salvaging worn cylinder heads and reducing the need for expensive parts like valve seats and springs. Designed with oversized heads and stems, and a lowered keeper groove, these specialized valves create a more efficient and cost-effective rebuild process. The Enginetech one-piece intake valves are made from HNV-3 high alloy valve steel (often used for exhaust valves). All of the valve stems are either triple chrome plated or gas nitrided. Enginetech even goes a step further and hardens every valve tip to 50HRC minimum. The Enginetech exhaust valves are also a one-piece design. All Rebuilder's exhaust valves are made from EV-8 or EV-12 stainless steel. Again, like their intake valves, all stems are triple chrome plated or gas nitrided. Wafer tips, hardened to 50RHc, are inertia welded to every tip. Select the valves you need for your engine rebuild.

5.0 out of 5 stars ( 2 )

$8.99

Enginetech Engine Expansion Plug Kits

Enginetech offers engine expansion plug kits for a variety of car, truck, SUV, high performance, and marine applications. Machined from brass or steel, the kits include a variety of sizes to seal whatever ports need to be closed off. The plugs are produced in accordance with factory specs to ensure proper fit and performance. They meet or exceed OE quality standards. Order the kit recommended for your engine. Expansion plugs (or freeze plugs) serve two primary purposes: to block coolant leaks from internal passages, and to protect the engine block from cracking if the coolant inside freezes and expands. The plugs are designed to "pop out" under the pressure of expanding ice, preventing more severe damage, like a cracked block.

5.0 out of 5 stars ( 1 )

$6.99

—

$7.99

Melling Heavy-Duty Intermediate Driveshafts

Melling Automotive Products manufactures a complete line of heavy-duty oil pump intermediate driveshafts. These shafts are made of stress- and fatigue-proof steel for maximum strength and durability. They're available for thousands of vehicle and engine family applications.

4.72 out of 5 stars ( 189 )

$2.99

Melling Engine Expansion Plug Kits

Melling engine expansion plug kits come with everything needed to replace the leaky "freeze" plugs on your current engine. When you have the motor out of the chassis, it's the ideal time to update the plugs before they start leaking. Order the kit recommended for your application—and stay ahead of the game with Melling!

3.93 out of 5 stars ( 15 )

$7.99

Holstein Parts PCV Valves

Holstein Parts positive crankcase ventilation (PCV) valves are direct Original Equipment replacements that regulate crankcase air pressure, balance emissions, and prevent harmful oil vapors from clogging your intake. They ensure smooth engine idling, maximize fuel efficiency, and protect engine oil seals from degradation. Additional PCV valve details: * OE-Match Engineering: Designed for a flawless, direct fit that mimics original factory parts for trouble-free installation * High-Durability Materials: Crafted with premium, heat-resistant components engineered to withstand severe engine operating temperatures * Optimal Flow Rates: Calibrated exactly for specific manufacturer requirements to prevent issues like rough idling, oil consumption, and check engine lights * If your vehicle is exhibiting symptoms of a failing valve—such as high oil consumption or rough idle—replacing it with a Holstein valve quickly restores factory-level emission performance and smooth operation

Not Yet Reviewed

$4.99

  • 1
  • Page 1 of 1