Availability
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 49 )
$799.91
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z36 Truck and Tow brake upgrade kits with calipers are recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. These brake pad, rotor, and caliper kits come with everything you need, including premium stainless steel hardware, for an easy, bolt-on installation. PowerStop's Z36 Extreme low-dust ceramic brake pads are reinforced with carbon fiber to provide severe-duty stopping power without sacrificing everyday drivability. They are paired with drilled, slotted, and zinc plated rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. The bright red powdercoated calipers are not only protected against corrosion, but also stand out behind your wheels. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, choose easy and affordable, bolt-on performance upgrades—PowerStop Z36 Truck and Tow caliper brake kits.
( 545 )
$946.99
—
$964.99
Manufacturer Rebate
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 538 )
$773.95
—
$881.65
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 487 )
$869.99
aFe Twisted Steel headers are constructed of 409 stainless steel tubing with thick, CNC-machined flanges to ensure a leak-free seal. They incorporate a merge collector design, reducing the turbulence that occurs when using the traditional form collector-style designs. The performance gains are obvious when coupled with a high-flow Y-pipe. The aFe headers feature a tuned length primary that is out-flowing the stock manifolds by as much as 46 percent. Order the style and configuration tailored to your vehicle and engine application.
( 20 )
$836.00
—
$1,075.00
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$769.99
aFe Track Series carbon fiber Pro 5R air intake systems are open-element designs displaying massive air filters and carbon fiber intake tubes. Laid out to fit each specific make and model available, the systems outflow factory intakes, deliver a more aggressive sound, and add plenty of style for under your hood. aFe Track Series carbon fiber systems may feature: * Lightweight high-gloss, clearcoated 100 percent twill weave carbon fiber tubes * Large pre-oiled Pro 5R 5-layer washable/reusable high performance air filter * Stainless steel clamps, silicone couplers, and hardware * Housings made from XLPE (cross-linked polyethylene) polymer minimize warm engine air for maximum performance * Aluminum heat shields are one-piece, lightweight, and powdercoated black—block performance-robbing engine heat * Unique (patent-pending) filter-to-housing interface using fewer parts than traditional systems for a hassle-free installation
( 2 )
$765.45
—
$1,006.95
DiabloSport inTune i3 Platinum PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 Platinum computer programmers come pre-loaded with industry-best Diablo tunes created by their experienced, professional calibrators. They, too, are performance enthusiasts addicted to horsepower and racing—and they appreciate the need for custom tunes to take their vehicles to the next level with additional modifications. inTune i3 Platinum units will get your ride "dialed-in," whether you've added a cam, headers, a supercharger, or more. The i3 performance programmers work hand-in-hand with CMR (Chip Master Revolution), allowing you (and the tuning shop of your choice) to tune specifically for your aftermarket modification—from there, the sky is the limit! You've made a significant investment in premium parts for your vehicle. Now let the DiabloSport inTune i3 Platinum computer programmers tie all the ingredients together to make your ride stand out! Order the model designed for your vehicle application.
( 2 )
$799.95
—
$849.95
Quick Time Performance Aggressor electric cutout pipes are vehicle-specific exhaust kits designed for easy installation. They've been created for each application for the best clearance, sound, and power. There's no need to figure out your install location; all of the guesswork has been done for you. Most kits eliminate the need for any welding at all. Enjoy a factory-quiet exhaust—and then, with the flip of a switch, unleash the beast! You are in control! Key features: * Electronic dual mode exhaust system * Total user control over power and sound * No custom fabrication Kits contain: * Aggressor cutout pipe kit * QTEC electronic valves * Wire harnesses * Dual position momentary switch * Hardware and gaskets * Instruction sheet
( 6 )
$847.96
—
$867.48
These MSD 6-Hemi ignition controllers fire the coils and control the timing on Hemis that are retro-fit with a carburetor or late model factory electronic fuel injection. You program two separate rev limits and have a single-step retard adjustment. The MSD 6-Hemi ignition controllers connect easily, directly to the coils, crankshaft, cam, and MAP sensors for a simple installation. Wiring harnesses for installing on factory EFI engines are sold separately.
Not Yet Reviewed
$849.95
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 12 )
$762.99
—
$999.99
Gibson headers are performance-tuned and engine-matched to unleash your vehicle's full potential. These headers are well-suited for lowered or raised pickups and tow vehicles—because the performance gains are engineered to come in at low and midrange rpm highway speeds. They feature mandrel-bent primary tubing for increased flow, and they bolt on quickly and easily. Installing Gibson headers will give you increased horsepower and response and a cooler-running engine. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Gibson headers are available in a variety of sizes, configurations, materials, and finishes. Order the model recommended for your vehicle.
( 174 )
$819.99
KMC KM444 Forged Mesa beadlock machined wheels are designed to withstand any terrain and outperform the elements. Mesa's raw machined finish lends itself to the no nonsense nature of the wheel and instead showcases its performance defining capabilities. From the harshest Nevada desert terrain to the southern tip of Baja California, outfit your truck or Jeep with a beadlock contender—KMC's KM444 Forged Mesa beadlock wheels. Key features and specs: * True beadlock construction * Raw machine finish * Offered in a 17 x 9 in. size * 25mm, 0mm, and -12mm offsets * 5-, 6-, and 8-lug patterns * 4.53, 5.0, and 5.98 backspacing
Not Yet Reviewed
$755.00
Made of 100 percent heavy-gauge aluminized steel, the Armor Lite Series exhaust systems from MBRP are designed to provide cost-conscious consumers with the same high-quality design and craftsmanship as the company's other systems—but at a value price. Armor Lite is suitable for areas with moderate environmental conditions. The high-flow performance systems maximize exhaust flow so your engine keeps its cool with lower exhaust temperatures. The result is greater fuel efficiency, more torque and horsepower, increased throttle response, and a sound that is pure MBRP. These bolt-on systems include stainless steel tips and welded on hangers. Order the model designed to fit your application.
( 13 )
$1,029.99
Corsa carbon fiber DryTech 3-D air intakes blend aesthetics and engineering to deliver in a single package. The intakes efficiently direct airflow from the filter to the throttle body. Streamlining the airflow eliminates any calibration concerns, and helps increase throttle response. Features include: * 100 percent carbon fiber construction * Outflows stock intake creating more horsepower and torque * DryTech 3-D synthetic dry filter
( 6 )
$758.99
On Sale
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 39 )
$755.99
DiabloSport Trinity 2 EX Platinum PCM swaps saves factory settings and returns easily to stock. Trinity T2 Platinum PCM swaps are designed for those who want the best of both worlds, pre-loaded, high performance tunes in addition to custom tuning capability. The T2 Platinum is already equipped with some of the best tuning right out of the box, but DiabloSport knows you like to bolt-on upgrades and extract every bit of horsepower out of your vehicle. That is where CMR custom tuning comes in. Their nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. These kits offer the most advanced performance programmer and monitoring setup of its kind. Featuring a high-resolution, 5 in. capacitive touch screen, full swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. Taking advantage of DiabloSports cutting-edge PCM Swap program allows you to focus on the sleek, new look with T2, while enjoying power and improved drivability, and the swap process is seamless, affordable, and best-in-class.
( 2 )
$899.00
—
$1,099.95
Corsa carbon fiber MaxFlow 5 air intakes blend aesthetics and engineering to deliver in a single package. The intakes efficiently direct airflow from the filter to the throttle body. Streamlining the airflow eliminates any calibration concerns, and helps increase throttle response. Features include: * 100 percent carbon fiber construction * Outflows stock intake creating more horsepower and torque * MaxFlow 5 oiled cotton gauze filter
Not Yet Reviewed
$758.99
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$876.99
—
$1,156.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 37 )
$999.99
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. PowerStop's Z23 Evolution Sport brake upgrade kits with calipers comes with everything you need--pads, rotors, calipers, and premium stainless steel hardware for an easy, bolt-on upgrade for your daily driver. Along with increased braking power, the carbon fiber ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with drilled, slotted, and zinc plated rotors to ensure a cool, smooth ride that protects against rust and corrosion, while the powdercoated calipers not only protect against corrosion, but also stand out behind your wheels. Give your daily driver the easy and affordable performance upgrade it deserves--PowerStop Z23 Evolution Sport caliper brake kits.
( 231 )
$907.99
—
$975.96
Granatelli Motor Sports Pro Series Xtreme coil packs output a whopping 65,000 V, making them the undisputed king of coils. Specifically designed for supercharged, turbocharged, and high-level nitrous applications, these Xtreme coils will not suffer the spark blowout common in weaker coils. And, thanks to Granatelli's patented isolator rings, there is 0 ohm resistance and no RFI/EMI interference. Up your engine's power to perform with a set of Pro Series Xtreme coil packs from Granatelli Motor Sports.
( 13 )
$845.23
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
