Availability
Replace your worn or ticking lifters with premium-quality valve lifters from Crown Automotive. They're available in a variety of hydraulic styles—such as flat tappet, roller, and lash adjuster. Order the model designed for fitment on your specific vehicle.
( 2 )
$13.99
—
$146.99
Crown Automotive rocker arms are direct-fit OE-style replacement parts for your Jeep. Rocker arms are designed to open and close at precise moments to allow the engine to run efficiently at all speeds. If you need rocker arms, then you need Crown Automotive parts. They are developed to deliver optimal performance and can withstand today's driving challenges.
( 9 )
$14.99
—
$38.99
Crown Automotive fuel injectors supply optimum fuel efficiency for your engine. These quality components deliver maximum spraying action to give your ride the power it needs when it needs it most. The units are available for a wide range of vehicles—including many Jeep and Mopar family models. Give your vehicle a "shot" at peak performance with Crown Automotive fuel injectors.
( 4 )
$33.99
—
$99.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$9.99
—
$175.99
Stop overheating! Crown Automotive mechanical water pumps are direct-fit replacements for a vital part required to circulate coolant around your engine. When your pump begins to leak coolant or becomes noisy, Crown OE-style pumps will get you cooled down and back on the road with confidence. Order the water pump designed to fit your application.
( 12 )
$95.99
—
$188.99
If your oil filter connector has stripped threads, it can cause a major oil leak. Replace a worn or aging oil filter adapter connector with a new one from Crown Automotive to keep your engine running properly and your garage floor and driveway clean. These connectors are direct replacement OE-style oil filter adapter parts.
( 10 )
$6.99
Replace your leaking thermostat housings with ones from Crown Automotive. They offer a quality selection to fit several applications. Keep your coolant where it belongs and avoid overheating issues with one of Crown's thermostat housings.
( 3 )
$16.99
—
$33.99
Counter vibrations with Crown Automotive harmonic balancers. With these dampers attached, destructive torsional vibrations will be reduced, and this will help extend the life of your crankshaft. Crown has a selection of OE-fitting replacements made of iron and powdercoated. There is a lot of power and torque produced under the hood of your vehicle and Crown Automotive harmonic balancers will keep it all safely under control.
( 23 )
$45.99
—
$77.99
Contamination, leakage, and age are all factors that can lead to transmission and filter issues. Crown Automotive transmission filters are designed and built to OEM specs for easy fitment and reliable service. Old or contaminated transmission oil can cause major issues for the transmission. Crown Automotive transmission filters are available in various styles for direct fitment on many vehicles, including submodels from Jeep, Chrysler, Dodge, and Ram. Units are sold individually—or as a kit with gaskets. Encourage better performance with high-quality filters from Crown!
( 2 )
$42.99
That whining and grinding noise down near the clutch isn't going away—until you address the problem. When the pilot bearing on your vehicle is damaged or worn-out, replace it with a new unit from Crown Automotive. These bearings or bushings are designed and built to OEM specs for excellent fit and reliable performance. They're available in a variety of styles for fitment on specific vehicle applications. Silence the excess noise with Crown Automotive pilot bearings.
( 9 )
$17.99
Crown Automotive automatic transmission shift solenoids will efficiently control the flow of transmission fluid and restore smooth gear changes. Covering Jeep, Chrysler, and Dodge vehicles, they are built from quality materials and with fit and function just like the originals. No hardware is included; reuse existing hardware.
Not Yet Reviewed
$69.99
Crown Automotive cradle bushings will restore the dampening of vibrations from wheel/road interaction and engine operation. Offered in several designs for specific Jeep and Dodge vehicles, each one is constructed from quality steel and rubber. Choose the one designed for your vehicle.
( 1 )
$35.99
Crown Automotive offers a wide range of replacement parts for Jeeps—including these HVAC blend door actuators. They control the position of the vents that control the flow of air into your vehicle's passenger area. When the blend door actuators are not working properly, this can result in the heating or the air conditioning failing to enter the cabin. Order the model recommended for your application.
Not Yet Reviewed
$34.99
Crown Automotive timing chain sets will increase your drivetrain power and efficiency during off-road exploration and everyday commutes. Depending on the set you choose, these replacement kits can include components such as steel crank and cam sprockets, a timing chain, gears, gaskets, and more. Crown timing chain sets are available for a wide range of vehicles, including many Jeep and Mopar models.
( 16 )
$113.99
—
$373.99
MAP (Manifold Absolute Pressure) sensors which fail may cause the engine to have a too rich or lean fuel mixture condition. Crown Automotive MAP sensors restore data transmission to regulate timing control and fuel delivery. They convert engine vacuum/manifold pressure to an electrical signal so that the computer knows how much load the engine is under. This data is the basis for calculating values which keep your vehicle in top running order.
( 4 )
$19.99
—
$40.99
Whether you're doing preventive maintenance or you hear that old familiar whine, turn to Crown Automotive differential carrier bearings to help restore a quiet ride. These oil bath bearings will keep differentials or axles spinning straight down the path. Crown differential carrier bearings are sold individually or as a kit, and are available for a wide range of vehicles.
( 4 )
$15.99
—
$206.99
Crown Automotive valve locks are keepers! The stamped steel parts are small but necessary, and offer the proper fit and function you expect and need. Their engine valve spring retainer locks are available for many specific Jeep, Dodge, Ram, Chrysler applications.
Not Yet Reviewed
$1.99
—
$2.99
Crown Automotive coolant temperature sensors are a top-priority replacement for any vehicle. They're constructed out of high-quality materials and provide you with accurate coolant temperature data to the engine management system. When your vehicle's sensor is malfunctioning, you may experience inaccurate gauge functions, an overheating engine, internal engine damage, or excessive fuel consumption. All of these major issues can be solved with one simple little coolant temperature sensor from Crown Automotive.
( 10 )
$13.99
—
$25.99
When your original seals become hard and brittle, replace your valve cover grommets with Crown Automotive quality replacement parts for your Jeep. They are well-made, a snug direct fit replacement, and will install easily. Your seals may look fine, but if you're noticing a little oil on top, stop that leak with grommets from Crown.
( 17 )
$3.99
Crown Automotive timing cover gaskets will create a working seal between the timing cover and the engine block. After all, oil leaks can damage your gaskets, in which case they can no longer protect the timing belt and need to be replaced. These gaskets may be made from standard material, a plastic/rubber-style, or a silicon/steel seal. Crown helps you to get the perfect components for your application to protect your timing chain and gears.
( 1 )
$1.99
—
$38.99
Crown Automotive stocks differential carriers that will keep your vehicle moving. These case-only selections feature rugged steel construction and are available in limited slip and open styles. Replace or build the power to keep your wheels turning with help from Crown differential carriers.
( 2 )
$108.99
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM"--the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive transfer case yokes, so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you're on a trail ride or hot rodding on the street, always be prepared with Crown Automotive transfer case yokes.
( 2 )
$64.99
Crown Automotive carries a variety of exhaust manifold gaskets to meet your specific sealing requirements. No matter if you're looking for composite, multi-layer steel, paper, or steel core laminate, Crown offers precise fitments to service many Jeep, Chrysler, Dodge, and related vehicles. The exhaust manifolds are precision-cut OE replacements, ensuring a leak-free seal for your application.
( 14 )
$9.99
—
$18.99
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 92 )
$162.99
—
$259.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
